Slightly Used Archives - Nitrolink https://gonitrolink.com/condition/slightly-used/ Racing Components Wed, 03 Jun 2026 22:31:16 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 174609834 AJPE Billet 392 Hemi Heads https://gonitrolink.com/shop/engine/ajpe-billet-392-hemi-heads/ Wed, 03 Jun 2026 22:31:14 +0000 https://gonitrolink.com/?post_type=product&p=24116 AJPE Billet 392 Hemi Heads

Serviced and ready to run!!! Is exactly what you'll find when this "complete" set of

AJPE Billet 392 Hemi Heads show up on your doorstep! This slightly used set is in great shape and free of any damage or repairs. And ready to work with your 6 bolt style intake manifold. They're loaded with a slightly used set of beadlock groove Manley 2.125" diameter titanium intakes that measure 5.350" long (5/16" stem). And a set of square groove Manley inconel 1.870" exhaust valves that measure 5.260" long (11/32" stem) with Manley titanium 10° locks & retainers. Plus, a slightly used set of PSI Triple Valve Springs are also included as well. The intake ports are o-ring equipped and the cylinder head surfaces are incredibly smooth and in great shape. Combustion chambers have o-rings installed and have never been blown out or burned thru with chambers having very little normal minimal wear. All valve seats and valve guides are in great shape. And we'll include a complete set of header & intake manifold studs to make this hard to find package even better! And as you probably know, your block must be equipped with head studs, not head bolts. And YOU CANNOT RUN WATER thru these heads.

Brand new, a loaded set identical to these will set you back right at $10,000 Bucks! But not here... Not today! This set is available immediately and ready to ship out today...

The Coolest Race Parts on the Planet + Unmatched Customer Service = GoNitrolink.com

Priced to move at: Only $3995.00

Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.

The post AJPE Billet 392 Hemi Heads appeared first on Nitrolink.

]]> AJPE Billet 392 Hemi Heads

Serviced and ready to run!!! Is exactly what you’ll find when this “complete” set of

AJPE Billet 392 Hemi Heads show up on your doorstep! This slightly used set is in great shape and free of any damage or repairs. And ready to work with your 6 bolt style intake manifold. They’re loaded with a slightly used set of beadlock groove Manley 2.125″ diameter titanium intakes that measure 5.350″ long (5/16″ stem). And a set of square groove Manley inconel 1.870″ exhaust valves that measure 5.260″ long (11/32″ stem) with Manley titanium 10° locks & retainers. Plus, a slightly used set of PSI Triple Valve Springs are also included as well. The intake ports are o-ring equipped and the cylinder head surfaces are incredibly smooth and in great shape. Combustion chambers have o-rings installed and have never been blown out or burned thru with chambers having very little normal minimal wear. All valve seats and valve guides are in great shape. And we’ll include a complete set of header & intake manifold studs to make this hard to find package even better! And as you probably know, your block must be equipped with head studs, not head bolts. And YOU CANNOT RUN WATER thru these heads.

Brand new, a loaded set identical to these will set you back right at $10,000 Bucks! But not here… Not today! This set is available immediately and ready to ship out today…

The Coolest Race Parts on the Planet + Unmatched Customer Service = GoNitrolink.com

Priced to move at: Only $3995.00

Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.

The post AJPE Billet 392 Hemi Heads appeared first on Nitrolink.

]]> 24116 BAE 426 Hemi Fuel Heads https://gonitrolink.com/shop/engine/bae-426-hemi-fuel-heads-2/ Mon, 01 Jun 2026 23:03:42 +0000 https://gonitrolink.com/?post_type=product&p=24093 BAE 426 Hemi Fuel Heads

Check out this "complete" set of BAE 426 Hemi Fuel Heads ready for the next Funny Car Chaos event, or your Nostalgia Top Fuel Dragster, Nostalgia Nitro Funny Car, Blown Fuel Altered, Nostalgia A/Fuel, 7.0 Pro, Drag Boat, Tractor Puller and so on. This slightly used set is in great shape and free of any damage or repairs. And works with your standard deck Keith Black, BAE, or TFX Rodeck cast or billet block, using your .100 tall fuel head style manifold. They're the 6 bolt, .100 tall style, loaded with a slightly used set of beadlock groove Manley 2.450 titanium intakes (11/16" stem). And Manley inconel 1.925 exhaust valves (3/8" stem) with Victory titanium retainers and the Manley lash lock system. Plus, a slightly used set of PAC Triple Valve Springs are also included as well. And we'll throw in a complete set of inner head studs, header studs and rocker stand studs to make this deal that much better! Rocker stand dowel pins are the standard 3/8" size and the exhaust flange pattern is also standard and will accommodate most any brand of Hemi fuel head style header, however will not interchange with headers off of fatheads. And as you probably know, your block must be equipped with head studs, not head bolts. And YOU CANNOT RUN WATER thru these heads. The intake ports are o-ring equipped and the cylinder head surfaces are incredibly smooth and in great shape. Combustion chambers have o-rings installed and have never been blown out or burned thru with chambers having very little normal minimal wear. All valve seats and valve guides are in great shape. And this set has provisions to run down nozzles if you choose. They're set up for dual (16 total) spark plugs. However, if your car is set up for 1 plug per cylinder (8 total) no problem... Just plug off 1 hole per cylinder and use your single plug valve covers. Please note: These BAE Fuel Heads are not the "Fatheads" like the A/Fuel Dragsters are running.

Brand new, a loaded set identical to these will set you back right at $10,000 Bucks! But not here... Not today! This set is available immediately and ready to ship out today...

The road to the winners circle may be shorter than you think! GoNitrolink.com

Priced to move at: Only $3895.00

Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.

The post BAE 426 Hemi Fuel Heads appeared first on Nitrolink.

]]> BAE 426 Hemi Fuel Heads

Check out this “complete” set of BAE 426 Hemi Fuel Heads ready for the next Funny Car Chaos event, or your Nostalgia Top Fuel Dragster, Nostalgia Nitro Funny Car, Blown Fuel Altered, Nostalgia A/Fuel, 7.0 Pro, Drag Boat, Tractor Puller and so on. This slightly used set is in great shape and free of any damage or repairs. And works with your standard deck Keith Black, BAE, or TFX Rodeck cast or billet block, using your .100 tall fuel head style manifold. They’re the 6 bolt, .100 tall style, loaded with a slightly used set of beadlock groove Manley 2.450 titanium intakes (11/16″ stem). And Manley inconel 1.925 exhaust valves (3/8″ stem) with Victory titanium retainers and the Manley lash lock system. Plus, a slightly used set of PAC Triple Valve Springs are also included as well. And we’ll throw in a complete set of inner head studs, header studs and rocker stand studs to make this deal that much better! Rocker stand dowel pins are the standard 3/8″ size and the exhaust flange pattern is also standard and will accommodate most any brand of Hemi fuel head style header, however will not interchange with headers off of fatheads. And as you probably know, your block must be equipped with head studs, not head bolts. And YOU CANNOT RUN WATER thru these heads. The intake ports are o-ring equipped and the cylinder head surfaces are incredibly smooth and in great shape. Combustion chambers have o-rings installed and have never been blown out or burned thru with chambers having very little normal minimal wear. All valve seats and valve guides are in great shape. And this set has provisions to run down nozzles if you choose. They’re set up for dual (16 total) spark plugs. However, if your car is set up for 1 plug per cylinder (8 total) no problem… Just plug off 1 hole per cylinder and use your single plug valve covers. Please note: These BAE Fuel Heads are not the “Fatheads” like the A/Fuel Dragsters are running.

Brand new, a loaded set identical to these will set you back right at $10,000 Bucks! But not here… Not today! This set is available immediately and ready to ship out today…

The road to the winners circle may be shorter than you think! GoNitrolink.com

Priced to move at: Only $3895.00

Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.

The post BAE 426 Hemi Fuel Heads appeared first on Nitrolink.

]]> 24093 Used Blower Starter https://gonitrolink.com/shop/starting-line/used-blower-starter/ Tue, 19 May 2026 21:53:21 +0000 https://gonitrolink.com/?post_type=product&p=24032

IN STOCK & READY TO SHIP!!!

Used Blower Starter

Here's another quality component for all our valued customers on a budget! And when it comes to "go time" on the starting line, then lets get this slightly Used Blower Starter pressed into service on your team! It's in great shape, free of any damage with normal use and could work with your 36 or 48 volt battery pack. It was recently tested, good to go and equipped with an aluminum cage and hand wheel. And the great news is, this one features the black, universal style anderson plugs that interchanges with any of the other color plugs out there. And this upgraded feature alone could possibly save you on the starting line if you ever need to use another teams battery pack at the last second. So, if you're ready to save BIG TIME not buying new elsewhere! Grab this one up today, right here on our website... Just a couple clicks... Done!

The post Used Blower Starter appeared first on Nitrolink.

]]>

IN STOCK & READY TO SHIP!!!

Used Blower Starter

Here’s another quality component for all our valued customers on a budget! And when it comes to “go time” on the starting line, then lets get this slightly Used Blower Starter pressed into service on your team! It’s in great shape, free of any damage with normal use and could work with your 36 or 48 volt battery pack. It was recently tested, good to go and equipped with an aluminum cage and hand wheel. And the great news is, this one features the black, universal style anderson plugs that interchanges with any of the other color plugs out there. And this upgraded feature alone could possibly save you on the starting line if you ever need to use another teams battery pack at the last second. So, if you’re ready to save BIG TIME not buying new elsewhere! Grab this one up today, right here on our website… Just a couple clicks… Done!

The post Used Blower Starter appeared first on Nitrolink.

]]> 24032 Turn-Key Race Trailer https://gonitrolink.com/shop/misc/turn-key-race-trailer-2/ Tue, 19 May 2026 19:54:31 +0000 https://gonitrolink.com/?post_type=product&p=23919 Turn-Key Race Trailer

If you're looking for a nice, dependable basic style race trailer to get you back and forth to the races without all the expensive bells & whistles, then take a look at the "budget friendly" price on this one...
This Turn-Key Race Trailer is slightly used, in nice shape and outfitted with just the right amount of options to not only keep the cost down. But also offer your race team the "important" tools required to transport your valuable cargo efficiently to the next event. It tows straight, is white in color and ready for your sponsor's logo, lettering, or vinyl wrap if you choose... So let's get to it!!!

About the Trailer...

2014 Continental Cargo 28' Race Trailer
• Usable Floor Space measures: 306" long x 81" wide (between fender wells)
• Rear Door measures: 95.5" wide x 80" tall
• Double Side Doors measures: 77" tall x 46" wide
• Multiple Overhead Aluminum Cabinets
• Drivers Fire Suit/Helmet Cabinet
• Aluminum Work Bench 71" long x 23 1/2" deep
• Roof Air Conditioner
• Tool Boxes
• 12v Interior Lighting & 110V Outlet
• Multiple Floor Tie Down Anchors
• Multiple Side D-Ring Anchors
• Coin Flooring
• Fuel Jug Holder
• Tie Down & Aerosol Can Holders
• Spare Tire Compartment in Floor
• Adjustable Roof Vent
• Fold Down Cable Assist Rear Door
Fold Up Aluminum Ramp 3' long x 80" wide
• Side Door Aluminum Step
• LED Outside Pit Lighting
• Outside 110V Outlet
• Dual Axles
• Custom Aluminum Wheels
• Electric Brake System
• Electric Trailer Jack
• And Much More...

This complete basic style Race Trailer is turn-key, race ready and available immediately. And is sure to save its new owner thousands of dollars from buying new. And countless hours not having to set one up from scratch... Now you're ready to hit the road and join the 2026 season!!!

Priced to move at: Only $18,500 OBO

For more info, or to see in person call Brandon at: (916) 425-1427 anytime!

The post Turn-Key Race Trailer appeared first on Nitrolink.

]]> Turn-Key Race Trailer

If you’re looking for a nice, dependable basic style race trailer to get you back and forth to the races without all the expensive bells & whistles, then take a look at the “budget friendly” price on this one…
This Turn-Key Race Trailer is slightly used, in nice shape and outfitted with just the right amount of options to not only keep the cost down. But also offer your race team the “important” tools required to transport your valuable cargo efficiently to the next event. It tows straight, is white in color and ready for your sponsor’s logo, lettering, or vinyl wrap if you choose… So let’s get to it!!!

About the Trailer…

2014 Continental Cargo 28′ Race Trailer
• Usable Floor Space measures: 306″ long x 81″ wide (between fender wells)
• Rear Door measures: 95.5″ wide x 80″ tall
• Double Side Doors measures: 77″ tall x 46″ wide
• Multiple Overhead Aluminum Cabinets
• Drivers Fire Suit/Helmet Cabinet
• Aluminum Work Bench 71″ long x 23 1/2″ deep
• Roof Air Conditioner
• Tool Boxes
• 12v Interior Lighting & 110V Outlet
• Multiple Floor Tie Down Anchors
• Multiple Side D-Ring Anchors
• Coin Flooring
• Fuel Jug Holder
• Tie Down & Aerosol Can Holders
• Spare Tire Compartment in Floor
• Adjustable Roof Vent
• Fold Down Cable Assist Rear Door
Fold Up Aluminum Ramp 3′ long x 80″ wide
• Side Door Aluminum Step
• LED Outside Pit Lighting
• Outside 110V Outlet
• Dual Axles
• Custom Aluminum Wheels
• Electric Brake System
• Electric Trailer Jack
• And Much More…

This complete basic style Race Trailer is turn-key, race ready and available immediately. And is sure to save its new owner thousands of dollars from buying new. And countless hours not having to set one up from scratch… Now you’re ready to hit the road and join the 2026 season!!!

Priced to move at: Only $18,500 OBO

For more info, or to see in person call Brandon at: (916) 425-1427 anytime!

The post Turn-Key Race Trailer appeared first on Nitrolink.

]]> 23919 Used MSD Pro Mag 44 Kit https://gonitrolink.com/shop/mags-ignition/used-msd-pro-mag-44-kit/ Tue, 12 May 2026 01:02:48 +0000 https://gonitrolink.com/?post_type=product&p=23945 Used MSD Pro Mag 44 Kit

How about another "Super Saver Deal" right here for all you racers out there on a tight budget looking to save over $3,200 bucks not having to buy new!!!

Check out this slightly Used MSD Pro Mag 44 Kit that's ready to get the job done... And for way less! This one features the popular PN 8130 small cap style Magneto that's currently set up with the clock wise (CW) rotation. However, it can be changed to the hemi rotation easily if you choose. It's equipped with the RCD style drive set-up on the bottom. And also comes complete with a slightly used MSD Pro Mag 44 Points Box (PN 8145) and MSD Pro Mag 44 Red Coil (PN 8142). All items were recently tested and good to go, so you know your money was well spent here. All components are in nice shape, free of any damage or repairs with your common slight cosmetic scratches from normal minimal use. This complete kit is in stock, ready to ship today and definitely ready for showtime!

For this exact set up brand new, expect to pay right at $7,200 bucks! And that's not including the wire set. So, if you're looking to upgrade your existing ignition system, need a spare for race day, or about to start on that new project in the race shop... Then this money saving deal's definitely for you! Helping racers do what they do best... For less! GoNitrolink.com

The post Used MSD Pro Mag 44 Kit appeared first on Nitrolink.

]]> Used MSD Pro Mag 44 Kit

How about another “Super Saver Deal” right here for all you racers out there on a tight budget looking to save over $3,200 bucks not having to buy new!!!

Check out this slightly Used MSD Pro Mag 44 Kit that’s ready to get the job done… And for way less! This one features the popular PN 8130 small cap style Magneto that’s currently set up with the clock wise (CW) rotation. However, it can be changed to the hemi rotation easily if you choose. It’s equipped with the RCD style drive set-up on the bottom. And also comes complete with a slightly used MSD Pro Mag 44 Points Box (PN 8145) and MSD Pro Mag 44 Red Coil (PN 8142). All items were recently tested and good to go, so you know your money was well spent here. All components are in nice shape, free of any damage or repairs with your common slight cosmetic scratches from normal minimal use. This complete kit is in stock, ready to ship today and definitely ready for showtime!

For this exact set up brand new, expect to pay right at $7,200 bucks! And that’s not including the wire set. So, if you’re looking to upgrade your existing ignition system, need a spare for race day, or about to start on that new project in the race shop… Then this money saving deal’s definitely for you! Helping racers do what they do best… For less! GoNitrolink.com

The post Used MSD Pro Mag 44 Kit appeared first on Nitrolink.

]]> 23945 Used System 1 Dry Sump 426 Hemi Oil Pump https://gonitrolink.com/shop/engine/used-system-1-dry-sump-426-hemi-oil-pump/ Mon, 11 May 2026 22:09:18 +0000 https://gonitrolink.com/?post_type=product&p=23911 Used System 1 Dry Sump 426 Hemi Oil Pump

One critical component needed to get your race team to the winners circle is to have good oil pressure! So check out this slightly Used System 1 Dry Sump 426 Hemi Oil Pump that's similar to what many of the pro nitro teams on tour are running simply because of their outstanding flow characteristics, versatility and dependability. This one's in great condition inside and set up with a 1.8 and 2.1 gear size that could work well on your Nostalgia Nitro Funny Car, Alcohol Funny Car, Pro Mod, etc. It features you're standard 5/16" size drive and equipped with an AN -4 fitting for functions such as oil pressure gauge, Racepak or other on-board computer sensor, or rear oiling. Plus, two AN -12 IN/OUT fittings for the filter and a stainless hard loop line are included as well...

Personalized Customer Service second to none! GoNitrolink.com

The post Used System 1 Dry Sump 426 Hemi Oil Pump appeared first on Nitrolink.

]]> Used System 1 Dry Sump 426 Hemi Oil Pump

One critical component needed to get your race team to the winners circle is to have good oil pressure! So check out this slightly Used System 1 Dry Sump 426 Hemi Oil Pump that’s similar to what many of the pro nitro teams on tour are running simply because of their outstanding flow characteristics, versatility and dependability. This one’s in great condition inside and set up with a 1.8 and 2.1 gear size that could work well on your Nostalgia Nitro Funny Car, Alcohol Funny Car, Pro Mod, etc. It features you’re standard 5/16″ size drive and equipped with an AN -4 fitting for functions such as oil pressure gauge, Racepak or other on-board computer sensor, or rear oiling. Plus, two AN -12 IN/OUT fittings for the filter and a stainless hard loop line are included as well…

Personalized Customer Service second to none! GoNitrolink.com

The post Used System 1 Dry Sump 426 Hemi Oil Pump appeared first on Nitrolink.

]]> 23911 Dechellis 426 Hemi Rocker Assembly https://gonitrolink.com/shop/engine/dechellis-426-hemi-rocker-assembly/ Fri, 08 May 2026 19:09:08 +0000 https://gonitrolink.com/?post_type=product&p=23885 Dechellis 426 Hemi Rocker Assembly

So if you're running a Top Fuel or Nostalgia Dragster, Nitro or Alcohol Funny Car, AA/Fuel Altered, Doorslammer, Drag Boat, or Tractor Puller on Nitro, Alcohol, or Gas. And are in the market for an awesome set-up loaded with the works, then check out this slightly used Dechellis 426 Hemi Rocker Assembly. This hi-ratio set is loaded with RS2 billet stands and upgraded Titanium Shafts. And features Stage 5 (1.7) standard Intake Rockers. As well as a set of Stage 5 Exhaust Rockers. All Rockers are equipped with the larger 7/16" adjusters with the larger 3/8 ball, which is pretty cool, because now you don't have to switch wrenches etc; to adjust both your Intake & Exhaust Rockers. Everything's in nice shape with your common nicks and scratches from normal minimal wear. Outside surface, rocker tips, threads and so on are free of any damage or repairs. All adjusters, nuts, shims & springs are included and this set-up works with your BAE, Dart, or Alan Johnson Fuel Heads that bolt up to your Keith Black, BAE, or TFX Rodeck cast or billet block. However, if you're running "fat heads" like what the A/Fuel cars are running, (such as Brad 4's, 5's 6's, etc.) these will not adapt to your application. This set-up is complete, in stock and ready to bolt on and go racing!!! GoNitrolink.com

The post Dechellis 426 Hemi Rocker Assembly appeared first on Nitrolink.

]]> Dechellis 426 Hemi Rocker Assembly

So if you’re running a Top Fuel or Nostalgia Dragster, Nitro or Alcohol Funny Car, AA/Fuel Altered, Doorslammer, Drag Boat, or Tractor Puller on Nitro, Alcohol, or Gas. And are in the market for an awesome set-up loaded with the works, then check out this slightly used Dechellis 426 Hemi Rocker Assembly. This hi-ratio set is loaded with RS2 billet stands and upgraded Titanium Shafts. And features Stage 5 (1.7) standard Intake Rockers. As well as a set of Stage 5 Exhaust Rockers. All Rockers are equipped with the larger 7/16″ adjusters with the larger 3/8 ball, which is pretty cool, because now you don’t have to switch wrenches etc; to adjust both your Intake & Exhaust Rockers. Everything’s in nice shape with your common nicks and scratches from normal minimal wear. Outside surface, rocker tips, threads and so on are free of any damage or repairs. All adjusters, nuts, shims & springs are included and this set-up works with your BAE, Dart, or Alan Johnson Fuel Heads that bolt up to your Keith Black, BAE, or TFX Rodeck cast or billet block. However, if you’re running “fat heads” like what the A/Fuel cars are running, (such as Brad 4’s, 5’s 6’s, etc.) these will not adapt to your application. This set-up is complete, in stock and ready to bolt on and go racing!!! GoNitrolink.com

The post Dechellis 426 Hemi Rocker Assembly appeared first on Nitrolink.

]]> 23885 Used Blower Starter Cables https://gonitrolink.com/shop/starting-line/used-blower-starter-cables/ Wed, 06 May 2026 23:40:36 +0000 https://gonitrolink.com/?post_type=product&p=23856 Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!

Used Blower Starter Cables

Let's offer some more starting line equipment, to make sure we have you covered on race day! Check out this nice set of Used Blower Starter Cables that are ready to join your race team immediately! This set measures 10 feet long and could work well on the starting line if your using a remote battery pack that sits close to the car. They come complete with a black protective cover to help prevent cable damage. And the great news is, they're also equipped with the black, universal style anderson plugs that interchange with any of the other color plugs out there. And this upgraded feature alone could possibly save you on the starting line if you ever need to use another teams battery pack at the last second. Quality racing components offered 24/7 right here on our website! GoNitrolink.com

The post Used Blower Starter Cables appeared first on Nitrolink.

]]> Another “Nitrolink” Slightly Used MONEY SAVING OFFER!!!

Used Blower Starter Cables

Let’s offer some more starting line equipment, to make sure we have you covered on race day! Check out this nice set of Used Blower Starter Cables that are ready to join your race team immediately! This set measures 10 feet long and could work well on the starting line if your using a remote battery pack that sits close to the car. They come complete with a black protective cover to help prevent cable damage. And the great news is, they’re also equipped with the black, universal style anderson plugs that interchange with any of the other color plugs out there. And this upgraded feature alone could possibly save you on the starting line if you ever need to use another teams battery pack at the last second. Quality racing components offered 24/7 right here on our website! GoNitrolink.com

The post Used Blower Starter Cables appeared first on Nitrolink.

]]> 23856 Alan Johnson 392 Hemi Blower Manifold https://gonitrolink.com/shop/supercharger/alan-johnson-392-hemi-blower-manifold/ Thu, 30 Apr 2026 00:18:19 +0000 https://gonitrolink.com/?post_type=product&p=23813 Alan Johnson 392 Hemi Blower Manifold

Buy this one right here today... Without having to wait months for delivery!!! Check out this slightly used Alan Johnson 392 Hemi Blower Manifold for your nitro, alcohol, or gas burning Dragster, Funny Car, Altered, Drag Boat, or ? This one's the upgraded light weight magnesium 6 bolt style, that's in great shape and free of any damage or repairs. It measures right at 5 7/16" tall. With the Blower opening at the top measuring 4" wide by 13 5/8" long. It has provisions to run port nozzles if you choose. Otherwise, just plug them off. And it's also set up to run the standard, large size burst panel in the front (sold separately). This manifold is o-ring ready at the top and can work with most any 6-71 to 14-71 roots style superchargers. And could be used with any 392 Hemi 6 bolt style Cylinder Heads... Save more, Race more, Win more! GoNitrolink.com

The post Alan Johnson 392 Hemi Blower Manifold appeared first on Nitrolink.

]]> Alan Johnson 392 Hemi Blower Manifold

Buy this one right here today… Without having to wait months for delivery!!! Check out this slightly used Alan Johnson 392 Hemi Blower Manifold for your nitro, alcohol, or gas burning Dragster, Funny Car, Altered, Drag Boat, or ? This one’s the upgraded light weight magnesium 6 bolt style, that’s in great shape and free of any damage or repairs. It measures right at 5 7/16″ tall. With the Blower opening at the top measuring 4″ wide by 13 5/8″ long. It has provisions to run port nozzles if you choose. Otherwise, just plug them off. And it’s also set up to run the standard, large size burst panel in the front (sold separately). This manifold is o-ring ready at the top and can work with most any 6-71 to 14-71 roots style superchargers. And could be used with any 392 Hemi 6 bolt style Cylinder Heads… Save more, Race more, Win more! GoNitrolink.com

The post Alan Johnson 392 Hemi Blower Manifold appeared first on Nitrolink.

]]> 23813 Racepak -10 Flow Meter https://gonitrolink.com/shop/racepak/racepak-10-flow-meter/ Wed, 29 Apr 2026 21:59:51 +0000 https://gonitrolink.com/?post_type=product&p=23789 Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!

Racepak -10 Flow Meter

Helping your racing dollars go further is what we do best! And if you've been on the hunt for a slightly used Racepak -10 Flow Meter then get ready to save even more! This one's the aluminum style primarily recommended for nitro applications. It's in great shape with no damage or repairs. And was designed to deliver an accurate fuel flow reading allowing you to closely monitor the performance health (GPM) of your fuel pump. It can also confirm the function of your fuel timers and fuel system lean-outs. Or, it can be used to monitor your hydraulic clutch system flow if you choose. Brand new price is over $1400 bucks, so this budget friendly deal won't last!

When you think high performance turbine-style racing component... Think GoNitrolink.com

The post Racepak -10 Flow Meter appeared first on Nitrolink.

]]> Another “Nitrolink” Slightly Used MONEY SAVING OFFER!!!

Racepak -10 Flow Meter

Helping your racing dollars go further is what we do best! And if you’ve been on the hunt for a slightly used Racepak -10 Flow Meter then get ready to save even more! This one’s the aluminum style primarily recommended for nitro applications. It’s in great shape with no damage or repairs. And was designed to deliver an accurate fuel flow reading allowing you to closely monitor the performance health (GPM) of your fuel pump. It can also confirm the function of your fuel timers and fuel system lean-outs. Or, it can be used to monitor your hydraulic clutch system flow if you choose. Brand new price is over $1400 bucks, so this budget friendly deal won’t last!

When you think high performance turbine-style racing component… Think GoNitrolink.com

The post Racepak -10 Flow Meter appeared first on Nitrolink.

]]> 23789