super comp dragster tools Archives - Nitrolink

SCE 426 Hemi Copper Head Gaskets

nitrolink — Thu, 06 Aug 2026 19:47:43 +0000

SCE 426 Hemi Copper Head Gaskets

Let’s save you a few more bucks right here on a brand new set of SCE 426 Hemi Copper Head Gaskets so you’re definitely covered for the upcoming race weekend! These top quality gaskets are sold as a pair and work with the 4.187 bore size, and have a .050 thickness. When you think hi-performance racing consumables… Think GoNitrolink.com

Other sizes available. Call: (916) 425-1427 for details.

The post SCE 426 Hemi Copper Head Gaskets appeared first on Nitrolink.

BAE 426 Hemi Fuel Heads

nitrolink — Mon, 01 Jun 2026 23:03:42 +0000

BAE 426 Hemi Fuel Heads

Check out this “complete” set of BAE 426 Hemi Fuel Heads ready for the next Funny Car Chaos event, or your Nostalgia Top Fuel Dragster, Nostalgia Nitro Funny Car, Blown Fuel Altered, Nostalgia A/Fuel, 7.0 Pro, Drag Boat, Tractor Puller and so on. This slightly used set is in great shape and free of any damage or repairs. And works with your standard deck Keith Black, BAE, or TFX Rodeck cast or billet block, using your .100 tall fuel head style manifold. They’re the 6 bolt, .100 tall style, loaded with a slightly used set of beadlock groove Manley 2.450 titanium intakes (11/16″ stem). And Manley inconel 1.925 exhaust valves (3/8″ stem) with Victory titanium retainers and the Manley lash lock system. Plus, a slightly used set of PAC Triple Valve Springs are also included as well. And we’ll throw in a complete set of inner head studs, header studs and rocker stand studs to make this deal that much better! Rocker stand dowel pins are the standard 3/8″ size and the exhaust flange pattern is also standard and will accommodate most any brand of Hemi fuel head style header, however will not interchange with headers off of fatheads. And as you probably know, your block must be equipped with head studs, not head bolts. And YOU CANNOT RUN WATER thru these heads. The intake ports are o-ring equipped and the cylinder head surfaces are incredibly smooth and in great shape. Combustion chambers have o-rings installed and have never been blown out or burned thru with chambers having very little normal minimal wear. All valve seats and valve guides are in great shape. And this set has provisions to run down nozzles if you choose. They’re set up for dual (16 total) spark plugs. However, if your car is set up for 1 plug per cylinder (8 total) no problem… Just plug off 1 hole per cylinder and use your single plug valve covers. Please note: These BAE Fuel Heads are not the “Fatheads” like the A/Fuel Dragsters are running.

Brand new, a loaded set identical to these will set you back right at $10,000 Bucks! But not here… Not today! This set is available immediately and ready to ship out today…

The road to the winners circle may be shorter than you think! GoNitrolink.com

Priced to move at: Only $3895.00

Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.

The post BAE 426 Hemi Fuel Heads appeared first on Nitrolink.

Turn-Key Race Trailer

nitrolink — Tue, 19 May 2026 19:54:31 +0000

Turn-Key Race Trailer

If you’re looking for a nice, dependable basic style race trailer to get you back and forth to the races without all the expensive bells & whistles, then take a look at the “budget friendly” price on this one…
This Turn-Key Race Trailer is slightly used, in nice shape and outfitted with just the right amount of options to not only keep the cost down. But also offer your race team the “important” tools required to transport your valuable cargo efficiently to the next event. It tows straight, is white in color and ready for your sponsor’s logo, lettering, or vinyl wrap if you choose… So let’s get to it!!!

About the Trailer…

2014 Continental Cargo 28′ Race Trailer
• Usable Floor Space measures: 306″ long x 81″ wide (between fender wells)
• Rear Door measures: 95.5″ wide x 80″ tall
• Double Side Doors measures: 77″ tall x 46″ wide
• Multiple Overhead Aluminum Cabinets
• Drivers Fire Suit/Helmet Cabinet
• Aluminum Work Bench 71″ long x 23 1/2″ deep
• Roof Air Conditioner
• Tool Boxes
• 12v Interior Lighting & 110V Outlet
• Multiple Floor Tie Down Anchors
• Multiple Side D-Ring Anchors
• Coin Flooring
• Fuel Jug Holder
• Tie Down & Aerosol Can Holders
• Spare Tire Compartment in Floor
• Adjustable Roof Vent
• Fold Down Cable Assist Rear Door
Fold Up Aluminum Ramp 3′ long x 80″ wide
• Side Door Aluminum Step
• LED Outside Pit Lighting
• Outside 110V Outlet
• Dual Axles
• Custom Aluminum Wheels
• Electric Brake System
• Electric Trailer Jack
• And Much More…

This complete basic style Race Trailer is turn-key, race ready and available immediately. And is sure to save its new owner thousands of dollars from buying new. And countless hours not having to set one up from scratch… Now you’re ready to hit the road and join the 2026 season!!!

Priced to move at: Only $18,500 OBO

For more info, or to see in person call Brandon at: (916) 425-1427 anytime!

The post Turn-Key Race Trailer appeared first on Nitrolink.

Racepak -10 Flow Meter

nitrolink — Wed, 29 Apr 2026 21:59:51 +0000

Another “Nitrolink” Slightly Used MONEY SAVING OFFER!!!

Racepak -10 Flow Meter

Helping your racing dollars go further is what we do best! And if you’ve been on the hunt for a slightly used Racepak -10 Flow Meter then get ready to save even more! This one’s the aluminum style primarily recommended for nitro applications. It’s in great shape with no damage or repairs. And was designed to deliver an accurate fuel flow reading allowing you to closely monitor the performance health (GPM) of your fuel pump. It can also confirm the function of your fuel timers and fuel system lean-outs. Or, it can be used to monitor your hydraulic clutch system flow if you choose. Brand new price is over $1400 bucks, so this budget friendly deal won’t last!

When you think high performance turbine-style racing component… Think GoNitrolink.com

The post Racepak -10 Flow Meter appeared first on Nitrolink.

Weld “Aluma-Star” Pro Mod Front Wheels

nitrolink — Fri, 06 Feb 2026 19:50:28 +0000

Weld “Aluma-Star” Pro Mod Front Wheels

That awesome polished appearance, along with a money saving price!!! Is exactly what you’ll find right here with this next to new set of Weld “Aluma-Star” Pro Mod Front Wheels that are in stock and ready to ship immediately! And if you’re running a Pro Mod, Doorslammer, Bracket Car, or Show Car. And are looking to stay within a tight budget, then today’s your lucky day…

This set is the standard 15×3.5 size that fits the large Strange suspension style spindles. Both wheels are the one piece billet aluminum current style, with previsions to accept your front disc brakes (not included) if you’re running them. They’re NHRA “tech friendly” with SFI 15.2 tags included. And both wheels are in very nice shape with slight nicks/scratches from normal use. And a set of center caps, bearing races, bearings, seals and valve stems are also included to complete the package.

Why Buy New??? If you’ve had a chance to shop around lately for a brand new set of these from Weld Racing, then be prepared to kick down!!! They sell for close to $2500 Bucks a set! But don’t even think about spending that much here… Not today!!! Install your tires, then point this set toward the stripe at the other end… Then drop the hammer!

The post Weld “Aluma-Star” Pro Mod Front Wheels appeared first on Nitrolink.

Molinari Titanium Pedal Clutch

nitrolink — Fri, 07 Nov 2025 01:07:13 +0000

Molinari Titanium Pedal Clutch

Top of the line hi-performance is what you’re looking at right here with this state of the art upgraded Molinari Titanium Pedal Clutch that’s available immediately and ready to take your clutch program to the next level! This one’s the 10.5 size, 6 large stand style, that utilizes 3 disks. It was made by Molinari Racing Products and features an all titanium pressure plate, donut and 426 hemi flywheel. Plus, it’s as close to being brand new as you can get, with only 1 race! It’s free of any damage or repairs and comes complete with a slightly used set of ARP flywheel bolts and a dial indicator with case that are also included as well. And here’s more great news…

1. This one’s in stock and ready to ship immediately… Zero wait time!

2. Save almost a “grand” off the new price, buying this one right here!

3. The road to the winners circle is shorter than you think! GoNitrolink.com

Priced to move at only: $9500. + shipping.

Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.

The post Molinari Titanium Pedal Clutch appeared first on Nitrolink.

Racepak Pro 2 Computer System

nitrolink — Wed, 22 Oct 2025 00:45:10 +0000

Racepak Pro 2 Computer System

Check out this slightly used Racepak Pro 2 Computer System that’s ready to install on your Top Fuel Dragster, Nitro Funny Car, Blown Fuel Altered, Top Alcohol Dragster or Funny Car, A/ Fuel, Tractor Puller, Drag Boat and so on. And we’ll make sure your set up with some of the most popular functions so your team can start taking full advantage of all the valuable tuning data Racepak Systems have to offer… And lets get it done right here for one low price!

To start off, both the data logger and components are in very nice shape and free of any damage or repairs. In fact, we’ll throw in a bunch of brand new components (listed below) to make this deal that much better. This system is capable of recording Engine RPM, Individual Exhaust Temp, G-Meter, Blower Boost, Oil Pressure, Fuel Pressure and Nozzle Pressure as is. However, future upgrades can easily be added to monitor Fuel Flow, Manifold Temp, Pan Pressure, Drive Shaft Speed, Clutch Temp and a whole lot more later down the road if you choose. Data logger recording time is 200 seconds and this system can work with your Racepak Digital Dash (not included) if you choose. And the kit comes complete with Racepak Software, EGT Probes, Applicable Cables & Boxes and a brand new Removable SD Cartridge & Reader, brand new On/Off Switch, brand new Charger, brand new internal battery in the datalogger and everything you see in the photos.

A Pro 2 System, identical to this one brand new from Racepak sold for right at $11,000 bucks! But we’ll make sure you get set up for thousands less right here! So, get ready to save big time as this one’s priced to move and definitely ready to go to work…

All the right tools to get the job done on race day, right here! GoNitrolink.com

Priced to move at: Only $6795. + shipping.

Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.

The post Racepak Pro 2 Computer System appeared first on Nitrolink.

Vintage Keith Black Dual Oil Filter Adapter

nitrolink — Tue, 21 Oct 2025 20:00:26 +0000

Vintage Keith Black Dual Oil Filter Adapter

Pure nostalgia offered right here with this awesome Vintage Keith Black Dual Oil Filter Adapter that’s sure to help all our Cacklefest customers out there meet their requirements to only install the exact components that were used back in the day! This one’s slightly used, made of cast aluminum, in nice shape and free of any damage or repairs. And equipped with a set of fittings ready to work with your -12 size lines. Filter surface diameter measures

3 1/4″ round edge to edge and this one’s set up to work with any brand of the smaller style spin-on oil filters (not included) made to fit that diameter. Includes everything you see in the photos. And if you’re looking for more vintage items just like this one, then keep checking back… There’s more on the way! GoNitrolink.com

The post Vintage Keith Black Dual Oil Filter Adapter appeared first on Nitrolink.

RCD Valve Cover Breathers

nitrolink — Tue, 21 Oct 2025 00:51:23 +0000

RCD Valve Cover Breathers

Let’s get you set up with this slightly used set of quick disconnect RCD Valve Cover Breathers that are the popular 1 1/4″ size. And could work on pretty much any application out there requiring a breather set-up. And what’s cool about this set is that they’re equipped with the super trick locking pin set-up that helps keep the hose end connectors from twisting loose during competition. And as you can see by the photo’s, this set is in almost new condition, free of any cracks, or repairs with very little minimal wear. Mounting plates are the standard pattern as far as these go. And hose ends work with your 1 1/4″ diameter hose size. (Hose sold separately.) Brand new price for a pair identical to these will set you back right at $369 Bucks… But not here! Click on the “buy now” button below and start saving! Helping racers do what they do best… For less! GoNitrolink.com

The post RCD Valve Cover Breathers appeared first on Nitrolink.

Alan Johnson Stage 1 Nostalgia Cylinder Heads

nitrolink — Fri, 17 Oct 2025 22:44:15 +0000

Alan Johnson Stage 1 Nostalgia Cylinder Heads

Check out this “complete” set of Alan Johnson Stage 1 Nostalgia Cylinder Heads then you’ll know one of the reasons why many of the top nostalgia nitro teams on tour are laying down those kind of numbers on race day! This set is the current style, popular because they utilize the smaller intake & exhaust runners making them perfect for use in Nostalgia Top Fuel, Nostalgia Nitro Funny Car, Blown Fuel Altered, Nostalgia A/Fuel, 7.0 Pro, Drag Boat, Tractor Puller and so on. This slightly used set is the single plug style, set up to run 4 spark plugs per head. Both are in excellent shape and work with your standard deck TFX Rodeck, BAE, or Keith Black cast or billet block, using your standard deck fuel head style manifold. The intake ports are o-ring equipped and the cylinder head surfaces are incredibly smooth and in great shape. Combustion chambers have o-rings installed and have never been blown out or burned thru with chambers having very little normal minimal wear. All valve seats and valve guides are in nice shape. And they’re loaded with a slightly used set of Victory 2.375 titanium intake and Manley 1.925 exhaust valves, with Victory locks & retainers. And a set of Manley Dual Intake and PAC Triple Valve Springs are also included as well. Plus, we’ll include a complete set of inner head studs, intake manifold studs, header studs and valve cover studs to make this deal that much better! Rocker stand dowel pins are the standard 3/8″ size and the exhaust flange pattern is also standard and will accommodate most any brand of Hemi fuel head style header, however will not interchange with headers off of fatheads. And as you probably know, your block must be equipped with head studs, not head bolts. And YOU CANNOT RUN WATER thru these heads.

Please note: These AJ Fuel Heads are not the “Fatheads” like the A/Fuel Dragsters are running… So, if you’ve had a chance to shop around lately, then you know a brand new bare set identical to these will set you back almost $7000 Bucks! But don’t even think about spending that much here… This set is complete, available immediately and ready to ship out today. The road to the winners circle may be shorter than you think! GoNitrolink.com

Priced to move at: Only $4500.00 set.

Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.

The post Alan Johnson Stage 1 Nostalgia Cylinder Heads appeared first on Nitrolink.