Goodson Archives - Nitrolink https://gonitrolink.com/product_brands/goodson/ Racing Components Tue, 05 May 2026 23:35:03 +0000 en-US hourly 1 https://wordpress.org/?v=7.0.4 174609834 Cylinder Sleeve Flex-Hone Tools https://gonitrolink.com/shop/specialty-pit-tools/cylinder-head-hone-tool/ Fri, 09 Oct 2020 21:28:16 +0000 https://gonitrolink.com/?post_type=product&p=8736 Cylinder Sleeve Flex-Hone Tools

"Nitrolink" carries the popular bore sizes needed, so one of these Cylinder Sleeve Flex-Hone Tools can help make that job a little easier to deal with. They offer a quick, consistent "clean up" by removing peaks and imperfections on your cylinder walls for better performance! They're self-centering and self-aligning to the bore with each of the abrasive pads having independent suspension, allowing them to compensate accordingly to correct wear areas for a superior even surface finish. When ordering please use your actual cylinder inside diameter, as all Flex-Hones are produced over-sized and will adjust to work with your size sleeve.

Please specify bore size needed in the "options" menu below.

The post Cylinder Sleeve Flex-Hone Tools appeared first on Nitrolink.

]]> Cylinder Sleeve Flex-Hone Tools

“Nitrolink” carries the popular bore sizes needed, so one of these Cylinder Sleeve Flex-Hone Tools can help make that job a little easier to deal with. They offer a quick, consistent “clean up” by removing peaks and imperfections on your cylinder walls for better performance! They’re self-centering and self-aligning to the bore with each of the abrasive pads having independent suspension, allowing them to compensate accordingly to correct wear areas for a superior even surface finish. When ordering please use your actual cylinder inside diameter, as all Flex-Hones are produced over-sized and will adjust to work with your size sleeve.

Please specify bore size needed in the “options” menu below.

The post Cylinder Sleeve Flex-Hone Tools appeared first on Nitrolink.

]]> 8736 Bearing Scraper Tool https://gonitrolink.com/shop/specialty-pit-tools/de-burr-tool/ Fri, 09 Oct 2020 21:21:27 +0000 https://gonitrolink.com/?post_type=product&p=8732 Bearing Scraper Tool

Another "Nitrolink" specialty tool that's sure to make your job that much easier both at the race track or in your race shop! This brand new Bearing Scraper Tool is the perfect multi-purpose tool to add to your collection. It works excellent for shaving cam and babbit bearings to eliminate high spots after installation to ensure correct oil clearance. The Scraper blade measures 4" long and equipped with 3 cutting edges. And is mounted in a wire wound wood handle for strength and split resistance. Now you know exactly where to go for all your hard to find specialty tools. Order one right here today!

The post Bearing Scraper Tool appeared first on Nitrolink.

]]> Bearing Scraper Tool

Another “Nitrolink” specialty tool that’s sure to make your job that much easier both at the race track or in your race shop! This brand new Bearing Scraper Tool is the perfect multi-purpose tool to add to your collection. It works excellent for shaving cam and babbit bearings to eliminate high spots after installation to ensure correct oil clearance. The Scraper blade measures 4″ long and equipped with 3 cutting edges. And is mounted in a wire wound wood handle for strength and split resistance. Now you know exactly where to go for all your hard to find specialty tools. Order one right here today!

The post Bearing Scraper Tool appeared first on Nitrolink.

]]> 8732 Adjustable Magnetic Dial Indicator Base https://gonitrolink.com/shop/specialty-pit-tools/magnetic-stand/ Fri, 09 Oct 2020 21:20:11 +0000 https://gonitrolink.com/?post_type=product&p=8729 Adjustable Magnetic Dial Indicator Base

This next specialty tool is the perfect item for setting your camshaft, checking piston height, etc. This brand new Adjustable Magnetic Dial Indicator Base can work with most any type dial indicator (not included) and is basically like having an extra hand! The permanent magnetic base is equipped with an on-off switch that activates a super strong magnetic pull of 90 pounds. Once you activate the magnetic pull, this stand is NOT going to move! The base itself measures 2" x 2 1/2" x 2 1/4" total. And the vertical column measures 3/8" diameter x 7" high, with the adjustable arm measuring 7" long.

Choose Magnetic Base with or without fine adjustment in the "options" menu below.

The post Adjustable Magnetic Dial Indicator Base appeared first on Nitrolink.

]]> Adjustable Magnetic Dial Indicator Base

This next specialty tool is the perfect item for setting your camshaft, checking piston height, etc. This brand new Adjustable Magnetic Dial Indicator Base can work with most any type dial indicator (not included) and is basically like having an extra hand! The permanent magnetic base is equipped with an on-off switch that activates a super strong magnetic pull of 90 pounds. Once you activate the magnetic pull, this stand is NOT going to move! The base itself measures 2″ x 2 1/2″ x 2 1/4″ total. And the vertical column measures 3/8″ diameter x 7″ high, with the adjustable arm measuring 7″ long.

Choose Magnetic Base with or without fine adjustment in the “options” menu below.

The post Adjustable Magnetic Dial Indicator Base appeared first on Nitrolink.

]]> 8729 Piston Ring Filer Tool https://gonitrolink.com/shop/specialty-pit-tools/ring-filer-tool/ Fri, 09 Oct 2020 21:18:45 +0000 https://gonitrolink.com/?post_type=product&p=8724 Piston Ring Filer Tool

If you've been looking for a specialty tool that can perform two jobs equally as well then check out this brand new Piston Ring Filer Tool that can not only deliver a clean, precise end gap on your piston rings. But also help you with your valve stem clearance as well. It's equipped with a 120 grit silicone carbide wheel that holds its shape. And 2 small bumper stops to help secure your piston ring for nice accurate cut. It has provisions to mount to your work bench if you choose. Or small enough to store away nicely in your race trailer. Order one today... And the problem goes away!

The post Piston Ring Filer Tool appeared first on Nitrolink.

]]> Piston Ring Filer Tool

If you’ve been looking for a specialty tool that can perform two jobs equally as well then check out this brand new Piston Ring Filer Tool that can not only deliver a clean, precise end gap on your piston rings. But also help you with your valve stem clearance as well. It’s equipped with a 120 grit silicone carbide wheel that holds its shape. And 2 small bumper stops to help secure your piston ring for nice accurate cut. It has provisions to mount to your work bench if you choose. Or small enough to store away nicely in your race trailer. Order one today… And the problem goes away!

The post Piston Ring Filer Tool appeared first on Nitrolink.

]]> 8724 Valve Lapping Sticks https://gonitrolink.com/shop/specialty-pit-tools/valve-lapping-sticks/ Fri, 09 Oct 2020 21:15:48 +0000 https://gonitrolink.com/?post_type=product&p=8721 Valve Lapping Sticks

Or, if you prefer to keep everything old school, then "Nitrolink" is here to help with one of these brand new Valve Lapping Sticks to make sure you're ready for the next round! No rocket science here, just a good quality tool that's comfortable to use and correctly balanced for optimum efficiency. It measures 8 5/8" long and comes equipped with a small and large, (1 1/8" and 1 3/8") cup on each end. Specialty pit tools available 24/7 right here on our website!

The post Valve Lapping Sticks appeared first on Nitrolink.

]]> Valve Lapping Sticks

Or, if you prefer to keep everything old school, then “Nitrolink” is here to help with one of these brand new Valve Lapping Sticks to make sure you’re ready for the next round! No rocket science here, just a good quality tool that’s comfortable to use and correctly balanced for optimum efficiency. It measures 8 5/8″ long and comes equipped with a small and large, (1 1/8″ and 1 3/8″) cup on each end. Specialty pit tools available 24/7 right here on our website!

The post Valve Lapping Sticks appeared first on Nitrolink.

]]> 8721 Pneumatic Valve Spring Compressor Tool https://gonitrolink.com/shop/specialty-pit-tools/valve-spring-installer-tool/ Fri, 09 Oct 2020 21:10:50 +0000 https://gonitrolink.com/?post_type=product&p=8713 Pneumatic Valve Spring Compressor Tool

Having the right tools for the job has always been key not only at the race shop preparing for your next upcoming event, but also at the racetrack to keep your team efficient and going rounds! If your looking to cut down the time spent changing your valves or springs then this brand new Pneumatic Valve Spring Compressor Tool is exactly what you're looking for! This high quality specialty tool is durable, light weight and made of 6061 / 7075 T-6 aluminum. And is sure to offer the same quality service to your race team as it does with many of the pro nitro teams on tour! It's two stage air pump delivers up to 1,000 lbs. of force on as little as 70 psi. (DO NOT exceed 120 psi) and comes equipped with a 1.6" ID jaw adapter, however can also be ordered with a larger 1.740" ID jaw adapter (sold separately) if needed. The non-marring screw cap helps to protect against damage to your high end valves. And a 1-1/2" screw adjustment allows for a 7" to 8-1/2" throat. Add one of these to your race team today and be that much ahead of the competition tomorrow!

Choose the standard 1.6" ID jaw, or upgraded 1.740" ID size in the "options" menu below.

The post Pneumatic Valve Spring Compressor Tool appeared first on Nitrolink.

]]> Pneumatic Valve Spring Compressor Tool

Having the right tools for the job has always been key not only at the race shop preparing for your next upcoming event, but also at the racetrack to keep your team efficient and going rounds! If your looking to cut down the time spent changing your valves or springs then this brand new Pneumatic Valve Spring Compressor Tool is exactly what you’re looking for! This high quality specialty tool is durable, light weight and made of 6061 / 7075 T-6 aluminum. And is sure to offer the same quality service to your race team as it does with many of the pro nitro teams on tour! It’s two stage air pump delivers up to 1,000 lbs. of force on as little as 70 psi. (DO NOT exceed 120 psi) and comes equipped with a 1.6″ ID jaw adapter, however can also be ordered with a larger 1.740″ ID jaw adapter (sold separately) if needed. The non-marring screw cap helps to protect against damage to your high end valves. And a 1-1/2″ screw adjustment allows for a 7″ to 8-1/2″ throat. Add one of these to your race team today and be that much ahead of the competition tomorrow!

Choose the standard 1.6″ ID jaw, or upgraded 1.740″ ID size in the “options” menu below.

The post Pneumatic Valve Spring Compressor Tool appeared first on Nitrolink.

]]> 8713