New Product

Add to Wishlist

Manton Custom Pushrods

Individually handcrafted and inspected for ultimate performance!!! And when it comes to Supercharged, Turbo Charged, Nitrous, or Normally Aspirated Engines, Nitrolink offers Manton Custom Pushrods exclusively in a variety of different length, diameter, tip and cup sizes to meet your specific needs...

The extreme duty S-7 Tool Steel 3 piece style, is mainly used in Top Fuel, A Fuel, Blown Alcohol, Pro Mod, Nostalgia, Tractor Pulling, etc. And is the choice of champions for the majority of the pro nitro and alcohol teams on tour! They're specifically designed to work with extreme cylinder and spring pressures. And can be ordered in: 3/8″, 7/16″, 1/2″, or 9/16″ diameter in any length with a straight tube or tapered, with any variation of taper. And a variety of tips are available in 8620 or H-13.

The Series 5 style is also used in Top Fuel, Pro Stock, Pro Modified, Blown Alcohol, Tractor Pulling, Sprint Car, Offshore Marine, Cup and LS Series. They're made with 4130/4135 chromoly tubing that's heat treated. And can be ordered in: 5/16″, 11/32″, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, or 3/4″ diameter in any length with a straight tube or tapered, with any variation of taper. And a variety of tips available in 8620, H-13, or Copper Alloy Insert Cup. Shaft or pedestal style rocker arms should be used in conjunction with this series of pushrod because the tube is not case hardened for guide plate use...

The Strongest Pushrods available + Unmatched Customer Service = GoNitrolink.com

Please note: Custom made to your exact specifications. Please call: (916) 425-1427 anytime to order.

Drivers Only! , Misc. , Safety Equipment

Simpson 12′ Crossform “Pro” Chute – Black Pack

Price

$719.95

Quantity

- +

Total

$719.95

Information

Choose Options

Add to Wishlist

"Nitrolink" offers a complete line of all Simpson Race Products!

Simpson 12' Crossform "Pro" Chute - Black Pack

Check out this BRAND NEW Simpson 12' Crossform "Pro" Chute - Black Pack for your nitro, alcohol, or gas burning Dragster, Funny Car, Altered, Pro Mod, A/Fuel Car, Show Car, or ??? These are the Top Fuel / Nitro Funny Car 12' Crossform models with the light weight black nomex pack, for cars running 200-300+ MPH. They're equipped with the 3/4" size lanyard straps instead of the smaller nylon lines commonly used on the lighter duty chutes. Canopy colors come in red, blue, or black. And it comes complete with a pack, aluminum back-plate and pilot chute included for a complete package. Release cable not included. So here's the perfect opportunity to replace that old worn out Chute you're currently running on your race car. Or, grab one up for a spare!

All Chutes are sold Separately.

Choose either Red, Blue, or Black in the "options" menu below.

Clevite 3″ Main Bearings 426 Hemi MB-3564 VU (20) – Upper

Price

Call for Price

Quantity

- +

Total

Call for Price

Information

Add to Wishlist

Nitrolink is you're one stop shop for all Clevite Engine Bearings...

Clevite 3" Main Bearings 426 Hemi MB-3564 VU (20) - Upper

These Clevite 3" Main Bearings 426 Hemi MB-3564 VU (20) - Upper are sold in a pack of (20) and are the standard when it comes to offering a more affordable alternative without the coating. While still providing unmatched quality and performance Clevite Products are know for. They are built on an un-plated, hardened-steel backing for better dimensional accuracy and bore contact. And offer a low-to-medium eccentricity. Manufactured with a lead-indium surface alloy, which allows them to conform better for a precise fit. This style Bearing is by far the most popular with racers competing in a wide variety of classes everywhere!

Racers Discount pricing available! Call: (916) 425-1427 anytime to order.

Bearings available for Hemi, Chevy, or Ford.

Clevite 3″ Main Bearings 426 Hemi MB-3564 VL (20) – Lower

Price

Call for Price

Quantity

- +

Total

Call for Price

Information

Add to Wishlist

Nitrolink is you're one stop shop for all Clevite Engine Bearings...

Clevite 3" Main Bearings 426 Hemi MB-3564 VL (20) - Lower

These Clevite 3" Main Bearings 426 Hemi MB-3564 VL (20) - Lower are sold in a pack of (20) and are the standard when it comes to offering a more affordable alternative without the coating. While still providing unmatched quality and performance Clevite Products are know for. They are built on an un-plated, hardened-steel backing for better dimensional accuracy and bore contact. And offer a low-to-medium eccentricity. Manufactured with a lead-indium surface alloy, which allows them to conform better for a precise fit. This style Bearing is by far the most popular with racers competing in a wide variety of classes everywhere!

Racers Discount pricing available! Call: (916) 425-1427 anytime to order.

Bearings available for Hemi, Chevy, or Ford.

Jet Nuts #8 -32 Fine Thread - Pack of 10

Hardware

Jet Nuts – 1/2″-20 Fine Thread – Pack of 10

Price

$66.95

Quantity

- +

Total

$66.95

Information

Add to Wishlist

Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!

Jet Nuts - 1/2"-20 Fine Thread - Pack of 10

These Jet Nuts - 1/2"-20 Fine Thread - Pack of 10 - are coated steel to fit your 9/16" size wrench. This is one of the most popular sizes found on most race cars, so it's able to be used in a wide variety of applications. This style of self locking nut works better than a standard nylock nut under high heat / high vibration racing conditions. And offers a much lower profile than standard nuts allowing you to use a reduced size wrench in tight areas. Now you know exactly where to go for hard to find racing hardware! GoNitrolink.com

Hardware

Jet Nuts #8 -32 Fine Thread – Pack of 10

Price

$8.95

Quantity

- +

Total

$8.95

Information

Add to Wishlist

Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!

Jet Nuts #8 -32 Fine Thread - Pack of 10

These Jet Nuts #8 -32 Fine Thread - Pack of 10 are coated steel to fit your 13/64" size wrench. This is one of the most popular sizes found on most race cars, so it's able to be used in a wide variety of applications. This style of self locking nut works better than a standard nylock nut under high heat / high vibration racing conditions. And offers a much lower profile than standard nuts allowing you to use a reduced size wrench in tight areas. Now you know exactly where to go for hard to find racing hardware! GoNitrolink.com

Clevite CB-1512VCTU(30) Hemi Upper Rod Bearings – Coated

Price

Call for Price

Quantity

- +

Total

Call for Price

Information

Add to Wishlist

"Nitrolink" is you're one-stop shop for all Clevite Engine Bearings!

Clevite CB-1512VCTU(30) Hemi Upper Rod Bearings - Coated

These Clevite CB-1512VCTU(30) Hemi Upper Rod Bearings - Coated style are sold in a pack of (30) and offer that extra added protection when it's needed most. These are the exact style bearings being used by the majority of the Pro Nitro Top Fuel and Funny Car Teams on tour. They feature Clevites exclusive "TriArmor Coating" the industry's only moly/graphite treatment. A complex blend, in a low-friction polymer base, that offers protection and lubricity second to none. And makes it easier to get a more accurate read on engine performance in between rounds. Designed with enlarged chamfers at the sides for greater crank-fillet clearance. They're manufactured without flash plating for better seating. And can perform especially well on engines that run at medium-to-high revs. They have hardened-steel backings with thin overlays and a high crush factor, plus a medium level of eccentricity. It's easy to see why this style Bearing is the choice of champions!

Racers Discount pricing available! Call: (916) 425-1427 anytime to order.

Bearings available for Hemi, Chevy, or Ford.

Clevite CB-1512VCTL(30) Hemi Lower Rod Bearings – Coated

Price

Call for Price

Quantity

- +

Total

Call for Price

Information

Clutch/Transmission/Drive-train , Misc.

Add to Wishlist

"Nitrolink" is you're one-stop shop for all Clevite Engine Bearings!

Clevite CB-1512VCTL(30) Hemi Lower Rod Bearings - Coated

These Clevite CB-1512VCTL(30) Hemi Lower Rod Bearings - Coated style are sold in a pack of (30) and offer that extra added protection when it's needed most. These are the exact style bearings being used by the majority of the Pro Nitro Top Fuel and Funny Car Teams on tour. They feature Clevites exclusive "TriArmor Coating" the industry's only moly/graphite treatment. A complex blend, in a low-friction polymer base, that offers protection and lubricity second to none. And makes it easier to get a more accurate read on engine performance in between rounds. Designed with enlarged chamfers at the sides for greater crank-fillet clearance. They're manufactured without flash plating for better seating. And can perform especially well on engines that run at medium-to-high revs. They have hardened-steel backings with thin overlays and a high crush factor, plus a medium level of eccentricity. It's easy to see why this style Bearing is the choice of champions!

Racers Discount pricing available! Call: (916) 425-1427 anytime to order.

Bearings available for Hemi, Chevy, or Ford.

Rob Moore Reverser

Price

Call for Price

Quantity

- +

Total

Call for Price

Information

Add to Wishlist

"Nitrolink" offers a complete line of all Moore Performance Products!

Rob Moore Reverser

Quality craftsmanship, durability and performance!!! This state of the art brand new

Rob Moore Reverser is the lightest available on the market! And can be ordered to work with your Lenco or B&J transmission, with custom output shaft lengths also available. Check out the sleek looking finished billet aluminum case with it's low profile design that's anodized black. Order yours with a bellhousing style mount like this one, or with a cannon style mount. Each unit comes loaded with a 1 3/4", 40 spline steel output shaft for maximum strength under the highest extreme racing conditions that only 11,000 horsepower can produce. On the race track, this Reverser has delivered unmatched reliability for over 24 years. And is the exact component being used by most every "Big Show" top fuel and nitro funny car team out there! Along with the majority of the A/Fuel Dragsters and Alcohol Funny Cars, simply because it works! And it comes complete with a built-in air actuated neutral safety feature required for NHRA pro competition to complete this very special package. Order yours today! Or give us a call with any questions, as we're here to help anytime!

Price: $4079.00

Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.

In the Pits , Misc. , On the Starting Line... , Specialty Pit Tools

Portable Air Tank – 2 Gallon

Price

$157.99

Quantity

- +

Total

$157.99

Information

Add to Wishlist

Portable Air Tank - 2 Gallon

Providing all our valued customers with plenty of options brings us to this brand new aluminum Portable Air Tank - 2 Gallon size that's definitely one of the nicest on the market when it comes to quality! This one's the smaller style, with tank dimensions measuring approx 11" x 11" total. It offers up all the basics that include a 3 foot hose, tire ball chuck and standard fill valve to get the job done quickly and efficiently. It's compact size makes it easy to handle in the lanes for that last minute pressure adjustment right before a run. Plus, it stows away nicely in your race trailer during transport. Or, out of the way at your race shop when not in use. Maximum pressure is 125 psi. And includes everything you see in the photo... Quality pit equipment 24/7 right here! GoNitrolink.com

Larger 5 gallon size also available.

In the Pits , Misc. , On the Starting Line... , Specialty Pit Tools

Portable Air Tank – 5 Gallon

Price

$180.99

Quantity

- +

Total

$180.99

Information

Add to Wishlist

Portable Air Tank - 5 Gallon

It's Portable... It's Lightweight... And it's Polished for that awesome finished look! This brand new aluminum Portable Air Tank - 5 Gallon size checks all the boxes when you're looking for just the basics without compromising quality. This one's the larger style, with tank dimensions measuring approx 15" x 13" total. It's equipped with a 3 foot hose, tire ball chuck and standard fill valve to get the job done quick and easy. It's compact size makes it perfect for use in the lanes, ready to provide that last minute pressure adjustment. Or, it stows away nicely out of the way at your race shop or in your trailer. Maximum pressure is 125 psi. And includes everything you see in the photo... The coolest place on the planet for all your support equipment needs! GoNitrolink.com

Cylinder Heads , Engine , Misc.

Complete 426 Hemi Rocker Assembly

Price

$5,795.00

Quantity

- +

Total

$5,795.00

Information