Another BRAND NEW item... Without the brand new price!!!
392 Hemi Alcohol Dragster Headers
Quality racing components taken to the next level right here at GoNitrolink.com!
And if you're in the market for a brand new set of 392 Hemi Alcohol Dragster Headers for your Alcohol Dragster, Blown Alcohol Altered, Drag Boat, etc; then look no further... This set was made by Shorty's and in excellent shape with a pipe diameter measuring
2 1/2" total, with the standard degree bend. They're set up to work with your AJPE 392 billet fuel heads and equipped with EGT bungs on the top, ready to accept your Racepak or other brand EGT probes (sold separately). Or, just cap them off if you're not running a computer. And check out the lightened reinforcement tube gussets for extra added strength to complete this very nice package! Order this set right here... And have money left over by not having to buy new elsewhere!
PLEASE NOTE: These headers will not adapt to your application if your running 426 fuel heads or fatheads.
392 Hemi Oil Pan Gaskets
When you think hi performance gaskets and consumables... Think GoNitrolink.com! And if you happen to be running a Rodeck / Emery Block, then you know exactly how to put one of these brand new 392 Hemi Oil Pan Gaskets to work! These are made by SCE and consist of a steel core and teflon coating on one sides to help prevent oil saturation. They measure .078" thickness and are sold separately. We offer a large selection of all the popular hi performance racing gaskets including cylinder head, exhaust, oil pan, blower and injector gaskets to make sure we have you covered for the weekend!
426 Hemi Rear Main Seal Kit
If you're thinking about freshening up your primary engine in your race car, or spare engine in your race trailer then don't forget a 426 Hemi Rear Main Seal Kit to get the job done right! This set is exactly what's needed if your running a TFX, Brad, or Keith Black block. And it could prevent a whole lot of problems by your team not being shut off on the starting line because of an oil leak. A few clicks of your mouse and it's on the way!
426 Hemi Short Block Covers
So, if you're running an Alan Johnson, Brad, or Keith Black Block, then this next item should be right up your alley! Check out these 426 Hemi Short Block Covers that I'm sure every hemi racer out there can put to work immediately! Way to much time and money goes into tear-down, assembly, installation, etc; to even think about having dirt, metal shavings, hardware, or other foreign objects fall down inside your short block. These covers come in a 2 piece set and are made from .050 aluminum and powder coated black. They accept either 1/2" or 9/16" size head studs. And cover the whole top part of the short block as well as all cylinders. They clean up quickly, store away almost anywhere and can't wait to start protecting that spare short block in your race shop, trailer, or pit area!
IN STOCK & READY TO SHIP!!!
AJPE 426 Hemi Billet Block
The coolest place on the planet to buy all your top of the line racing components like this slightly used, late model AJPE 426 Hemi Billet Block is right here at GoNitrolink.com...
And this one's been freshened up and has not been run since... Line bore, cam journals and main caps were all gone over, so you know your money was well spent here! And it features a standard deck, standard mains, 48 degree raised cam. And loaded with 4.187 sleeves, has a 1 1/16" lifter bore size, a standard 54mm cam journal size and ready to accept you're 9/16" size head studs (not included). It's been professionally repaired (see photos) and has been machined down .015 off the deck surface, with all the sleeves having over-sized registers. Plus, the best news is this one won't cost you $10,000 bucks, plus the wait time to buy a new one elsewhere! This block is in stock, ready to ship... And definitely ready to go to work!!!
Priced to move at Only: $5595. + shipping.
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Tray in photos not included.
AJPE Billet 392 Hemi Heads
Serviced and ready to run!!! Is exactly what you'll find when this "complete" set of
AJPE Billet 392 Hemi Heads show up on your doorstep! This slightly used set is in great shape and free of any damage or repairs. And ready to work with your 6 bolt style intake manifold. They're loaded with a slightly used set of beadlock groove Manley 2.125" diameter titanium intakes that measure 5.350" long (5/16" stem). And a set of square groove Manley inconel 1.870" exhaust valves that measure 5.260" long (11/32" stem) with Manley titanium 10° locks & retainers. Plus, a slightly used set of PSI Triple Valve Springs are also included as well. The intake ports are o-ring equipped and the cylinder head surfaces are incredibly smooth and in great shape. Combustion chambers have o-rings installed and have never been blown out or burned thru with chambers having very little normal minimal wear. All valve seats and valve guides are in great shape. And we'll include a complete set of header & intake manifold studs to make this hard to find package even better! And as you probably know, your block must be equipped with head studs, not head bolts. And YOU CANNOT RUN WATER thru these heads.
Brand new, a loaded set identical to these will set you back right at $10,000 Bucks! But not here... Not today! This set is available immediately and ready to ship out today...
The Coolest Race Parts on the Planet + Unmatched Customer Service = GoNitrolink.com
Priced to move at: Only $3995.00
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Alan Johnson 392 Hemi Blower Manifold
Buy this one right here today... Without having to wait months for delivery!!! Check out this slightly used Alan Johnson 392 Hemi Blower Manifold for your nitro, alcohol, or gas burning Dragster, Funny Car, Altered, Drag Boat, or ? This one's the upgraded light weight magnesium 6 bolt style, that's in great shape and free of any damage or repairs. It measures right at 5 7/16" tall. With the Blower opening at the top measuring 4" wide by 13 5/8" long. It has provisions to run port nozzles if you choose. Otherwise, just plug them off. And it's also set up to run the standard, large size burst panel in the front (sold separately). This manifold is o-ring ready at the top and can work with most any 6-71 to 14-71 roots style superchargers. And could be used with any 392 Hemi 6 bolt style Cylinder Heads... Save more, Race more, Win more! GoNitrolink.com
Alan Johnson 426 Hemi Blower Manifold
Super clean and ready to install right out of the box! Check out this Alan Johnson 426 Hemi Blower Manifold for your nitro, alcohol, or gas burning Dragster, Funny Car, Altered, Drag Boat, or ? This manifold is the .100 tall, 6 bolt style that's slightly used, in great shape and made of light weight magnesium. It free of any damage or repairs and measures right at 6" tall. And has provisions to run port nozzles if you choose. Otherwise, just plug them off. Oil filler inlet location is in the back for easy access (cap not included). And this one's set up to run the standard, large size burst panel in the back (sold separately). However, it can be easily modified to run a burst panel in the front if you choose. The Blower opening at the top is o-ring ready and measures the standard 4 1/4" wide by 15 13/16" long. And this manifold can work with your SSI, Kobelco, Littlefield, PSI, Mooneyham, or Kuhl, 6-71 to 14-71 roots style superchargers. It can be used with your fuel heads made by BAE, or Dart, that are set up for a 6 bolt manifold. As well as any Alan Johnson Stage 5's, 6's, or 7 fuel heads.
PLEASE NOTE: This manifold WILL NOT work if you're running "fatheads" like the A/Fuel cars are running, (such as Brad Stage 3's, 4's, 5's, etc). A brand new manifold just like this one is going to set you back over $3400 Bucks!!! But don't even think about spending that much when you can pick up this super clean set-up right here for a fraction of the cost... Helping your team save big $$$'s is why we're here! GoNitrolink.com
Priced to move at: Only $2495. Or best offer.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Alan Johnson 426 Hemi Rocker Assembly
Probably one of the most popular hard to find Hemi items would be a top of the line complete Alan Johnson 426 Hemi Rocker Assembly. This hi-ratio set with Alan Johnson billet stands and upgraded Titanium Shafts is loaded with a BRAND NEW set of Stage 5 (1.75 ratio) Intake Rockers. And a slightly used set of Cluff (standard ratio) Exhaust Rockers. All Rockers are equipped with the larger size 7/16" adjusters with the 3/8 ball, which is pretty cool, because now you don't have to switch wrenches etc; to adjust both your Intake & Exhaust Rockers. All Stands, Shafts, Adjusters & Nuts are in great shape with no damage. And all shims & springs are brand new and included as well. This set-up works with your BAE, Dart, or Alan Johnson Fuel Heads that bolt up to your Keith Black, BAE, or TFX Rodeck cast or billet block. However, if you're running "fat heads" like what the A/Fuel cars are running, (such as Brad 4's, 5's 6's, etc:) these will not adapt to your application.
Brand new price to duplicate everything you see here is going to set you back over $9500 Bucks!!! But not here... Not today! This complete set-up is definitely some of the best equipment money can buy for strength, durability and performance. And ready to install right out of the box and go racing... Save more, Race more, Win more! GoNitrolink.com
Alan Johnson Stage 1 Nostalgia Cylinder Heads
Check out this "complete" set of Alan Johnson Stage 1 Nostalgia Cylinder Heads then you'll know one of the reasons why many of the top nostalgia nitro teams on tour are laying down those kind of numbers on race day! This set is the current style, popular because they utilize the smaller intake & exhaust runners making them perfect for use in Nostalgia Top Fuel, Nostalgia Nitro Funny Car, Blown Fuel Altered, Nostalgia A/Fuel, 7.0 Pro, Drag Boat, Tractor Puller and so on. This slightly used set is the single plug style, set up to run 4 spark plugs per head. Both are in excellent shape and work with your standard deck TFX Rodeck, BAE, or Keith Black cast or billet block, using your standard deck fuel head style manifold. The intake ports are o-ring equipped and the cylinder head surfaces are incredibly smooth and in great shape. Combustion chambers have o-rings installed and have never been blown out or burned thru with chambers having very little normal minimal wear. All valve seats and valve guides are in nice shape. And they're loaded with a slightly used set of Victory 2.375 titanium intake and Manley 1.925 exhaust valves, with Victory locks & retainers. And a set of Manley Dual Intake and PAC Triple Valve Springs are also included as well. Plus, we'll include a complete set of inner head studs, intake manifold studs, header studs and valve cover studs to make this deal that much better! Rocker stand dowel pins are the standard 3/8" size and the exhaust flange pattern is also standard and will accommodate most any brand of Hemi fuel head style header, however will not interchange with headers off of fatheads. And as you probably know, your block must be equipped with head studs, not head bolts. And YOU CANNOT RUN WATER thru these heads.
Please note: These AJ Fuel Heads are not the "Fatheads" like the A/Fuel Dragsters are running... So, if you've had a chance to shop around lately, then you know a brand new bare set identical to these will set you back almost $7000 Bucks! But don't even think about spending that much here... This set is complete, available immediately and ready to ship out today. The road to the winners circle may be shorter than you think! GoNitrolink.com
Priced to move at: Only $4500.00 set.
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Another BRAND NEW item... Without the brand new price!!!
Arias 392 Hemi Coated Nitro Pistons
Great News!!! Here's another brand new product, without the brand new price tag! This set of (10) brand new Arias 392 Hemi Coated Nitro Pistons are the 4.125 bore size and ready to accept your 1.094" pin size, with a 1.600 compression height. Ring groove sizes are as follows:
Top = .0745", Second = .0641", Oil ring = .1880" size. We have several sets available, so click on "buy now" and get ready to save hundreds right here... Quality Racing Components + Unmatched Customer Service = GoNitrolink.com
Other Compression Heights Available. Call: (916) 425-1427 for details.
Price
$49.99 – $62.99Price range: $49.99 through $62.99
Total
$49.99 – $62.99Price range: $49.99 through $62.99
BAE / Keith Black Oil Pan Gaskets
GoNitrolink.com for all your hi performance gaskets and consumables! And if you're weapon of choice happens to be a BAE, or Keith Black block, then you know exactly how to put one of these brand new BAE / Keith Black Oil Pan Gaskets to work! These are made by Mahle and consist of a composite material, with a steel core and teflon coating to help prevent oil saturation. They're NHRA nitro legal, measure .087" thickness and are sold separately. We offer a large selection of all the popular hi performance racing gaskets including cylinder head, exhaust, oil pan, blower and injector gaskets to make sure we have you covered for the weekend!
Choose with cut-out's or no cut-out's in the "options" menu below.
