Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
TFX '92 Complete 426 Hemi Gear Drive
Take a look at this slightly used TFX '92 Complete 426 Hemi Gear Drive that works with your TFX '92 blocks only... It's the 48° raised cam style, is in nice shape and includes the front cover, upgraded titanium crank hub, crank seal & housing, cam gear, cam hub, idler gear kit, crank gear, degree wheel, crank bolt and hardware. This set-up could work well on your Top Fuel or Nostalgia Dragster, Nitro or Alcohol Funny Car, AA/Fuel Altered, Pro Mod, Drag Boat, Tractor Puller and so on... The billet aluminum front cover is in nice shape with only minor nicks and scratches from normal minimal use. And works in conjunction with your BAE or AFT fuel pump extension (sold separately). The steel cam gear is the 11 hole style, also in nice shape and free of any damage with all teeth looking good to go. The crank gear included is dual keyed and the idler gear also gets the thumbs up. The cam hub is equipped with a 1/2" size hex and the RCD dual keyed crank hub and degree wheel are ready to install using the standard size crank bolt that's also included. This set-up can be used on both supercharged or un-blown applications. However, it will not adapt to your application if you're running a BAE or Keith Black block.
Why Buy New??? Expect to pay close to $1,800 Bucks for all these components buying new elsewhere. But don't even think about spending that much when you can pick this one up right here for a fraction of the cost... And have hundreds of dollars left over for other weekend expenses! This unit is available immediately and ready to ship out today...
Quality pre-owned & new racing components 24/7 right here! GoNitrolink.com
MSD Pro Mag 44 Points Box & Coil Kit
Top of the line quality components, at a money saving price is exactly what you'll find right here with this slightly used MSD Pro Mag 44 Points Box & Coil Kit that's sure to help you save both time and money ordering everything all in one place! This kit features a standard MSD #81453 Points Box that's the non-rev style, that connects quickly to your MSD Pro Mag 44 Magneto using a 4 pin Deutsch connector that's already installed. It's black in color, so it matches the MSD #81423 Pro Mag 44 Coil that's also included, for that awesome stealth look! Plus, all the mounting hardware, anti-vibration mounts, etc; are already installed on the funny car style aluminum mounting plate that's also included with the complete package. All components will be tested prior to shipping, so you know your money was well spent here. And get ready to save over $1,400 Buck not having to buy new elsewhere!
Racers helping Racers do what they do best... For Less! GoNitrolink.com
Slightly Used
Jesel 426 Hemi Roller Lifters
Been looking for a nice slightly used set of top of the line Jesel 426 Hemi Roller Lifters without having to spend $3,700 Bucks for a new set? Well then you're definitely looking in the right place here!!! This complete set of (8) pair is the larger 1 1/16" lifter bore size. And can work with your TFX, BAE, or Keith Black, cast or billet block. They're equipped with a .37" diameter pin, with the rollers measuring .56" wide. And a 2" spread. All rollers are in nice used condition, with lifter outside surfaces showing normal minimal wear. So if you need a set, here they are... If you have a set, then don't hit the road without spares...
Hi-Performance Products for Less, is what we do Best! GoNitrolink.com
IN STOCK & READY TO SHIP!!!
AJPE 426 Hemi Billet Block
The coolest place on the planet to buy all your top of the line racing components like this slightly used, late model AJPE 426 Hemi Billet Block is right here at GoNitrolink.com...
And this one's been freshened up and has not been run since... Line bore, cam journals and main caps were all gone over, so you know your money was well spent here! And it features a standard deck, standard mains, 48 degree raised cam. And loaded with 4.187 sleeves, has a 1 1/16" lifter bore size, a standard 54mm cam journal size and ready to accept you're 9/16" size head studs (not included). It's been professionally repaired (see photos) and has been machined down .015 off the deck surface, with all the sleeves having over-sized registers. Plus, the best news is this one won't cost you $10,000 bucks, plus the wait time to buy a new one elsewhere! This block is in stock, ready to ship... And definitely ready to go to work!!!
Priced to move at Only: $5595. + shipping.
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Tray in photos not included.
AJPE Billet 392 Hemi Heads
Serviced and ready to run!!! Is exactly what you'll find when this "complete" set of
AJPE Billet 392 Hemi Heads show up on your doorstep! This slightly used set is in great shape and free of any damage or repairs. And ready to work with your 6 bolt style intake manifold. They're loaded with a slightly used set of beadlock groove Manley 2.125" diameter titanium intakes that measure 5.350" long (5/16" stem). And a set of square groove Manley inconel 1.870" exhaust valves that measure 5.260" long (11/32" stem) with Manley titanium 10° locks & retainers. Plus, a slightly used set of PSI Triple Valve Springs are also included as well. The intake ports are o-ring equipped and the cylinder head surfaces are incredibly smooth and in great shape. Combustion chambers have o-rings installed and have never been blown out or burned thru with chambers having very little normal minimal wear. All valve seats and valve guides are in great shape. And we'll include a complete set of header & intake manifold studs to make this hard to find package even better! And as you probably know, your block must be equipped with head studs, not head bolts. And YOU CANNOT RUN WATER thru these heads.
Brand new, a loaded set identical to these will set you back right at $10,000 Bucks! But not here... Not today! This set is available immediately and ready to ship out today...
The Coolest Race Parts on the Planet + Unmatched Customer Service = GoNitrolink.com
Priced to move at: Only $3995.00
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
BAE 426 Hemi Fuel Heads
Check out this "complete" set of BAE 426 Hemi Fuel Heads ready for the next Funny Car Chaos event, or your Nostalgia Top Fuel Dragster, Nostalgia Nitro Funny Car, Blown Fuel Altered, Nostalgia A/Fuel, 7.0 Pro, Drag Boat, Tractor Puller and so on. This slightly used set is in great shape and free of any damage or repairs. And works with your standard deck Keith Black, BAE, or TFX Rodeck cast or billet block, using your .100 tall fuel head style manifold. They're the 6 bolt, .100 tall style, loaded with a slightly used set of beadlock groove Manley 2.450 titanium intakes (11/16" stem). And Manley inconel 1.925 exhaust valves (3/8" stem) with Victory titanium retainers and the Manley lash lock system. Plus, a slightly used set of PAC Triple Valve Springs are also included as well. And we'll throw in a complete set of inner head studs, header studs and rocker stand studs to make this deal that much better! Rocker stand dowel pins are the standard 3/8" size and the exhaust flange pattern is also standard and will accommodate most any brand of Hemi fuel head style header, however will not interchange with headers off of fatheads. And as you probably know, your block must be equipped with head studs, not head bolts. And YOU CANNOT RUN WATER thru these heads. The intake ports are o-ring equipped and the cylinder head surfaces are incredibly smooth and in great shape. Combustion chambers have o-rings installed and have never been blown out or burned thru with chambers having very little normal minimal wear. All valve seats and valve guides are in great shape. And this set has provisions to run down nozzles if you choose. They're set up for dual (16 total) spark plugs. However, if your car is set up for 1 plug per cylinder (8 total) no problem... Just plug off 1 hole per cylinder and use your single plug valve covers. Please note: These BAE Fuel Heads are not the "Fatheads" like the A/Fuel Dragsters are running.
Brand new, a loaded set identical to these will set you back right at $10,000 Bucks! But not here... Not today! This set is available immediately and ready to ship out today...
The road to the winners circle may be shorter than you think! GoNitrolink.com
Priced to move at: Only $3895.00
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Another BRAND NEW item... Without the brand new price!!!
392 Hemi Alcohol Dragster Headers
Quality racing components taken to the next level right here at GoNitrolink.com!
And if you're in the market for a brand new set of 392 Hemi Alcohol Dragster Headers for your Alcohol Dragster, Blown Alcohol Altered, Drag Boat, etc; then look no further... This set was made by Shorty's and in excellent shape with a pipe diameter measuring
2 1/2" total, with the standard degree bend. They're set up to work with your AJPE 392 billet fuel heads and equipped with EGT bungs on the top, ready to accept your Racepak or other brand EGT probes (sold separately). Or, just cap them off if you're not running a computer. And check out the lightened reinforcement tube gussets for extra added strength to complete this very nice package! Order this set right here... And have money left over by not having to buy new elsewhere!
PLEASE NOTE: These headers will not adapt to your application if your running 426 fuel heads or fatheads.
Another BRAND NEW item... Without the brand new price!!!
Arias 392 Hemi Coated Nitro Pistons
Great News!!! Here's another brand new product, without the brand new price tag! This set of (10) brand new Arias 392 Hemi Coated Nitro Pistons are the 4.125 bore size and ready to accept your 1.094" pin size, with a 1.600 compression height. Ring groove sizes are as follows:
Top = .0745", Second = .0641", Oil ring = .1880" size. We have several sets available, so click on "buy now" and get ready to save hundreds right here... Quality Racing Components + Unmatched Customer Service = GoNitrolink.com
Other Compression Heights Available. Call: (916) 425-1427 for details.
392 Hemi Oil Pan Gaskets
When you think hi performance gaskets and consumables... Think GoNitrolink.com! And if you happen to be running a Rodeck / Emery Block, then you know exactly how to put one of these brand new 392 Hemi Oil Pan Gaskets to work! These are made by SCE and consist of a steel core and teflon coating on one sides to help prevent oil saturation. They measure .078" thickness and are sold separately. We offer a large selection of all the popular hi performance racing gaskets including cylinder head, exhaust, oil pan, blower and injector gaskets to make sure we have you covered for the weekend!
Blower Base Gaskets
Let GoNitrolink.com save you both time and money on all your consumables as well... And we'll keep offering products like these Blower Base Gaskets to help keep your race team budget in check! These are the upgraded nitrile style for better performance and longevity. And the standard size that could work with most any 6-71 to 14-71 roots style supercharger. They feature a .032" thickness, with a 4" x 12 1/4" center opening without the center tab. And they work with your standard 7/16" size blower studs. This is one of those items that definitely needs to be put in the race trailer before the race weekend... Remember, don't forget your spares!
Sold separately.
Used System 1 Dry Sump 426 Hemi Oil Pump
One critical component needed to get your race team to the winners circle is to have good oil pressure! So check out this slightly Used System 1 Dry Sump 426 Hemi Oil Pump that's similar to what many of the pro nitro teams on tour are running simply because of their outstanding flow characteristics, versatility and dependability. This one's in great condition inside and set up with a 1.8 and 2.1 gear size that could work well on your Nostalgia Nitro Funny Car, Alcohol Funny Car, Pro Mod, etc. It features you're standard 5/16" size drive and equipped with an AN -4 fitting for functions such as oil pressure gauge, Racepak or other on-board computer sensor, or rear oiling. Plus, two AN -12 IN/OUT fittings for the filter and a stainless hard loop line are included as well...
Personalized Customer Service second to none! GoNitrolink.com
Dechellis 426 Hemi Rocker Assembly
So if you're running a Top Fuel or Nostalgia Dragster, Nitro or Alcohol Funny Car, AA/Fuel Altered, Doorslammer, Drag Boat, or Tractor Puller on Nitro, Alcohol, or Gas. And are in the market for an awesome set-up loaded with the works, then check out this slightly used Dechellis 426 Hemi Rocker Assembly. This hi-ratio set is loaded with RS2 billet stands and upgraded Titanium Shafts. And features Stage 5 (1.7) standard Intake Rockers. As well as a set of Stage 5 Exhaust Rockers. All Rockers are equipped with the larger 7/16" adjusters with the larger 3/8 ball, which is pretty cool, because now you don't have to switch wrenches etc; to adjust both your Intake & Exhaust Rockers. Everything's in nice shape with your common nicks and scratches from normal minimal wear. Outside surface, rocker tips, threads and so on are free of any damage or repairs. All adjusters, nuts, shims & springs are included and this set-up works with your BAE, Dart, or Alan Johnson Fuel Heads that bolt up to your Keith Black, BAE, or TFX Rodeck cast or billet block. However, if you're running "fat heads" like what the A/Fuel cars are running, (such as Brad 4's, 5's 6's, etc.) these will not adapt to your application. This set-up is complete, in stock and ready to bolt on and go racing!!! GoNitrolink.com
