Blower Stud Kits
The new racing season is in full swing! Making this the perfect opportunity to get a jump on this money saving offer... We have a limited supply of BRAND NEW Blower Stud Kits that are ready to ship out immediately. And check out the craftsmanship on this set... Awesome! Mandatory in both NHRA & IHRA competition, this set of (8) total could work with any roots style supercharger. And can be used on either regular or set-back style manifolds. They're machined from high quality aluminum, anodized black and equipped with a hex top for easy installation or removal. They measure 2.585" over all length, with a 7/16" size, #20 thread on top. And a 1/2" size, #13 thread going into the Manifold. Nuts sold separately. Supplies are limited so, if you need a set... Here they are! If you have a set... Then here's your spares!!!
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Hemi Oil Pan Nuts
If you're running a AJ, Brad, or Keith Black block and are looking for a great deal on a complete set of brand new Hemi Oil Pan Nuts then look no further! These sets are made of durable steel, zinc coated and can be ordered in either the 5/16" -24 fine thread size, or the 5/16" -18 coarse thread size. And both come with a serrated flange for a secure fit. This popular item comes in a package of (24) total, so it's enough to work on either BAE or TFX blocks with any brand of 426 hemi oil pan on the market. And should be replaced with a fresh set every so often for optimum performance. Now you know exactly where to go for all your specialty hardware!
Choose either fine thread, or coarse thread in the "options" menu below.
Hemi Rocker Adjusters
Here's another one of those small items that we don't want to see keep you out of the winners circle because you didn't have spares... So, let's keep that from happening with these brand new Hemi Rocker Adjusters that are available in either the pressure feed oiler (with side holes), non-oiler (with hole), or standard solid style, in your choice of either 3/8" -24, with a 5/16" ball size or 7/16" -20, with a 3/8" ball size. All are precision machined and ready to work with your Stage 5, BAE, Manton, Reid, Arrow, Cluff, etc; rocker arms. And if you're also looking for the correct nuts that fit perfectly on these adjusters, just scroll down this page and your there! Quality racing components and customer service taken to the next level! GoNitrolink.com
Please note: Custom sizes also available. Please call: (916) 425-1427 to order.
Choose size & either 4 total, or 8 total in the "options" menu below.
itrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Hemi Valve Cover Nuts - Fat Heads
If you're running a set of fat heads on your race car, then here's a perfect opportunity to order a complete set of brand new Hemi Valve Cover Nuts - Fat Heads at a great price! This set of (14) total is made of durable steel, zinc coated and the 1/4" -28 fine thread size to work with your fat heads, with your choice of either a serrated or non-serrated flange. Add a set of 1/4" fine thread valve cover studs to your cart and you're all set for race day!
Choose either serrated, or non-serrated flange in the "options" menu below.
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Hemi Valve Cover Nuts - Fuel Heads
If you're running a set of fuel heads on your race car, then here's the perfect opportunity to order a complete set of brand new Hemi Valve Cover Nuts - Fuel Heads at a great price! This set of (20) total is made of durable steel, zinc coated, with your choice of either a serrated or non-serrated flange. And available in either the 1/4" -28 fine thread, or the 5/16" -24 fine thread size to work with your fuel heads. Add a set of either size valve cover studs to your cart so you're all set for race day!
Choose size needed and serrated, or non-serrated flange in the "options" menu below.
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Jet Nuts - 1/4"-28 Fine Thread - Pack of 10
These Jet Nuts - 1/4"-28 Fine Thread - Pack of 10 - are coated steel to fit your 5/16" size wrench. This is one of the most popular sizes found on most race cars, so it's able to be used in a wide variety of applications. This style of self locking nut works better than a standard nylock nut under high heat / high vibration racing conditions. And offers a much lower profile than standard nuts allowing you to use a reduced size wrench in tight areas. Now you know exactly where to go for hard to find racing hardware! GoNitrolink.com
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Jet Nuts - 3/8"-24 Fine Thread - Pack of 10
These Jet Nuts - 3/8"-24 Fine Thread - Pack of 10 - are coated steel to fit your 7/16" size wrench. This is one of the most popular sizes found on most race cars, so it's able to be used in a wide variety of applications. This style of self locking nut works better than a standard nylock nut under high heat / high vibration racing conditions. And offers a much lower profile than standard nuts allowing you to use a reduced size wrench in tight areas. Now you know exactly where to go for hard to find racing hardware! GoNitrolink.com
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Jet Nuts - 5/16"-24 Fine Thread - Pack of 10
These Jet Nuts - 5/16"-24 Fine Thread - Pack of 10 - are coated steel to fit your 3/8" size wrench. This is one of the most popular sizes found on most race cars, so it's able to be used in a wide variety of applications. This style of self locking nut works better than a standard nylock nut under high heat / high vibration racing conditions. And offers a much lower profile than standard nuts allowing you to use a reduced size wrench in tight areas. Now you know exactly where to go for hard to find racing hardware! GoNitrolink.com
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Jet Nuts - 7/16"-20 Fine Thread - Pack of 10
These Jet Nuts - 7/16"-20 Fine Thread - Pack of 10 - are coated steel to fit your 1/2" size wrench. This is one of the most popular sizes found on most race cars, so it's able to be used in a wide variety of applications. This style of self locking nut works better than a standard nylock nut under high heat / high vibration racing conditions. And offers a much lower profile than standard nuts allowing you to use a reduced size wrench in tight areas. Now you know exactly where to go for hard to find racing hardware! GoNitrolink.com
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Jet Nuts #10 -32 Fine Thread - Pack of 10
These Jet Nuts #10 -32 Fine Thread - Pack of 10 are coated steel to fit your 1/4" size wrench. This is one of the most popular sizes found on most race cars, so it's able to be used in a wide variety of applications. This style of self locking nut works better than a standard nylock nut under high heat / high vibration racing conditions. And offers a much lower profile than standard nuts allowing you to use a reduced size wrench in tight areas. Now you know exactly where to go for hard to find racing hardware! GoNitrolink.com
Rocker Adjuster Nuts
...And if we offer the adjusters here on GoNitrolink.com then we better offer these brand new Rocker Adjuster Nuts to go with them, right! This popular item comes in your choice of either 3/8" or 7/16" size and works in conjunction with your rocker adjusters on your Stage 5, BAE, Manton, Reid, Arrow, Cluff, etc; rocker arms. They're top quality precision machined, made in the U.S. and ready to help keep your rocker arms properly adjusted so you can put down a number!
Choose either 4 total, or 8 total in the "options" menu below.
Stainless T-Bolt Hose Clamps
So, now you're finally dialed in with the correct breather/catch can hose... Now we need to get you set up with the correct hose clamps to go with it! Check out these brand new Stainless T-Bolt Hose Clamps that are the perfect match for the silicone hose we also offer right here on our website. These 100% stainless steel hi performance clamps are resistant to corrosion, rust or fuel. And available in either 1 1/4" or 1 1/2" hose sizes. They offer both strength and durability to help keep your silicone hose right where it’s supposed to be... The right products to get the job done right the first time!!! GoNitrolink.com
Other sizes are also available. Call: (916) 425-1427 anytime!
Choose clamp size needed in the "options" menu below.