Hemi Rocker Adjusters
Here's another one of those small items that we don't want to see keep you out of the winners circle because you didn't have spares... So, let's keep that from happening with these brand new Hemi Rocker Adjusters that are available in either the pressure feed oiler (with side holes), non-oiler (with hole), or standard solid style, in your choice of either 3/8" -24, with a 5/16" ball size or 7/16" -20, with a 3/8" ball size. All are precision machined and ready to work with your Stage 5, BAE, Manton, Reid, Arrow, Cluff, etc; rocker arms. And if you're also looking for the correct nuts that fit perfectly on these adjusters, just scroll down this page and your there! Quality racing components and customer service taken to the next level! GoNitrolink.com
Please note: Custom sizes also available. Please call: (916) 425-1427 to order.
Choose size & either 4 total, or 8 total in the "options" menu below.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Used Inner Head Studs
If your in the market for a set of slightly Used Inner Head Studs to make racing a little more budget friendly this month then check out this complete set of (8) total, that are the H-11 style that measure 4.310" length to work with your fuel heads. They're equipped with a 7/16" course thread on the cylinder head side and work with your 7/16" fine nuts. Showtime is almost here, so order your set today!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Used Head Stud Nuts
How about a complete set of slightly Used Head Stud Nuts to help you stay within your racing budget this month for a change... This set of (26) total, are the 12 pt. style nuts that work with your 11/16" size socket. And fit your smaller 1/2" fine thread size head studs. Add a can of peanut butter compound to your cart and you're all set for race day!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Used Blower Front Cover Bolts
Lets offer a complete set with spares left over of these slightly Used Blower Front Cover Bolts to help keep everything sealed up and performing at its best! This set of (20) total, are the 12 pt. fine thread style bolts that measure 2" long and work with your 5/16" size socket. Save GoNitrolink.com to your favorites for all your specialty hardware needs!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Used Head Stud Nuts
How about a complete set of slightly Used Head Stud Nuts to help you stay within your racing budget this month for a change! This set of (26) total, are the 12 pt. style nuts that work with your 11/16" size socket. And fit your 9/16" fine thread size head studs. Add a can of peanut butter compound to your cart and you're all set for race day!
Blower Stud Kits
The new racing season is in full swing! Making this the perfect opportunity to get a jump on this money saving offer... We have a limited supply of BRAND NEW Blower Stud Kits that are ready to ship out immediately. And check out the craftsmanship on this set... Awesome! Mandatory in both NHRA & IHRA competition, this set of (8) total could work with any roots style supercharger. And can be used on either regular or set-back style manifolds. They're machined from high quality aluminum, anodized black and equipped with a hex top for easy installation or removal. They measure 2.585" over all length, with a 7/16" size, #20 thread on top. And a 1/2" size, #13 thread going into the Manifold. Nuts sold separately. Supplies are limited so, if you need a set... Here they are! If you have a set... Then here's your spares!!!
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Jet Nuts - 7/16"-20 Fine Thread - Pack of 10
These Jet Nuts - 7/16"-20 Fine Thread - Pack of 10 - are coated steel to fit your 1/2" size wrench. This is one of the most popular sizes found on most race cars, so it's able to be used in a wide variety of applications. This style of self locking nut works better than a standard nylock nut under high heat / high vibration racing conditions. And offers a much lower profile than standard nuts allowing you to use a reduced size wrench in tight areas. Now you know exactly where to go for hard to find racing hardware! GoNitrolink.com
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD Crank Bolt - Short
This next item is sure to save you both time and money not having to buy new elsewhere! So lets offer this slightly Used RCD Crank Bolt - Short style that measures 1 1/4" long from the flange and has a 3/4" thread diameter. This one's in nice shape and works with your 1" size wrench. And is responsible for attaching your crank hub to your crankshaft. At this price, you can't afford not to carry a spare... Order one today!
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Titanium NAS Screws -1/4"-28 Fine Thread - Pack of 10
These Titanium NAS Screws -1/4"-28 Fine Thread - Pack of 10 - are 11/16" long, partially threaded, countersunk, with a phillips head. And can be used in a wide variety of racing applications. They offer a lighter weight alternative compared to standard steel hardware for the weight conscience racer. Now you know exactly where to go for hard to find racing hardware! GoNitrolink.com
Rocker Adjuster Nuts
...And if we offer the adjusters here on GoNitrolink.com then we better offer these brand new Rocker Adjuster Nuts to go with them, right! This popular item comes in your choice of either 3/8" or 7/16" size and works in conjunction with your rocker adjusters on your Stage 5, BAE, Manton, Reid, Arrow, Cluff, etc; rocker arms. They're top quality precision machined, made in the U.S. and ready to help keep your rocker arms properly adjusted so you can put down a number!
Choose either 4 total, or 8 total in the "options" menu below.
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Jet Nuts - 5/16"-24 Fine Thread - Pack of 10
These Jet Nuts - 5/16"-24 Fine Thread - Pack of 10 - are coated steel to fit your 3/8" size wrench. This is one of the most popular sizes found on most race cars, so it's able to be used in a wide variety of applications. This style of self locking nut works better than a standard nylock nut under high heat / high vibration racing conditions. And offers a much lower profile than standard nuts allowing you to use a reduced size wrench in tight areas. Now you know exactly where to go for hard to find racing hardware! GoNitrolink.com
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Jet Nuts - 3/8"-24 Fine Thread - Pack of 10
These Jet Nuts - 3/8"-24 Fine Thread - Pack of 10 - are coated steel to fit your 7/16" size wrench. This is one of the most popular sizes found on most race cars, so it's able to be used in a wide variety of applications. This style of self locking nut works better than a standard nylock nut under high heat / high vibration racing conditions. And offers a much lower profile than standard nuts allowing you to use a reduced size wrench in tight areas. Now you know exactly where to go for hard to find racing hardware! GoNitrolink.com