Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Boninfante Titanium Clutch
How about a clutch program that's sure to help all Racers on a tight budget tow up to the lanes that much quicker! And if your looking to potentially save thousands of $$$'s at the same time... Then we might just have the solution right here!!! This Boninfante Titanium Clutch could work on your nitro burning front or rear engine Dragster, Funny Car, Altered, or ? It's slightly used and in great shape and is the 10.5" size, equipped with the lighter weight titanium pressure plate, flywheel and donut. It's set up to run 5 disks (not included) and is the 9 stand model with upgraded 5/8" studs, with all adjusters included made of titanium. And loaded with 15 levers, with the option to add 3 more.
Why buy new???
So, if you've had a chance to shop around for a new Glide Clutch. Then be prepared to spend right at $15,000 bucks or more for a set-up like this one! But don't even think about doing that if you're looking to save BIG time! This one will sell for thousands less than the cost of new so don't delay, order today!
Priced to move at: Only $3295.00 OBO.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Crower Pedal Clutch
We all know the importance of having a good clutch program in place and how setting your race car up with the correct components right from the start can save you countless hours in the pits, multiple runs on the track and a whole lot of frustration. And if your looking to potentially save thousands of $$$'s at the same time... Then we might just have the solution right here!!! This Crower Pedal Clutch could work on your nitro, alcohol, or gas burning front or rear engine Dragster, Funny Car, Altered, or Nostalgia A/Fuel Car. It's slightly used and in great shape. And in fact, has only 1 burnout on it since it was inspected. This one's the 10.7 size, equipped with the lighter weight aluminum pressure plate, flywheel and upgraded titanium donut. It's set up to run 3 disks (not included) and is the 6 stand model with the popular big stands and titanium adjusters. This set-up was recently certed, and is ready for showtime!!!
Why buy new???
So, if you've had a chance to shop around for a new Pedal Clutch... Then be prepared to spend right at $5,000 bucks or more for a set-up like this one! But don't even think about doing that if you're looking to save BIG time! This one will sell for half the cost of new, making this the perfect opportunity to save thousands!!!
Available immediately and priced to move.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Crower Pedal Clutch
How about a clutch program that's sure to help all Racers on a tight budget tow up to the lanes that much quicker! And if your looking to potentially save thousands of $$$'s at the same time... Then we might just have the solution right here!!! This Crower Pedal Clutch could work on your nitro, alcohol, or gas burning front or rear engine Dragster, Altered, or Nostalgia A/Fuel Car. It's slightly used and in great shape and has not been run since it's last inspection. This one's the 10" size, equipped with the lighter weight aluminum pressure plate, flywheel and donut. It's set up to run 2 disks (not included) and is the 6 stand model with 1/2" studs, with all adjusters included made of titanium.
Why buy new???
So, if you've had a chance to shop around for a new Pedal Clutch. Then be prepared to spend right at $3,500 bucks or more for a set-up like this one! But don't even think about doing that if you're looking to save BIG time! This one will sell for way less than the cost of new so don't delay, order today!
Priced to move at: Only $1695.00
We offer a complete line of all Pit Pal products!
Lenco Repair Tray
Nitrolink is excited to offer your race team top quality Pit Pal race trailer accessories for the exact same price as the manufacturer! So, let's get you set up with a brand new Lenco Repair Tray just like the one Lenco uses at their shop! This one's quality crafted from durable heavy aluminum and ready to provide your team years of service. It holds 8+ quarts of fluid and equipped with a handy side tray for bolts and small parts to assure you don't lose anything during service. The pump housing fits in the center hole to allow the transmission to stand on end for easier servicing. And the ATF reservoir keeps your work area clean and neat, with an easy to empty drain plug to make fluid disposal mess free. It measures 18.25"W x 3.25"H x 14.25"D with a 4" Diameter Holder. Use it once, then wonder how you ever got along without one... Shop here 24/7 for all your Pit Pal needs! GoNitrolink.com
Another BRAND NEW item... Without the brand new price!!!
Moore Performance Drive Shaft Coupler
Here at "Nitrolink" we're all about customer service and getting you to the racetrack for less money! So, here's another brand new item, without the brand new price! This
Moore Performance Drive Shaft Coupler is fresh and ready to install right out of the box. It measures 3.5" OAL. And equipped with 1 3/4" 40, fine splines inside and 2 3/4" 20, course splines outside. Save money, save time, save aggravation... Order here and it's done!
"Nitrolink" offers a complete line of all Moore Performance Products!
Moore Performance Reverser
Quality craftsmanship, durability and performance!!! This state of the art brand new
Moore Performance Reverser checks all the boxes in these 3 categories... And here's the proof! This is the exact component being used by most every "Big Show" top fuel and nitro funny car team out there! Along with the majority of the A/Fuel Dragsters and Alcohol Funny Cars, simply because it works! Lets start with the sleek looking, finished billet aluminum case. This low profile design is anodized black and the lightest available on the market. And can be ordered with a bellhousing style, or cannon style mount. Each unit comes loaded with a 1 3/4", 40 spline steel output shaft for maximum strength under the highest extreme racing conditions that only 11,000 horsepower can produce. On the race track, this Reverser has delivered unmatched reliability for over 24 years. And comes complete with a built-in air actuated neutral safety feature required for NHRA pro competition to complete this very special package. Order yours today! Or give us a call with any questions, as we're here to help anytime!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Another BRAND NEW item... Without the brand new price!!!
New U.S. Gear Ring & Pinion Set
"Supercharged Savings" right here at GoNitrolink.com with this New U.S. Gear Ring & Pinion Set. And if you're looking for a Pro Gear with a 4.11 ratio, then get ready to save some hard earned cash! This one works with your 9.5" size ford style rear ends and is brand new and ready to install. The big pinion shaft is the 35 spline 1 1/2" size, with a dual drilled ring gear that works with either your 1/2" or 7/16" size bolts. And check out the racer friendly price tag on this new product... Click on "buy now" before it's gone!
Pro Gear Ring & Pinion Set
"Supercharged Savings" right here at GoNitrolink.com And if you're looking for a really nice Pro Gear Ring & Pinion Set with a 3.89 ratio, then get ready to save some hard earned cash! This one works with your 9" size ford style rear ends and is ready to install right out of the box. The big pinion shaft is the 35 spline 1 1/2" size, with a dual drilled ring gear that works with either your 1/2" or 7/16" size bolts. This exact set up sells for right at $800 bucks new! However, check out the racer friendly price tag on this one... There's only 1 available, so click on "buy now" before it's gone for good!
Another BRAND NEW item... Without the brand new price!!!
Strange Pinion Coupler
Another new product without the new price tag!!! How about we set you up with this Strange Pinion Coupler to help keep a few extra bucks in your pocket! This one's made of hardened steel and measures 2.900 overall length and equipped with 2" 40, fine splines inside and 2 3/4" 20, course splines outside. Only 1 available at this price so come and get it!
"Nitrolink" offers a complete line of all Taylor Motorsports Products!
Taylor Reverser Blanket
If you're race car's equipped with a Moore Performance Reverser, then let's set you up with the exact component needed to help your team roll through tech that much quicker! This brand new Taylor Reverser Blanket was specifically designed to fit like a glove. It's light weight, made of kevlar and installs or removes quick and easy. It's equipped with a fresh SFI 4.1 tag, making it NHRA "tech friendly" and the most popular choice of many of the Top Fuel Dragster and Nitro Funny Car teams on tour. If you're looking for a nice clean well fitting product, then you just found it right here! Order quality racing components 24/7 on our website! GoNitrolink.com
We offer a complete line of all Taylor Motorsports Products!
Taylor Transmission Blanket
If you've been shopping around for this next item, then keep in mind a proper fit is key to a long lasting component that will provide years of service if maintained properly... This Taylor Transmission Blanket is quality craftsmanship at it's finest! It's durable construction, both inside and out are sure to meet all you're expectations. It's NHRA "tech friendly" with SFI 4.1 tags and can be ordered to fit all Lenco CS-1, or CS-2, (2, 3, 4 or 5 speed) transmissions. As well as B&J 2 speed, or big boy 3 speed transmissions. All are equipped with handy grip handles on each end for easy transmission installation or removal in between rounds. And can be ordered in either an oil repellent nylon or upgraded light weight kevlar outer shell... One more quality product, for your quality race team!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Do you like this item? And can you put it to work? Call or message us your reasonable offer! And if it make sense, then this item is yours!!!
Used Richmond Pro Gear Set
If you're on the hunt for a slightly Used Richmond Pro Gear Set with a 4.57 ratio then get ready to save some hard earned cash! This one works with your 9" size ford style rear ends and is in great shape with normal minimal wear. The big pinion shaft is the 35 spline 1 1/2" size, with a dual drilled ring gear that works with either your 1/2" or 7/16" size bolts. And the best news is the customer friendly price tag... Click on "buy now" before it's gone!
