Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Crower Pedal Clutch
We all know the importance of having a good clutch program in place and how setting your race car up with the correct components right from the start can save you countless hours in the pits, multiple runs on the track and a whole lot of frustration. And if your looking to potentially save thousands of $$$'s at the same time... Then we might just have the solution right here!!! This Crower Pedal Clutch could work on your nitro, alcohol, or gas burning front or rear engine Dragster, Funny Car, Altered, or Nostalgia A/Fuel Car. It's slightly used and in great shape. And in fact, has only 1 burnout on it since it was inspected. This one's the 10.7 size, equipped with the lighter weight aluminum pressure plate, flywheel and upgraded titanium donut. It's set up to run 3 disks (not included) and is the 6 stand model with the popular big stands and titanium adjusters. This set-up was recently certed, and is ready for showtime!!!
Why buy new???
So, if you've had a chance to shop around for a new Pedal Clutch... Then be prepared to spend right at $5,000 bucks or more for a set-up like this one! But don't even think about doing that if you're looking to save BIG time! This one will sell for half the cost of new, making this the perfect opportunity to save thousands!!!
Available immediately and priced to move.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Crower Pedal Clutch
How about a clutch program that's sure to help all Racers on a tight budget tow up to the lanes that much quicker! And if your looking to potentially save thousands of $$$'s at the same time... Then we might just have the solution right here!!! This Crower Pedal Clutch could work on your nitro, alcohol, or gas burning front or rear engine Dragster, Altered, or Nostalgia A/Fuel Car. It's slightly used and in great shape and has not been run since it's last inspection. This one's the 10" size, equipped with the lighter weight aluminum pressure plate, flywheel and donut. It's set up to run 2 disks (not included) and is the 6 stand model with 1/2" studs, with all adjusters included made of titanium.
Why buy new???
So, if you've had a chance to shop around for a new Pedal Clutch. Then be prepared to spend right at $3,500 bucks or more for a set-up like this one! But don't even think about doing that if you're looking to save BIG time! This one will sell for way less than the cost of new so don't delay, order today!
Priced to move at: Only $1695.00
We offer a complete line of all Taylor Motorsports Products!
Taylor Transmission Blanket
If you've been shopping around for this next item, then keep in mind a proper fit is key to a long lasting component that will provide years of service if maintained properly... This Taylor Transmission Blanket is quality craftsmanship at it's finest! It's durable construction, both inside and out are sure to meet all you're expectations. It's NHRA "tech friendly" with SFI 4.1 tags and can be ordered to fit all Lenco CS-1, or CS-2, (2, 3, 4 or 5 speed) transmissions. As well as B&J 2 speed, or big boy 3 speed transmissions. All are equipped with handy grip handles on each end for easy transmission installation or removal in between rounds. And can be ordered in either an oil repellent nylon or upgraded light weight kevlar outer shell... One more quality product, for your quality race team!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Moore Performance Products!
Moore Performance Reverser
Quality craftsmanship, durability and performance!!! This state of the art brand new
Moore Performance Reverser checks all the boxes in these 3 categories... And here's the proof! This is the exact component being used by most every "Big Show" top fuel and nitro funny car team out there! Along with the majority of the A/Fuel Dragsters and Alcohol Funny Cars, simply because it works! Lets start with the sleek looking, finished billet aluminum case. This low profile design is anodized black and the lightest available on the market. And can be ordered with a bellhousing style, or cannon style mount. Each unit comes loaded with a 1 3/4", 40 spline steel output shaft for maximum strength under the highest extreme racing conditions that only 11,000 horsepower can produce. On the race track, this Reverser has delivered unmatched reliability for over 24 years. And comes complete with a built-in air actuated neutral safety feature required for NHRA pro competition to complete this very special package. Order yours today! Or give us a call with any questions, as we're here to help anytime!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Moore Performance Products!
Rob Moore Reverser
Quality craftsmanship, durability and performance!!! This state of the art brand new
Rob Moore Reverser is the lightest available on the market! And can be ordered to work with your Lenco or B&J transmission, with custom output shaft lengths also available. Check out the sleek looking finished billet aluminum case with it's low profile design that's anodized black. Order yours with a bellhousing style mount like this one, or with a cannon style mount. Each unit comes loaded with a 1 3/4", 40 spline steel output shaft for maximum strength under the highest extreme racing conditions that only 11,000 horsepower can produce. On the race track, this Reverser has delivered unmatched reliability for over 24 years. And is the exact component being used by most every "Big Show" top fuel and nitro funny car team out there! Along with the majority of the A/Fuel Dragsters and Alcohol Funny Cars, simply because it works! And it comes complete with a built-in air actuated neutral safety feature required for NHRA pro competition to complete this very special package. Order yours today! Or give us a call with any questions, as we're here to help anytime!
Price: $4079.00
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
We offer a complete line of all Rob Moore Performance Products!
Moore Performance Custom Input Shafts
Performance, Durability and the choice of Champions is what you're looking at right here! Check out these brand new Moore Performance Custom Input Shafts that are being offered in 3 popular sizes: 1 3/8" 10 spline, 1 3/4" 10 spline, or 1 7/8" 10 spline on the clutch pack side. They're sold separately and can be ordered to work with your Moore Performance or Lenco reverser if you're running direct drive. Or, Lenco or B&J transmissions, with your choice of either a large or small pilot size. They're made of heat treated steel and another example of craftsmanship at its finest! Next level, hi performance components 24/7 right here! GoNitrolink.com
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
We offer a complete line of all Rob Moore Performance Products!
Moore Performance Reverser Output Shafts
Quality second to none is exactly what you'll find right here! And these brand new
Moore Performance Reverser Output Shafts are the only choice of the majority of the pro nitro teams on tour for two reasons... Performance & Durability! These are sold separately and work specifically with the Moore Reverser. They're the standard 1 3/4" 40 spline style that's offered in 2 lengths: Large = 6" out from the reverser. Or, Small = 3.265" out from the reverser, with other custom lengths available. They're made of heat treated steel and are a work of art when it comes to craftsmanship! Hi performance taken to the next level, right here! GoNitrolink.com
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Molinari Titanium Pedal Clutch
Top of the line hi-performance is what you're looking at right here with this state of the art upgraded Molinari Titanium Pedal Clutch that's available immediately and ready to take your clutch program to the next level! This one's the 10.5 size, 6 large stand style, that utilizes 3 disks. It was made by Molinari Racing Products and features an all titanium pressure plate, donut and 426 hemi flywheel. Plus, it's as close to being brand new as you can get, with only 1 race! It's free of any damage or repairs and comes complete with a slightly used set of ARP flywheel bolts and a dial indicator with case that are also included as well. And here's more great news...
1. This one's in stock and ready to ship immediately... Zero wait time!
2. Save almost a "grand" off the new price, buying this one right here!
3. The road to the winners circle is shorter than you think! GoNitrolink.com
Priced to move at only: $9500. + shipping.
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Clutch Pack Loader
Helping your race team stay efficient and organized on your journey to the winners circle is what we do best! And adding a brand new Clutch Pack Loader like this one to your program is sure to check both of those boxes! This heavy duty tool is professionally made of aluminum with billet components and anodized black. It completely eliminates having to install each disk and floater separately, one at a time. Just load your complete clutch pack with both disks and floaters directly on to the loader. Then carry everything out to the car, then slide everything off the loader using your clutch pack line up tool (sold separately) for a much quicker, more efficient installation. It comes equipped with a handle at the top and billet stands on the bottom so it sits upright next to the car ready to go to work! And can be ordered to work with your 10", 10.5", or 10.7" clutch component sizes, equipped with either 1/2", 9/16", or 5'8" size flywheel studs. Also choose your stand count: 6, 8, or 9 stand. And your disk count: 2, 3, 4, 5, or 6 and you're all set... Save more, Race more, Win more! GoNitrolink.com
Price: Only $325.00 + Shipping.
Please note: Multiple configurations available. Please call: (916) 425-1427 to purchase.
Another "Racers Discount" brand new product... Without the brand new price!!!
New Boninfante 10.5" Clutch Disks
At the moment... We have a good, limited supply of New Boninfante 10.5" Clutch Disks in stock and ready to ship!!! These have a .390 thickness with the popular 1 3/4", 10 spline hub. And the best news is, we can get these headed your way without all the down time and hassle! And if you need floaters to go with 'em, we can do that too!
When you think Nitro & Alcohol consumables... Think GoNitrolink.com
Priced to move at: Only $195.00 each
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Another "Racers Discount" brand new product... Without the brand new price!!!
New Custom Floater 10.5" Clutch Floaters
The supply is limited, so take advantage while they last!!! These New Custom Floater 10.5" Clutch Floaters are in stock and ready to ship! These have a .350" thickness and are the 6 stand, 6 cutter (1/2" wide) large stand style. And the best news is, we can get these headed your way without all the down time and hassle! And if you need 10.5" clutch disks to go with 'em, we can do that too!
Save more, Race more, Win more! GoNitrolink.com
Priced to move at: Only $75.00 each
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Universal Parts Tray
Check out this Universal Parts Tray that's sure to help keep your race team efficient and organized on race day! This quality item is made of aluminum, so it can handle all the brake cleaner or parts washer solvent you can throw at it! And it works perfect under the engine when your bottom end technician is changing out bearings. Or when your cylinder head or clutch specialist is servicing those components on the work bench or on the ground. The outside edges measure the standard 17 3/4" x 26" total so it will stow away nicely under your pit table in between rounds. Or, in your race trailer during transport. Hard to find pit items available right here 24/7! GoNitrolink.com
Sold Separately
