Billet Air Bleed
Attention all Crew Chiefs!!! Just prior to pulling your driver up into the starting beams, wouldn't it be great if you could do away with that whole push-lock tuning plug program you've been having to deal with? Well, this next item may be just what you're looking for! This custom Billet Air Bleed was designed specifically to adjust idle speed on blown nitro or alcohol engines where a specific RPM is critical for staging, starting line launch and clutch management. This high quality component is machined from billet aluminum, is durable, light weight and allows for precise adjustability in very small increments until fully closed. It mounts to your injector hat and has a serrated edge to assure fumble free adjustments when it's time to put down a number! Order today... And it's on the way!
We offer a complete line of all Automan products!
Billet Burnout Stops
It's sleek, it's profiled, it's just plain awesome! These super trick Billet Burnout Stops are a team owners best friend when it comes to keeping engine RPM at a safe level during the burnout. Installs instantly on your throttle cable by the injector throttle stop. After the back up, simply pull the ring attached to the stainless safety pin clip to remove it, then bring your driver up to the beams! They're made of billet aluminum, polished and anodized for a bright brilliant shine, to stand out so you don't forget to take them off. And they're available in 2 throttle cable sizes, 10/32" or 1/4" inch. Length may need to be adjusted if needed. Instruction sheet included... Top quality products = a top quality race team! GoNitrolink.com
Buzzardcatcher Injector Gaskets
GoNitrolink.com for all your consumables! And we'll help save you both time and money by offering products like these Buzzardcatcher Injector Gaskets made by Felpro to keep your race budget in line! The bolt holes measures the standard 4 1/2" x 13 1/4" center to center, with a 4 1/4" x 14" opening. This is one of those items that definitely needs to be put in the race trailer before the big day! Remember, don't forget your spares!
Enderle Buzzard Injector
Anodized black for that awesome stealth look!!! And that only makes it easier to imagine how cool this Enderle Buzzard Injector would look bolted up to your ride! This one's slightly used, in great shape with no damage or repairs. And ready to offer it's new owner that iconic look that will never go out of style. Freshly anodized and ready to install, this injector has mounting holes that measure the standard 15 1/4" x 4 3/8" center to center with the bottom opening measuring 15" x 4 7/16" total. And it comes loaded with throttle arms and throttle stops also included as well. The large 5" size butterflies are in great shape allowing the throttle shaft to operate nice and smooth with no binding. And if you need a super trick Billet Starting Line Air Bleed Valve to go with it (sold separately)... We can do that too! Quality Racing Components 24/7 right here... GoNitrolink.com
Enderle Throttle Arm - Double End
Keep that blower injector performing at its best with this brand new Enderle Throttle Arm - Double End. This one can be ordered in either 5/16" splined shaft size for Bugcatcher Injectors, or 7/16" size for Bird or Buzzardcatcher Injectors. It's made of light weight billet aluminum and anodized black for that stealth look... GoNitrolink.com for all your high performance replacement parts!
Choose shaft size needed in the "options" menu below.
Felpro Bug / Birdcatcher Gaskets
GoNitrolink.com for all your consumables! And we'll help save you both time and money by offering products like these Felpro Bug / Birdcatcher Injector Gaskets to keep your race budget in line! The bolt holes measures the standard 4 1/2" x 13 1/4" center to center, with a 4 1/2" x 13 11/16" opening. This is one of those items that definitely needs to be put in the race trailer before the big day! Remember, don't forget your spares!
Heavy Duty Throttle Return Spring
Yes, we have them right here!!! These are the very popular Heavy Duty Throttle Return Springs that most of the pro nitro teams are using on their injector. And the great news is, now you know exactly where to go to get them just like they do. These are the swivel end style that offer a sharp positive return and definitely one of those hard to find items when you need one quickly. Order one for the car... And one for a spare... Then you're set!
PSI Magnesium Blower Injector & Barrel Valve
Check out this PSI Magnesium Blower Injector & Barrel Valve. This one's the popular larger "Funny Car" style, is slightly used and ready to go to work... It's equipped with a super trick Injector Lip & Diverter Plate for maximum performance. And is designed to work with your PSI Screw Blower. The outside finish has a little tarnish from sitting in the box at the race shop. And the overall condition looks great. It measures 5 1/8" tall, by 16" long. Butterflies measure 4 1/8" tall. Blower opening at the bottom is 12" long by 12 5/8" at its widest point. Butterfly shaft measures 22" across and operates nice and smooth with absolutely no binding. And for all you weight conscious racers out there... This is definitely the answer!!! The Injector itself weighs in at only 10 lbs!!! Just compare that with an aluminum Birdcatcher that weighs almost 17 lbs... Also included is an Enderle K style Barrel Valve that's slightly used and set up for alcohol. It's also free of any damage and is equipped with (3) #6 size Check Valves. And it also operates nice and smooth with no binding. And finally, to make the deal even better... We'll also include a Taylor Blower Restraint and 4 Header Brackets. This special package comes with everything you see in the photos. Throttle Stops, Nozzles, Barrel Valve, Check Valves, Throttle Arm, Cable Bracket and Holder are all included. This Injector is ready for show time and will sell for a fraction of the cost of buying elsewhere!!!
Starting Line Injector Air Bleed Valve
Here it is!!! The #1 most popular style Starting Line Injector Air Bleed Valve that the majority of the pro nitro crew chiefs reach for right before they bring their driver up to the line! This high quality component will not disappoint. It's brand new, made of light weight billet aluminum and responsible for controlling your idle speed on the starting line. It's equipped with a 1/4" pipe thread and installs on the side of your injector. And can be used in pairs if you choose. This set up is the perfect solution for a precise idle adjustment, right before you put down a number!!!
MAKE OFFER!!!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Titanium Injector Shaft
Strong, light weight and ready to fly, this upgraded slightly Used Titanium Injector Shaft is designed specifically for all you weight conscience racers out there! This one's in nice shape and measures 20 1/2" long, with a 1/2" diameter. Both ends are equipped with the common 7/16" spline size to accommodate your throttle arms and stops. Expect to pay over $600 bucks for a new one elsewhere! But not here... Not today! Shop right here at GoNitrolink.com for all you're super trick titanium components!
MAKE OFFER!!!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Titanium Injector Shaft
Go with "Nitrolink" for super trick titanium components like this upgraded slightly
Used Titanium Injector Shaft designed specifically for all you weight conscience racers out there! This one in nice shape and measures 22 1/4" long, with a 1/2" diameter. Both ends are equipped with the common 7/16" spline size to accommodate your throttle arms and stops. And we'll throw in a complete set of (9) stainless button heads for your injector blades to complete the package! Expect to pay over $600 bucks for a new one elsewhere! But not here... Not today! Save more, race more, win more! GoNitrolink.com
Outfit your whole car with XRP Hose & Fittings here at GoNitrolink.com & SAVE!!!
XRP 30° Crimp Style Hose Ends
The majority of the pro nitro & alcohol teams on tour choose XRP products just like these for 2 main reasons... Unmatched quality and performance! And these XRP 30° Crimp Style Hose Ends are ready to deliver both! They're offered in either black for that awesome stealth look, or the popular nickel silver color. And can be ordered in sizes 4,6,8,10,12,16, or 20. PLEASE NOTE: This style fitting is designed to work specifically with the kevlar hose and crimp style collars only. They can be used as an oil line, or fuel line fitting as they're compatible with nitro, alcohol, or gas. And offer a quick, smooth installation or removal in between rounds. They can be ordered separately, or group up your whole order and save even more!
Call: (916) 425-1427 for larger order discounts.
Choose size & color in the "options" menu below.
