AN Fitting Cap & Plug Kit
This next item offered here on GoNitrolink.com has only one job to do and that is to help keep both your fuel and oil system clean and in the condition needed to assure maximum performance on the race track! This brand new plastic AN Fitting Cap & Plug Kit offers all the popular sizes needed to keep all your open lines and fittings covered to eliminate any dust, dirt, metal shavings, or debris from ruining your weekend. It also helps eliminate those annoying drips in your pit area, or on your trailer or race shop floor. This handy assortment includes both caps and plugs in -3, -4, -5, -6, -8, -10, -12 and -16 sizes. And it comes complete with a metal carrying case that stores away easily in your race trailer or race shop and keeps all sizes organized neatly. So, if you pay close attention to all the details when it comes to streamlining your racing operation, then this kit is definitely for you!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Don Jackson BDK Valve
When it comes to fuel or air flow management a Don Jackson BDK Valve is one of the most dependable and easiest ways to get the job done right! This ones slightly used, made of light weight billet aluminum and anodized black. It measures 9" tall and both the inlet/outlet are ready to accept your #10 size hose fittings (not included). It allows you to regulate fuel pressure making it easier on your fuel pump. Or they can also work in conjunction with your clutch management system by allowing you to adjust air pressure. In either application, just a simple turn of the valve on top does it all... They can work with any nitro, alcohol, or gas set-up's and this one's in excellent shape and free of any damage or repairs.
Why buy new??? If you've had a chance to shop around for a new Jackson BDK lately, then be prepared to pay between $750 to $950 depending on the size!!! But why even think of doing that when you can pick up this slightly used one right here... And save several hundred bucks at the same time!!!
Enderle 3-Way Fuel Shut-Off
It's small, lightweight and flows the full line size! That's the best way to describe this brand new Enderle 3-Way Fuel Shut-Off that easily installs between your fuel pump outlet and metering valve, with the outlet on the side returning fuel back to the tank. When in the "off" position, it allows you to turn the engine over to adjust valves, check timing marks, etc; without feeding fuel into the engine. It's equipped with a pump fitting and can be ordered with either -6, or -8 size flared fittings, your choice! Cable clamp also included. GoNitrolink.com for unmatched customer service anywhere!
Choose either -6, or -8 size in the "options" menu below.
"Nitrolink" offers a complete line of all Enderle Products!
Enderle K-Style Barrel Valve
Now here's an item that's stood the test of time simply because of how well it performs on the racetrack! This brand new Enderle K-Style Barrel Valve is used on a wide variety of applications. Sometimes referred to as a metering valve assembly, these can be set up for blown nitro, alcohol, or gas. Or, if you're running a tunnel ram with 2 check valves included. They're precision machined from aluminum and anodized black. It's ready to accept your -6, and -8 size hose fittings and has provisions to run port nozzles and a pump saver check valve. Recommended when you're running a fuel pump flowing 12 GPM or more. And the "high flow" model is also available for nitro applications as well. Shop smart... Race often... Go with Nitrolink!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Fuel Pump Inlet
If you're running a fuel pump that utilizes a screw in style Fuel Pump Inlet like this one, then step right up! This one's slightly used, made of light weight aluminum and anodized black. It's equipped with a -16 AN o-ring fitting on one side and a 1 1/4" size inlet on the other. Check here first for other hard to find replacement components like this one and get ready to save!
Inline Fuel & Oil Filter Chassis Clamp
If you're running one of the inline fuel or oil filters we have, then you'll probably want to take a look at this brand new Inline Fuel & Oil Filter Chassis Clamp for that professional, finished look your race team is known for! They're made of light weight billet aluminum and this style clamp bolts directly to your chassis frame to support the complete set-up. Specifically designed for these types of filters, this clamp securely holds everything in place, or makes it easy to remove your filter for service in between rounds. Longer style filters may require 2 clamps. These can be ordered to work with either the 2", or 2 1/4" diameter size filters. Just choose your chassis tube o.d. size, 1.000", 1.125", 1.250", 1.375", 1.500", 1.625", or 1.750 and we'll handle the rest!
Choose Filter Diameter & Tube Diameter needed in the "options" menu below.
Inline Fuel & Oil Filter D-Clamp
If you're running one of the inline fuel or oil filters we have, then you'll probably want to take a look at this brand new Inline Fuel & Oil Filter D-Clamp for that professional, finished look your race team is known for! They're made of light weight billet aluminum and this style clamp bolts up to most any durable flat surface, or tab strong enough to support the complete set-up. Specifically designed for these types of filters, this clamp securely holds everything in place, or makes it easy to remove your filter for service in between rounds. Longer style filters may require 2 clamps. These can be ordered to work with either the 2", or 2 1/4" diameter size filters, so we have you covered either way!
Choose Filter Diameter needed in the "options" menu below.
JT Stewart Barrel Valve
Both unmatched performance and reliability can be found right here with this brand new
JT Stewart Barrel Valve that's designed to work with your nostalgia nitro or injected A/Fuel application. This hi performance component is state of the art when compared to other less expensive brands on the market. And used by the majority of the nostalgia top fuel, nostalgia nitro funny car and A/Fuel teams on tour. Each one is equipped with a super handy idle mixture screw that eliminates having to fumble with turnbuckle linkage adjustments. This extra added feature now allows your crew chief to make precise fine tuning adjustments right on the starting line just before the run. It comes complete with all ORB fittings installed for your inlet, outlet and return lines and can be ordered in either -8, -10, or -12 sizes wherever you choose... One call does it all when you're ready to take your fuel system to the next level! GoNitrolink.com
Price: $1175.00
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all System 1 products!
System 1 Billet Dry Sump Hemi Oil Pump
Once you tow up, your attention is directed to making sure your race car starts... After that, you better have good oil pressure, right! This System 1 Billet Dry Sump Hemi Oil Pump is the exact same component many of the pro nitro teams on tour are using for several reasons. They're outstanding flow characteristics, versatility and long-term dependability are counted on weekly to keep those 11,000 horsepower engine alive! And could work just as well for your team! They can be set up to work on your "Big Show" Funny Car, Alcohol Funny Car, Pro Mod, etc. And can be ordered in 2 basic sizes, either 1.8 or 2.1 gear sizes. Pump is loaded with you're standard 5/16" size drive and equipped with an AN -8 size o-ring boss port for functions such as oil pressure gauge, Racepak or other on-board computer sensor, or rear oiling. And can be set with two adjustable pressure ranges (80-125 psi “low” and 125-250 psi “high”) and also includes two AN -12 IN/OUT fittings for the filter and stainless hard loop line. Give us a call with any questions as we're here to help anytime!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all System 1 products.
System 1 Billet Wet Sump Hemi Oil Pump
Once you tow up, your attention is directed to making sure your race car starts... After that, you better have good oil pressure, right! This System 1 Billet Wet Sump Hemi Oil Pump is the exact same component many of the pro nitro teams on tour are using for several reasons. They're outstanding flow characteristics, versatility and long-term dependability are counted on weekly to keep those 11,000 horsepower engine alive. And could work just as well for your team! They can be ordered in the following: 1.8, 2.1, 2.4, 2.7, or 3-inch tall gear size, to provide the desired volume (up to 50 GPM) and can be set with adjustable pressure ranges (80-125 psi “low” and 125-250 psi “high”) for virtually every application from fuel injected A/Fuel cars, to nitro-burning supercharged “Big Show” cars. Choose from three different style oil pick-up fittings; AN -16, AN -20, or special AN -16 quick-disconnect fitting for use with System 1’s special scavenging hose. This pump is equipped with an AN -8 size o-ring boss port for functions such as oil pressure gauge, Racepak or other on-board computer sensor, or rear oiling. And also includes two AN -12 IN/OUT fittings for the filter. They're machined for an AN -20 fitting on the scavenge side of the pump (AN -16 to AN -20 fittings available).
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all System 1 products!
System 1 Inline Fuel Filters
The distance between your fuel tank and the injector is not always as clean as it needs to be... This problem can cause a wide range of issues including lean cylinders, fuel pump, or barrel valve damage, and so on! So, lets offer a wide variety of brand new System 1 Inline Fuel Filters to fit your specific race application. This quality component can be ordered to work with nitro, alcohol, or gas. And is offered in either a 2 inch, or 2 1/4 inch diameter, with a length choice of 6, 9, or 11, inches long. The removable filter element makes it easy to service in between rounds and see exactly what's not going into your fuel system. Yours can be assembled with either a 35-micron filter, excellent for use in high fuel demand carbureted applications and nominally flows 24 GPM. Or, the 75-micron filter that's ideal for use between the pump and barrel valve. Set up with your choice of AN -6, AN -8, AN -10, or AN -12 fittings. And available in either red or black. Order yours today!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used AFT Slide Valve - Large
Another budget friendly high performance component would be this slightly Used AFT Slide Valve - Large style, designed for the larger size fuel systems to help with fuel management. This one's ready to accepts your -10 size fittings and is in great shape, made of billet aluminum and works in conjunction with your BDK Valve. Fuel management at a deep discounted price, right here!
