Complete 426 Hemi Rocker Assembly
So, if you're running a Nostalgia Nitro Funny Car or Top Fuel Dragster, AA/Fuel Altered, Doorslammer, Drag Boat, or Tractor Puller on Nitro, Alcohol, or Gas, then check out this brand new Complete 426 Hemi Rocker Assembly that's definitely some of the best equipment money can buy for strength, durability and performance.
This standard ratio set, loaded with brand new billet stands can be ordered to works with either 9/16" or 1/2" head studs. Both new intake and exhaust rockers are made by Manton and are the upgraded billet pressure fed oiler style and one of the strongest on the market. Intakes are the popular 1.7 ratio, with the exhaust offering the standard 1.65 ratio. All rockers are equipped with the larger 7/16" adjusters with the 3/8 ball, however can be ordered with a smaller ball size to match your existing pushrod cup size if you choose. The new Manton steel shafts have a .250 wall thickness and the new adjusters, nuts, shims, hardware and springs are included as well. This set-up works with your BAE, Dart, or Alan Johnson fuel heads that bolt up to your TFX, BAE, or Keith Black cast or billet block. However, if you're running "fat heads" like what the A/Fuel cars are running, (such as Brad 4's, 5's 6's, etc.) these will not adapt to your application. This set-up is complete out of the box and ready to bolt on and go racing...
Top of the line racing components + Unmatched customer service = GoNitrolink.com
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Alan Johnson 426 Hemi Rocker Assembly
Probably one of the most popular hard to find Hemi items would be a top of the line complete Alan Johnson 426 Hemi Rocker Assembly. This hi-ratio set with Alan Johnson billet stands and upgraded Titanium Shafts is loaded with a BRAND NEW set of Stage 5 (1.75 ratio) Intake Rockers. And a slightly used set of Cluff (standard ratio) Exhaust Rockers. All Rockers are equipped with the larger size 7/16" adjusters with the 3/8 ball, which is pretty cool, because now you don't have to switch wrenches etc; to adjust both your Intake & Exhaust Rockers. All Stands, Shafts, Adjusters & Nuts are in great shape with no damage. And all shims & springs are brand new and included as well. This set-up works with your BAE, Dart, or Alan Johnson Fuel Heads that bolt up to your Keith Black, BAE, or TFX Rodeck cast or billet block. However, if you're running "fat heads" like what the A/Fuel cars are running, (such as Brad 4's, 5's 6's, etc:) these will not adapt to your application.
Brand new price to duplicate everything you see here is going to set you back over $9500 Bucks!!! But not here... Not today! This complete set-up is definitely some of the best equipment money can buy for strength, durability and performance. And ready to install right out of the box and go racing... Save more, Race more, Win more! GoNitrolink.com
Dechellis 426 Hemi Rocker Assembly
So if you're running a Top Fuel or Nostalgia Dragster, Nitro or Alcohol Funny Car, AA/Fuel Altered, Doorslammer, Drag Boat, or Tractor Puller on Nitro, Alcohol, or Gas. And are in the market for an awesome set-up loaded with the works, then check out this slightly used Dechellis 426 Hemi Rocker Assembly. This hi-ratio set is loaded with RS2 billet stands and upgraded Titanium Shafts. And features Stage 5 (1.7) standard Intake Rockers. As well as a set of Stage 5 Exhaust Rockers. All Rockers are equipped with the larger 7/16" adjusters with the larger 3/8 ball, which is pretty cool, because now you don't have to switch wrenches etc; to adjust both your Intake & Exhaust Rockers. Everything's in nice shape with your common nicks and scratches from normal minimal wear. Outside surface, rocker tips, threads and so on are free of any damage or repairs. All adjusters, nuts, shims & springs are included and this set-up works with your BAE, Dart, or Alan Johnson Fuel Heads that bolt up to your Keith Black, BAE, or TFX Rodeck cast or billet block. However, if you're running "fat heads" like what the A/Fuel cars are running, (such as Brad 4's, 5's 6's, etc.) these will not adapt to your application. This set-up is complete, in stock and ready to bolt on and go racing!!! GoNitrolink.com
Alan Johnson 392 Hemi Blower Manifold
Buy this one right here today... Without having to wait months for delivery!!! Check out this slightly used Alan Johnson 392 Hemi Blower Manifold for your nitro, alcohol, or gas burning Dragster, Funny Car, Altered, Drag Boat, or ? This one's the upgraded light weight magnesium 6 bolt style, that's in great shape and free of any damage or repairs. It measures right at 5 7/16" tall. With the Blower opening at the top measuring 4" wide by 13 5/8" long. It has provisions to run port nozzles if you choose. Otherwise, just plug them off. And it's also set up to run the standard, large size burst panel in the front (sold separately). This manifold is o-ring ready at the top and can work with most any 6-71 to 14-71 roots style superchargers. And could be used with any 392 Hemi 6 bolt style Cylinder Heads... Save more, Race more, Win more! GoNitrolink.com
Alan Johnson 426 Hemi Blower Manifold
Super clean and ready to install right out of the box! Check out this Alan Johnson 426 Hemi Blower Manifold for your nitro, alcohol, or gas burning Dragster, Funny Car, Altered, Drag Boat, or ? This manifold is the .100 tall, 6 bolt style that's slightly used, in great shape and made of light weight magnesium. It free of any damage or repairs and measures right at 6" tall. And has provisions to run port nozzles if you choose. Otherwise, just plug them off. Oil filler inlet location is in the back for easy access (cap not included). And this one's set up to run the standard, large size burst panel in the back (sold separately). However, it can be easily modified to run a burst panel in the front if you choose. The Blower opening at the top is o-ring ready and measures the standard 4 1/4" wide by 15 13/16" long. And this manifold can work with your SSI, Kobelco, Littlefield, PSI, Mooneyham, or Kuhl, 6-71 to 14-71 roots style superchargers. It can be used with your fuel heads made by BAE, or Dart, that are set up for a 6 bolt manifold. As well as any Alan Johnson Stage 5's, 6's, or 7 fuel heads.
PLEASE NOTE: This manifold WILL NOT work if you're running "fatheads" like the A/Fuel cars are running, (such as Brad Stage 3's, 4's, 5's, etc). A brand new manifold just like this one is going to set you back over $3400 Bucks!!! But don't even think about spending that much when you can pick up this super clean set-up right here for a fraction of the cost... Helping your team save big $$$'s is why we're here! GoNitrolink.com
Priced to move at: Only $2495. Or best offer.
Slightly Used
Jesel 426 Hemi Roller Lifters
Been looking for a nice slightly used set of top of the line Jesel 426 Hemi Roller Lifters without having to spend $3,700 Bucks for a new set? Well then you're definitely looking in the right place here!!! This complete set of (8) pair is the larger 1 1/16" lifter bore size. And can work with your TFX, BAE, or Keith Black, cast or billet block. They're equipped with a .37" diameter pin, with the rollers measuring .56" wide. And a 2" spread. All rollers are in nice used condition, with lifter outside surfaces showing normal minimal wear. So if you need a set, here they are... If you have a set, then don't hit the road without spares...
Hi-Performance Products for Less, is what we do Best! GoNitrolink.com
Price
$1,400.00 – $1,950.00Price range: $1,400.00 through $1,950.00
Total
$1,400.00 – $1,950.00Price range: $1,400.00 through $1,950.00
"Nitrolink" offers a complete line of all Dan Olson Race Products!
Dan Olson Top Fuel - A/Fuel Headers
Check out the photos on this brand new set of Dan Olson Top Fuel - A/Fuel Headers and then think of how awesome they would look on your Top Fuel or A/Fuel Dragster, Blown Altered, Tractor Puller, Drag Boat and so on... They can be ordered to fit any stage fuel heads or fat heads by Alan Johnson, BAE, Dart, etc. And are available in either 2 1/2", or 2 3/4" tube diameter with the standard degree bend. They can be set up with or without EGT bungs ready to accept your Racepak or similar Computer Probes if you're running them. And each set comes complete with lightened reinforcement tube gussets to complete this very nice package!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Used System 1 Dry Sump 426 Hemi Oil Pump
One critical component needed to get your race team to the winners circle is to have good oil pressure! So check out this slightly Used System 1 Dry Sump 426 Hemi Oil Pump that's similar to what many of the pro nitro teams on tour are running simply because of their outstanding flow characteristics, versatility and dependability. This one's in great condition inside and set up with a 1.8 and 2.1 gear size that could work well on your Nostalgia Nitro Funny Car, Alcohol Funny Car, Pro Mod, etc. It features you're standard 5/16" size drive and equipped with an AN -4 fitting for functions such as oil pressure gauge, Racepak or other on-board computer sensor, or rear oiling. Plus, two AN -12 IN/OUT fittings for the filter and a stainless hard loop line are included as well...
Personalized Customer Service second to none! GoNitrolink.com
Sitko 426 Hemi Mag Drive
If you're looking to simplify your ignition system, without have to run all the advanced and sometimes complicated timing control components then this brand new Sitko 426 Hemi Mag Drive just might be the answer. This top of the line quality component is the single mag, offset, air actuated style that allows you to retard your timing during the run either manually, or with the help of a simple timer system. It's made of billet aluminum, belt driven and equipped with a bronze gear and standard 5/16" stem. It comes complete with an idler bracket support and ready to accept your MSD or Mallory Magnetos that are equipped with the Dunn style gear. Hard to find racing components right here 24/7... GoNitrolink.com
Keith Black 426 Hemi Magnesium Valve Covers
Go with Nitrolink Racing Components for all your hard to find racing parts and accessories! And we'll keep delivering items just like this rare, set of Keith Black 426 Hemi Magnesium Valve Covers to help raise the cool factor on your awesome ride just a little more! This set is made of light weight magnesium, then was dow 7 coated for that signature look. They're slightly used, in very nice shape and free of any damage or repairs and ready to work with your fuel heads equipped with 5/16" size studs. Plus, they're the extremely popular dual plug style, that can also be used if you're only running 8 spark plugs by simply adding a set of removable aluminum block-off caps (sold separately). Includes everything you see in the photos. Plug tubes sold separately. This style valve cover is getting tougher to find out there in this condition and won't last long, so just like on the race track, reaction time will win this set right here! Hard to find racing components taken to the next level right here! GoNitrolink.com
Another BRAND NEW item... Without the brand new price!!!
392 Hemi Alcohol Dragster Headers
Quality racing components taken to the next level right here at GoNitrolink.com!
And if you're in the market for a brand new set of 392 Hemi Alcohol Dragster Headers for your Alcohol Dragster, Blown Alcohol Altered, Drag Boat, etc; then look no further... This set was made by Shorty's and in excellent shape with a pipe diameter measuring
2 1/2" total, with the standard degree bend. They're set up to work with your AJPE 392 billet fuel heads and equipped with EGT bungs on the top, ready to accept your Racepak or other brand EGT probes (sold separately). Or, just cap them off if you're not running a computer. And check out the lightened reinforcement tube gussets for extra added strength to complete this very nice package! Order this set right here... And have money left over by not having to buy new elsewhere!
PLEASE NOTE: These headers will not adapt to your application if your running 426 fuel heads or fatheads.
Sitko Standard 426 Hemi Mag Drive
A top of the line quality component, with an affordable price!!! Is exactly what you'll find right here with this brand new Sitko Standard 426 Hemi Mag Drive that's ready to be pressed into service right out of the box! This single style mag drive is made of billet aluminum, with the standard offset. And is belt driven and equipped with a bronze gear and standard 5/16" stem. It comes complete with an idler bracket support and is ready to accept your MSD or Mallory Magnetos that are equipped with the Dunn style gear... Save more, race more, win more... GoNitrolink.com
