Engine

Add to Wishlist

IN STOCK & READY TO SHIP!!!

AJPE 426 Hemi Billet Block

The coolest place on the planet to buy all your top of the line racing components like this slightly used, late model AJPE 426 Hemi Billet Block is right here at GoNitrolink.com...

And this one's been freshened up and has not been run since... Line bore, cam journals and main caps were all gone over, so you know your money was well spent here! And it features a standard deck, standard mains, 48 degree raised cam. And loaded with 4.187 sleeves, has a 1 1/16" lifter bore size, a standard 54mm cam journal size and ready to accept you're 9/16" size head studs (not included). It's been professionally repaired (see photos) and has been machined down .015 off the deck surface, with all the sleeves having over-sized registers. Plus, the best news is this one won't cost you $10,000 bucks, plus the wait time to buy a new one elsewhere! This block is in stock, ready to ship... And definitely ready to go to work!!!

Priced to move at Only: $5595. + shipping.

Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.

Tray in photos not included.

AJPE Billet 392 Hemi Heads

Price

Call for Price

Quantity

- +

Total

Call for Price

Information

Add to Wishlist

AJPE Billet 392 Hemi Heads

Serviced and ready to run!!! Is exactly what you'll find when this "complete" set of

AJPE Billet 392 Hemi Heads show up on your doorstep! This slightly used set is in great shape and free of any damage or repairs. And ready to work with your 6 bolt style intake manifold. They're loaded with a slightly used set of beadlock groove Manley 2.125" diameter titanium intakes that measure 5.350" long (5/16" stem). And a set of square groove Manley inconel 1.870" exhaust valves that measure 5.260" long (11/32" stem) with Manley titanium 10° locks & retainers. Plus, a slightly used set of PSI Triple Valve Springs are also included as well. The intake ports are o-ring equipped and the cylinder head surfaces are incredibly smooth and in great shape. Combustion chambers have o-rings installed and have never been blown out or burned thru with chambers having very little normal minimal wear. All valve seats and valve guides are in great shape. And we'll include a complete set of header & intake manifold studs to make this hard to find package even better! And as you probably know, your block must be equipped with head studs, not head bolts. And YOU CANNOT RUN WATER thru these heads.

Brand new, a loaded set identical to these will set you back right at $10,000 Bucks! But not here... Not today! This set is available immediately and ready to ship out today...

The Coolest Race Parts on the Planet + Unmatched Customer Service = GoNitrolink.com

Priced to move at: Only $3995.00

Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.

BAE 426 Hemi Fuel Heads

Price

Call for Price

Quantity

- +

Total

Call for Price

Information

Add to Wishlist

BAE 426 Hemi Fuel Heads

Check out this "complete" set of BAE 426 Hemi Fuel Heads ready for the next Funny Car Chaos event, or your Nostalgia Top Fuel Dragster, Nostalgia Nitro Funny Car, Blown Fuel Altered, Nostalgia A/Fuel, 7.0 Pro, Drag Boat, Tractor Puller and so on. This slightly used set is in great shape and free of any damage or repairs. And works with your standard deck Keith Black, BAE, or TFX Rodeck cast or billet block, using your .100 tall fuel head style manifold. They're the 6 bolt, .100 tall style, loaded with a slightly used set of beadlock groove Manley 2.450 titanium intakes (11/16" stem). And Manley inconel 1.925 exhaust valves (3/8" stem) with Victory titanium retainers and the Manley lash lock system. Plus, a slightly used set of PAC Triple Valve Springs are also included as well. And we'll throw in a complete set of inner head studs, header studs and rocker stand studs to make this deal that much better! Rocker stand dowel pins are the standard 3/8" size and the exhaust flange pattern is also standard and will accommodate most any brand of Hemi fuel head style header, however will not interchange with headers off of fatheads. And as you probably know, your block must be equipped with head studs, not head bolts. And YOU CANNOT RUN WATER thru these heads. The intake ports are o-ring equipped and the cylinder head surfaces are incredibly smooth and in great shape. Combustion chambers have o-rings installed and have never been blown out or burned thru with chambers having very little normal minimal wear. All valve seats and valve guides are in great shape. And this set has provisions to run down nozzles if you choose. They're set up for dual (16 total) spark plugs. However, if your car is set up for 1 plug per cylinder (8 total) no problem... Just plug off 1 hole per cylinder and use your single plug valve covers. Please note: These BAE Fuel Heads are not the "Fatheads" like the A/Fuel Dragsters are running.

Brand new, a loaded set identical to these will set you back right at $10,000 Bucks! But not here... Not today! This set is available immediately and ready to ship out today...

The road to the winners circle may be shorter than you think! GoNitrolink.com

Priced to move at: Only $3895.00

Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.

Alan Johnson Stage 1 Nostalgia Cylinder Heads

Price

Call for Price

Quantity

- +

Total

Call for Price

Information

Add to Wishlist

Alan Johnson Stage 1 Nostalgia Cylinder Heads

Check out this "complete" set of Alan Johnson Stage 1 Nostalgia Cylinder Heads then you'll know one of the reasons why many of the top nostalgia nitro teams on tour are laying down those kind of numbers on race day! This set is the current style, popular because they utilize the smaller intake & exhaust runners making them perfect for use in Nostalgia Top Fuel, Nostalgia Nitro Funny Car, Blown Fuel Altered, Nostalgia A/Fuel, 7.0 Pro, Drag Boat, Tractor Puller and so on. This slightly used set is the single plug style, set up to run 4 spark plugs per head. Both are in excellent shape and work with your standard deck TFX Rodeck, BAE, or Keith Black cast or billet block, using your standard deck fuel head style manifold. The intake ports are o-ring equipped and the cylinder head surfaces are incredibly smooth and in great shape. Combustion chambers have o-rings installed and have never been blown out or burned thru with chambers having very little normal minimal wear. All valve seats and valve guides are in nice shape. And they're loaded with a slightly used set of Victory 2.375 titanium intake and Manley 1.925 exhaust valves, with Victory locks & retainers. And a set of Manley Dual Intake and PAC Triple Valve Springs are also included as well. Plus, we'll include a complete set of inner head studs, intake manifold studs, header studs and valve cover studs to make this deal that much better! Rocker stand dowel pins are the standard 3/8" size and the exhaust flange pattern is also standard and will accommodate most any brand of Hemi fuel head style header, however will not interchange with headers off of fatheads. And as you probably know, your block must be equipped with head studs, not head bolts. And YOU CANNOT RUN WATER thru these heads.

Please note: These AJ Fuel Heads are not the "Fatheads" like the A/Fuel Dragsters are running... So, if you've had a chance to shop around lately, then you know a brand new bare set identical to these will set you back almost $7000 Bucks! But don't even think about spending that much here... This set is complete, available immediately and ready to ship out today. The road to the winners circle may be shorter than you think! GoNitrolink.com

Priced to move at: Only $4500.00 set.

Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.

Engine , Introducing...New Products , Misc. , Safety Equipment

Carbon Fiber Engine Containment Diaper

Price

Call for Price

Quantity

- +

Total

Call for Price

Information

Add to Wishlist

Carbon Fiber Engine Containment Diaper

State of the art nitro & alcohol racing components are what we do best! And when it comes to one of the nicest buckets on the market, check out this brand new Carbon Fiber Engine Containment Diaper that's ready to offer a quicker, cleaner option than the standard fabric style diaper during removal & installation in between rounds. It's light weight and can be ordered to work with either the TFX or BAE/KB 426 Hemi aluminum blocks. And this one, unlike the other carbon fiber bucket on the market comes outfitted with light weight titanium side plates to help offer extra added protection in the event of connecting rod failure. Also included is a set of 4 upgraded kevlar mounting straps that can be ordered with your choice of either the header mount style (pictured) or chassis mount style straps. Both the bucket and straps are NHRA "tech friendly" with current SFI 7.1 tags. And a set of 2 side absorbent pads are also included as well. Please specify your brand of oil pump, wet or dry sump and pan measurements when ordering... The coolest place on the planet for Carbon Fiber Drag Racing Components! GoNitrolink.com

Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.

Clevite 3″ Main Bearings 426 Hemi MB-3564 VU (20) – Upper

Price

Call for Price

Quantity

- +

Total

Call for Price

Information

Add to Wishlist

Nitrolink is you're one stop shop for all Clevite Engine Bearings...

Clevite 3" Main Bearings 426 Hemi MB-3564 VU (20) - Upper

These Clevite 3" Main Bearings 426 Hemi MB-3564 VU (20) - Upper are sold in a pack of (20) and are the standard when it comes to offering a more affordable alternative without the coating. While still providing unmatched quality and performance Clevite Products are know for. They are built on an un-plated, hardened-steel backing for better dimensional accuracy and bore contact. And offer a low-to-medium eccentricity. Manufactured with a lead-indium surface alloy, which allows them to conform better for a precise fit. This style Bearing is by far the most popular with racers competing in a wide variety of classes everywhere!

Racers Discount pricing available! Call: (916) 425-1427 anytime to order.

Bearings available for Hemi, Chevy, or Ford.

Clevite 3″ Main Bearings 426 Hemi MB-3564 VL (20) – Lower

Price

Call for Price

Quantity

- +

Total

Call for Price

Information

Add to Wishlist

Nitrolink is you're one stop shop for all Clevite Engine Bearings...

Clevite 3" Main Bearings 426 Hemi MB-3564 VL (20) - Lower

These Clevite 3" Main Bearings 426 Hemi MB-3564 VL (20) - Lower are sold in a pack of (20) and are the standard when it comes to offering a more affordable alternative without the coating. While still providing unmatched quality and performance Clevite Products are know for. They are built on an un-plated, hardened-steel backing for better dimensional accuracy and bore contact. And offer a low-to-medium eccentricity. Manufactured with a lead-indium surface alloy, which allows them to conform better for a precise fit. This style Bearing is by far the most popular with racers competing in a wide variety of classes everywhere!

Racers Discount pricing available! Call: (916) 425-1427 anytime to order.

Bearings available for Hemi, Chevy, or Ford.

Manton Custom Pushrods

Price

Call for Price

Quantity

- +

Total

Call for Price

Information

Add to Wishlist

Manton Custom Pushrods

Individually handcrafted and inspected for ultimate performance!!! And when it comes to Supercharged, Turbo Charged, Nitrous, or Normally Aspirated Engines, Nitrolink offers Manton Custom Pushrods exclusively in a variety of different length, diameter, tip and cup sizes to meet your specific needs...

The extreme duty S-7 Tool Steel 3 piece style, is mainly used in Top Fuel, A Fuel, Blown Alcohol, Pro Mod, Nostalgia, Tractor Pulling, etc. And is the choice of champions for the majority of the pro nitro and alcohol teams on tour! They're specifically designed to work with extreme cylinder and spring pressures. And can be ordered in: 3/8″, 7/16″, 1/2″, or 9/16″ diameter in any length with a straight tube or tapered, with any variation of taper. And a variety of tips are available in 8620 or H-13.

The Series 5 style is also used in Top Fuel, Pro Stock, Pro Modified, Blown Alcohol, Tractor Pulling, Sprint Car, Offshore Marine, Cup and LS Series. They're made with 4130/4135 chromoly tubing that's heat treated. And can be ordered in: 5/16″, 11/32″, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, or 3/4″ diameter in any length with a straight tube or tapered, with any variation of taper. And a variety of tips available in 8620, H-13, or Copper Alloy Insert Cup. Shaft or pedestal style rocker arms should be used in conjunction with this series of pushrod because the tube is not case hardened for guide plate use...

The Strongest Pushrods available + Unmatched Customer Service = GoNitrolink.com

Please note: Custom made to your exact specifications. Please call: (916) 425-1427 anytime to order.

Engine , Misc. , Race Cars & Trailers

Donovan Aluminum 565 C.I. Big Block Chevy

Price

Call for Price

Quantity

- +

Total

Call for Price

Information

Add to Wishlist

Donovan Aluminum 565 C.I. Big Block Chevy

Brand new with zero laps!!! And equipped with all the best parts money can buy is exactly what you'll find right here with this Donovan Aluminum 565 C.I. Big Block Chevy that's being sold complete, turn-key and ready for showtime!!! No expense was spared in outfitting this Race Engine with everything needed to be competitive on the race track. And the great news is, it won't cost you anything close to the $50,000 bucks it cost to build it... So let's get to it!!!

About the Engine:

• New Donovan Aluminum 565 C.I. Big Block Chevy
• New Standard Deck, Water Block
• New Dart Pro 1 Cylinder Heads
• New Victory Titanium Intake & Exhaust Valves
• New Wiseco Pistons
• New GRP Aluminum Rods
• New Callies Crankshaft
• New MSD Crank Trigger System
• New Comp Cams Roller Camshaft
• New Isky Roller Lifters
• New Manton Pushrods
• New RCD Gear Drive
• New Jesel Shaft Rockers
• New Williams Valve Covers
• New Edelbrock Low Profile Manifold
• Enderle Birdcatcher
• Enderle Barrel Valve
• Enderle Fuel Pump
• MSD Ignition System
• Custom Zoomie Headers
• New Meziere Billet Flywheel
• New Meziere Heavy Duty Starter
• Dan Olson Custom Oil Pan
• And much more...

Don't miss this opportunity to acquire this turn-key race engine with brand new components for you're very own!!! This complete package is available immediately and sure to save it's new owner thousands of dollars not having duplicate everything here. Then countless hours not having to put it all together from the ground up... Now you're ready to go on tour with the right equipment for the 2026 season!!!

Priced to move at: Only $31K OBO. All serious reasonable offers considered.

Clevite MB-3248VCTL(24) Hemi Lower Main Bearings – Coated

Price

Call for Price

Quantity

- +

Total

Call for Price

Information

Add to Wishlist

"Nitrolink" is you're one-stop shop for all Clevite Engine Bearings!

Clevite MB-3248VCTL(24) Hemi Lower Main Bearings - Coated

These Clevite MB-3248VCTL(24) Hemi Lower Main Bearings - Coated style are sold in a pack of (24) and offer that extra added protection when it's needed most. These are the exact style bearings being used by the majority of the Pro Nitro Top Fuel and Funny Car Teams on tour. They feature Clevites exclusive "TriArmor Coating" the industry's only moly/graphite treatment. A complex blend, in a low-friction polymer base, that offers protection and lubricity second to none. And makes it easier to get a more accurate read on engine performance in between rounds. Designed with enlarged chamfers at the sides for greater crank-fillet clearance. They're manufactured without flash plating for better seating. And can perform especially well on engines that run at medium-to-high revs. They have hardened-steel backings with thin overlays and a high crush factor, plus a medium level of eccentricity. It's easy to see why this style Bearing is the choice of champions!

Racers Discount pricing available! Call: (916) 425-1427 anytime to order.

Bearings available for Hemi, Chevy, or Ford.

Clevite CB-1512VCTL(30) Hemi Lower Rod Bearings – Coated

Price

Call for Price

Quantity

- +

Total

Call for Price

Information

Add to Wishlist

"Nitrolink" is you're one-stop shop for all Clevite Engine Bearings!

Clevite CB-1512VCTL(30) Hemi Lower Rod Bearings - Coated

These Clevite CB-1512VCTL(30) Hemi Lower Rod Bearings - Coated style are sold in a pack of (30) and offer that extra added protection when it's needed most. These are the exact style bearings being used by the majority of the Pro Nitro Top Fuel and Funny Car Teams on tour. They feature Clevites exclusive "TriArmor Coating" the industry's only moly/graphite treatment. A complex blend, in a low-friction polymer base, that offers protection and lubricity second to none. And makes it easier to get a more accurate read on engine performance in between rounds. Designed with enlarged chamfers at the sides for greater crank-fillet clearance. They're manufactured without flash plating for better seating. And can perform especially well on engines that run at medium-to-high revs. They have hardened-steel backings with thin overlays and a high crush factor, plus a medium level of eccentricity. It's easy to see why this style Bearing is the choice of champions!

Racers Discount pricing available! Call: (916) 425-1427 anytime to order.

Bearings available for Hemi, Chevy, or Ford.

Clevite CB-1512VCTU(30) Hemi Upper Rod Bearings – Coated

Price

Call for Price

Quantity

- +

Total

Call for Price

Information