Hemi 392/Rodeck Main Bearing Engine Kits
Attention all racers out there running the popular 392 Hemi... Now you know exactly where to go to get your brand new, hard to find Hemi 392/Rodeck Main Bearing Engine Kits right before the busy race weekend! These are made by King Bearings and are the standard, non-coated style that includes: 1 upper and 1 lower thrust bearing. And 1 complete set of upper and lower main bearings. These kits are sold separately and can be used on 392 nitro, alcohol, or gas engines... Order all your racing consumables 24/7 right here! GoNitrolink.com
We offer a complete line of all Manton Racing Products!
Manton Hemi Intake Rockers
If you're looking for one of the best in the business when it comes to cylinder head components that offer both strength and durability, then look no further! These brand new Manton Hemi Intake Rockers are ready to go to work right out of the box and can be ordered separately or as a complete set. These are the upgraded billet style with the super trick oiler hole by the adjuster and can work with both 426 hemi fuel heads or fat heads. They're the standard 1.7 ratio and ready to accept your 7/16" size adjusters & nuts (sold separately)... Top quality racing components 24/7 right here! GoNitrolink.com
Price: $247.60 each
Price
$179.99 – $239.99Price range: $179.99 through $239.99
Total
$179.99 – $239.99Price range: $179.99 through $239.99
"Nitrolink" offers a complete line of all Enderle Products!
Enderle SBC Front Cover
All you Small Block Chevy racers out there on a budget are sure to appreciate this brand new Enderle SBC Front Cover when it comes to performance and a little nostalgic style! It's made of cast aluminum with built in ears to block off the water pump ports for a finished look. Or if you choose, simply remove them all together. The large crank opening will accommodate a small block crank with a big block snout if desired. Front seal sold separately. Add one of these to your shopping cart right here... Then get your tools ready!
Choose cast aluminum or polished finish in the "options" menu below.
We offer a complete line of all Pit Pal products!
Engine Lift Sling
Nitrolink is excited to offer your race team top quality Pit Pal race trailer accessories for the exact same price as the manufacturer! And if you're running a blower or tunnel ram, then let's get you set up with a brand new Engine Lift Sling just like the one to make that job a whole lot easier! This sling is definitely one nicest on the market and plated for long lasting finish. It has a 1,000 lb. weight capacity and equipped with 4 polyester strap that measure 22" long. Simply hook it to your engine puller and attach the 4 straps to your engine using your header studs or exhaust bolt holes, then pull! It measures 28"W Sling x 27.5" Belt length. Use it once, then wonder how you ever got along without one... Shop here 24/7 for all your Pit Pal needs! GoNitrolink.com
Used 426 Hemi "Core" Camshafts
To help keep all our valued customers on a budget at the racetrack and going rounds, we offer a limited supply of Used 426 Hemi "Core" Camshafts from different manufactures to save you a few bucks not having to buy new elsewhere! Several cam companies offer the service to re-grind your camshaft to your exact specifications for a reasonable charge. So, why not take advantage, get the cam specs you need and have money left over to buy more parts! Helping racers racing budgets go further! GoNitrolink.com
Sold Separately.
Another BRAND NEW item... Without the brand new price!!!
System 1 Oil Filter
Looking out for our valued customers is what we do best! So, lets save you some money right here by offering this brand new System 1 Oil Filter with a nice discount! This one's the inline style, designed to work with either wet sump systems, or installed between the pump and sump tank if you're running a dry sump set-up. The housing is made of 6061-T6 billet aluminum and was intended to be serviced after every run, with the removable 75-micron filter element making it easy to see exactly what's happening inside your engine. This one's set up to works with nitromethane and equipped with the larger AN-20, fitting size on both ends. The filter itself measures 9" long, is anodized red and ready to go racing out of the box! This exact set-up goes for right at $250 bucks... And is the only one available at this price! Save more, Race more, Win more... GoNitrolink.com
Another BRAND NEW item... Without the brand new price!!!
Flatout 426 Hemi Head Gaskets - 4.375
Save GoNitrolink.com to your favorites for money saving deals like these brand new
Flatout 426 Hemi Head Gaskets - 4.375 for all you racers out there running fatheads! These are the copper style, for the 4.375 bore, that are available in .90, .95, .100 or .105 thickness and are ready to ship out right after you order them... It's easy, just click, then they ship!
Choose your thickness in the "options" menu below.
Another BRAND NEW item... Without the brand new price!!!
Darton 4.187 Sleeves
And if you're running a TFX Hemi Billet Block with an .040 over-sized sleeve register, then lets get you set up with these brand new Darton 4.187 Sleeves that are being sold separately... And at a money saving price to help your racing budget go that much further! We have quite a few of these in stock right here, so click, pay and they're on the way! GoNitrolink.com
Other Sleeve Sizes available. Please call: (916) 425-1427 for more details.
We carry a complete line of all Dan Olson Products!
Header Covers
"Nitrolink" offers several different styles of Header Covers to choose from, to help keep unwanted debris out of those pipes while your towing back to your pit area! This brand new set works exceptionally well with your Dan Olson or similar style headers and are made of durable, light weight aluminum so they clean up easily. And they're polished to a brilliant shine so they deliver that clean professional finished look your race team is known for! The standard size offered here is for the 2 1/2" size pipe diameter with a 40° angle. However, custom sizes are also available at a slightly higher rate. Order your set today on our website, then check one more thing off your list!
Sold as a set.
Camshaft Checker Tool
So, how about we streamline your race team a little more with a slightly used Camshaft Checker Tool that's ready to be pressed into service right out of the box! This one works with your 426 Hemi equipped with a .904 lifter bore size only. It's made of light weight aluminum and comes with an easy to read gauge that helps you degree your camshaft by displaying your cam lift. Plus, it's compact size makes it easy to store away nicely in your race trailer or race shop when not in use... Specialty Pit Tools 24/7 right here! GoNitrolink.com
Hemi Sleeve Alignment Tool
How about another super handy pit tool that's sure to make your life a whole lot easier at the race shop, or on race day! Check out this brand new Hemi Sleeve Alignment Tool that's ready for action right out of the box! This one's made of billet aluminum and it's universal design allows it to work with your 4.187" to 4.700" sleeve sizes. It's anodized black and equipped with a long size handle for a precise, proper installation. It works with both the 392 or 426 hemi's and definitely the best choice to help avoid any costly damage to your sleeves during installation... Racers helping Racers do what they do best! GoNitrolink.com
Another BRAND NEW item... Without the brand new price!!!
Clark 426 Hemi Head Gaskets - 4.310
Save GoNitrolink.com to your favorites for money saving deals like these brand new
Clark 426 Hemi Head Gaskets - 4.310 for all you racers out there running fatheads! These are the copper style, for the 4.310 bore, that measure .42 thickness and ready to be pressed into service the minute you say go! Just a couple clicks and they're on the way!
