Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Waterman Wet Sump Oil Pump
Setting the standard for years when it comes to high quality components, Waterman always delivers! And this slightly Used Waterman Wet Sump Oil Pump is no different! This one's your standard gear style, equipped with an extra scavenge and hose included to allow you to pull oil from the cylinder head or block. It has an outside oil pressure adjustment valve and was recently inspected, with both the inside housing and gears showing normal minimal wear. Pump is set up with (2) -12 fittings for your oil filter, (1) -16 fitting for your oil pick-up and (1) -6 fitting for your oil pressure reading. One more left, so come and get it!
Taylor Blower Bag & Restraint
Outfit your ride with this upgraded Taylor Blower Bag & Restraint set-up that's up for grabs today!!! Install or remove it easily on your Nostalgia Nitro Funny Car or Top Fuel Dragster, Blown Alcohol Altered, Supercharged Gas Dragster, Drag Boat, Tractor Puller and so on...
This one's equipped with current cert tags, is in excellent shape and can work with many of the different brands of 6-71 Superchargers on the market. It's the upgraded Top Fuel model that meets the highest SFI 14.3 spec for Blower Restraints. Or, if you're running an alcohol car that requires the lower grade 14.2 Blower Restraint set-up, then you're in luck! Because this one will pass tech for you as well, no problem. The nomex cover and all straps are in nice shape with normal minimal wear. Top Plate is slightly used, in nice condition and free of any stress cracks or damage. And measures the standard 20 1/8" long by 10 5/8" wide. With the Blower opening measuring 10" long by 4 1/2" wide. PLEASE NOTE: Includes everything in the photos. Header Brackets and Pins are not included. So here's your chance to replace that crispy worn out Blower Bag on your race car... And save your team several hundred bucks at the same time by ordering everything right here!
Brand new this exact set-up will run you right at $1,850 bucks without the brackets & pins! But don't even think of spending that much when you can pick this one up right here for a fraction of the cost of new... Quality racing components + Unmatched customer service = GoNitrolink.com
Keith Black 426 Hemi Magnesium Valve Covers
Go with Nitrolink Racing Components for all your hard to find racing parts and accessories! And we'll keep delivering items just like this rare, set of Keith Black 426 Hemi Magnesium Valve Covers to help raise the cool factor on your awesome ride just a little more! This set is made of light weight magnesium, then was dow 7 coated for that signature look. They're slightly used, in very nice shape and free of any damage or repairs and ready to work with your fuel heads equipped with 5/16" size studs. Plus, they're the extremely popular dual plug style, that can also be used if you're only running 8 spark plugs by simply adding a set of removable aluminum block-off caps (sold separately). Includes everything you see in the photos. Plug tubes sold separately. This style valve cover is getting tougher to find out there in this condition and won't last long, so just like on the race track, reaction time will win this set right here! Hard to find racing components taken to the next level right here! GoNitrolink.com
FIE Hemi Magneto & Coil
Recently tested and ready for showtime allows you to buy this slightly used FIE Hemi Magneto & Coil with confidence right here at Nitrolink!!! And if you're running a Nostalgia Top Fuel Dragster, Nostalgia Nitro Funny Car, Blown Altered, Drag Boat, etc; then you're on track to save big time! This 7.86 amp points style magneto, with a CCW rotation was recently tested good to go and not been run since. It's equipped with the popular Dunn style cross-drive, slightly used rotor and brand new cap. The slightly used FIE large size Coil that's also included was recently tested as well and comes with a billet mounting bracket for a quick easy installation. For this exact set-up brand new, expect to pay right at $2300 bucks! But not here... Not today! Save more, race more, win more! Gonitrolink.com
Weld "Aluma-Star" Pro Mod Front Wheels
That awesome polished appearance, along with a money saving price!!! Is exactly what you'll find right here with this next to new set of Weld "Aluma-Star" Pro Mod Front Wheels that are in stock and ready to ship immediately! And if you're running a Pro Mod, Doorslammer, Bracket Car, or Show Car. And are looking to stay within a tight budget, then today's your lucky day...
This set is the standard 15x3.5 size that fits the large Strange suspension style spindles. Both wheels are the one piece billet aluminum current style, with previsions to accept your front disc brakes (not included) if you're running them. They're NHRA "tech friendly" with SFI 15.2 tags included. And both wheels are in very nice shape with slight nicks/scratches from normal use. And a set of center caps, bearing races, bearings, seals and valve stems are also included to complete the package.
Why Buy New??? If you've had a chance to shop around lately for a brand new set of these from Weld Racing, then be prepared to kick down!!! They sell for close to $2500 Bucks a set! But don't even think about spending that much here... Not today!!! Install your tires, then point this set toward the stripe at the other end... Then drop the hammer!
Used Waterman Fuel Pump
Blown Alcohol Dragsters & Funny Cars to the lanes please!!! But, before you tow up... Let's get you set up with this slightly Used Waterman Fuel Pump that's sure to save you a small fortune not having to buy new! This one's the "Lil Bertha" model, set up for alcohol that could work on your Blown Alcohol Dragster, Funny Car, Altered, Drag Boat, Tractor Puller, and so on. It's in very nice shape inside, flows right at 16.9 gallons and includes a flow chart. And loaded with a set of .800 size spur gears, a -10 size 3 way shut-off, a 3/8" size pump shaft, an 1 1/2" size inlet and cable bracket plate that are all ready to go to work! Save, Race, Win, Repeat! GoNitrolink.com
Used System 1 Dry Sump 426 Hemi Oil Pump
One critical component needed to get your race team to the winners circle is to have good oil pressure! So check out this slightly Used System 1 Dry Sump 426 Hemi Oil Pump that's similar to what many of the pro nitro teams on tour are running simply because of their outstanding flow characteristics, versatility and dependability. This one's in great condition inside and set up with a 1.8 and 2.1 gear size that could work well on your Nostalgia Nitro Funny Car, Alcohol Funny Car, Pro Mod, etc. It features you're standard 5/16" size drive and equipped with an AN -4 fitting for functions such as oil pressure gauge, Racepak or other on-board computer sensor, or rear oiling. Plus, two AN -12 IN/OUT fittings for the filter and a stainless hard loop line are included as well...
Personalized Customer Service second to none! GoNitrolink.com
IN STOCK & READY TO SHIP!!!
Used Blower Starter
Here's another quality component for all our valued customers on a budget! And when it comes to "go time" on the starting line, then lets get this slightly Used Blower Starter pressed into service on your team! It's in great shape, free of any damage with normal use and could work with your 36 or 48 volt battery pack. It was recently tested, good to go and equipped with an aluminum cage and hand wheel. And the great news is, this one features the black, universal style anderson plugs that interchanges with any of the other color plugs out there. And this upgraded feature alone could possibly save you on the starting line if you ever need to use another teams battery pack at the last second. So, if you're ready to save BIG TIME not buying new elsewhere! Grab this one up today, right here on our website... Just a couple clicks... Done!
Hilborn 351 Windsor Stack Injector
Let's file this next item in the extremely rare, hard to find vintage category!!! This slightly used Hilborn 351 Windsor Stack Injector is a little different from the parts we generally sell, however if you're a Ford racer looking to make a statement then today's your lucky day! This set fits the Yates SVO, C3 large port cylinder heads. It's in very nice shape and free of any damage or repairs. And equipped with the 2 1/2" size butterflies. It's loaded with a complete set of 7" stacks and a slightly used Hilborn barrel valve and linkage that are also included as well. Both throttle shafts have a secure fit and operate nice and smooth with no binding. And the aluminum valley cover displays the iconic Hilborn name across the top... Visit GoNitrolink.com regularly for more "Vintage Surprises" that are coming soon!!!
Slightly Used
Jesel 426 Hemi Roller Lifters
Been looking for a nice slightly used set of top of the line Jesel 426 Hemi Roller Lifters without having to spend $3,700 Bucks for a new set? Well then you're definitely looking in the right place here!!! This complete set of (8) pair is the larger 1 1/16" lifter bore size. And can work with your TFX, BAE, or Keith Black, cast or billet block. They're equipped with a .37" diameter pin, with the rollers measuring .56" wide. And a 2" spread. All rollers are in nice used condition, with lifter outside surfaces showing normal minimal wear. So if you need a set, here they are... If you have a set, then don't hit the road without spares...
Hi-Performance Products for Less, is what we do Best! GoNitrolink.com
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Alan Johnson Slide Valve
If you're running a larger size fuel system on your nitro burning dragster or funny car, then this slightly Used Alan Johnson Slide Valve is a good option if you're on a tight budget when it comes to fuel management. This ones the stage 1 model, that accepts your -10 size fittings. It's in great shape, made of billet aluminum and works in conjunction with your BDK or AL Valve. Order quality racing components 24 hours, 7 days a week right here!
Alan Johnson 426 Hemi Blower Manifold
Super clean and ready to install right out of the box! Check out this Alan Johnson 426 Hemi Blower Manifold for your nitro, alcohol, or gas burning Dragster, Funny Car, Altered, Drag Boat, or ? This manifold is the .100 tall, 6 bolt style that's slightly used, in great shape and made of light weight magnesium. It free of any damage or repairs and measures right at 6" tall. And has provisions to run port nozzles if you choose. Otherwise, just plug them off. Oil filler inlet location is in the back for easy access (cap not included). And this one's set up to run the standard, large size burst panel in the back (sold separately). However, it can be easily modified to run a burst panel in the front if you choose. The Blower opening at the top is o-ring ready and measures the standard 4 1/4" wide by 15 13/16" long. And this manifold can work with your SSI, Kobelco, Littlefield, PSI, Mooneyham, or Kuhl, 6-71 to 14-71 roots style superchargers. It can be used with your fuel heads made by BAE, or Dart, that are set up for a 6 bolt manifold. As well as any Alan Johnson Stage 5's, 6's, or 7 fuel heads.
PLEASE NOTE: This manifold WILL NOT work if you're running "fatheads" like the A/Fuel cars are running, (such as Brad Stage 3's, 4's, 5's, etc). A brand new manifold just like this one is going to set you back over $3400 Bucks!!! But don't even think about spending that much when you can pick up this super clean set-up right here for a fraction of the cost... Helping your team save big $$$'s is why we're here! GoNitrolink.com
Priced to move at: Only $2495. Or best offer.
