BAE 426 Hemi Fuel Heads
Check out this "complete" set of BAE 426 Hemi Fuel Heads ready for the next Funny Car Chaos event, or your Nostalgia Top Fuel Dragster, Nostalgia Nitro Funny Car, Blown Fuel Altered, Nostalgia A/Fuel, 7.0 Pro, Drag Boat, Tractor Puller and so on. This slightly used set is in great shape and free of any damage or repairs. And works with your standard deck Keith Black, BAE, or TFX Rodeck cast or billet block, using your .100 tall fuel head style manifold. They're the 6 bolt, .100 tall style, loaded with a slightly used set of beadlock groove Manley 2.450 titanium intakes (11/16" stem). And Manley inconel 1.925 exhaust valves (3/8" stem) with Victory titanium retainers and the Manley lash lock system. Plus, a slightly used set of PAC Triple Valve Springs are also included as well. And we'll throw in a complete set of inner head studs, header studs and rocker stand studs to make this deal that much better! Rocker stand dowel pins are the standard 3/8" size and the exhaust flange pattern is also standard and will accommodate most any brand of Hemi fuel head style header, however will not interchange with headers off of fatheads. And as you probably know, your block must be equipped with head studs, not head bolts. And YOU CANNOT RUN WATER thru these heads. The intake ports are o-ring equipped and the cylinder head surfaces are incredibly smooth and in great shape. Combustion chambers have o-rings installed and have never been blown out or burned thru with chambers having very little normal minimal wear. All valve seats and valve guides are in great shape. And this set has provisions to run down nozzles if you choose. They're set up for dual (16 total) spark plugs. However, if your car is set up for 1 plug per cylinder (8 total) no problem... Just plug off 1 hole per cylinder and use your single plug valve covers. Please note: These BAE Fuel Heads are not the "Fatheads" like the A/Fuel Dragsters are running.
Brand new, a loaded set identical to these will set you back right at $10,000 Bucks! But not here... Not today! This set is available immediately and ready to ship out today...
The road to the winners circle may be shorter than you think! GoNitrolink.com
Priced to move at: Only $3895.00
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
IN STOCK & READY TO SHIP!!!
Used Blower Starter
Here's another quality component for all our valued customers on a budget! And when it comes to "go time" on the starting line, then lets get this slightly Used Blower Starter pressed into service on your team! It's in great shape, free of any damage with normal use and could work with your 36 or 48 volt battery pack. It was recently tested, good to go and equipped with an aluminum cage and hand wheel. And the great news is, this one features the black, universal style anderson plugs that interchanges with any of the other color plugs out there. And this upgraded feature alone could possibly save you on the starting line if you ever need to use another teams battery pack at the last second. So, if you're ready to save BIG TIME not buying new elsewhere! Grab this one up today, right here on our website... Just a couple clicks... Done!
MSD Pro Mag 44 Points Box & Coil Kit
Top of the line quality components, at a money saving price is exactly what you'll find right here with this slightly used MSD Pro Mag 44 Points Box & Coil Kit that's sure to help you save both time and money ordering everything all in one place! This kit features a standard MSD #81453 Points Box that's the non-rev style, that connects quickly to your MSD Pro Mag 44 Magneto using a 4 pin Deutsch connector that's already installed. It's black in color, so it matches the MSD #81423 Pro Mag 44 Coil that's also included, for that awesome stealth look! Plus, all the mounting hardware, anti-vibration mounts, etc; are already installed on the funny car style aluminum mounting plate that's also included with the complete package. All components will be tested prior to shipping, so you know your money was well spent here. And get ready to save over $1,400 Buck not having to buy new elsewhere!
Racers helping Racers do what they do best... For Less! GoNitrolink.com
Price
$3,995.00 Original price was: $3,995.00.$3,495.00Current price is: $3,495.00.
Total
$3,995.00 Original price was: $3,995.00.$3,495.00Current price is: $3,495.00.
Used MSD Pro Mag 44 Kit
How about another "Super Saver Deal" right here for all you racers out there on a tight budget looking to save over $3,200 bucks not having to buy new!!!
Check out this slightly Used MSD Pro Mag 44 Kit that's ready to get the job done... And for way less! This one features the popular PN 8130 small cap style Magneto that's currently set up with the clock wise (CW) rotation. However, it can be changed to the hemi rotation easily if you choose. It's equipped with the RCD style drive set-up on the bottom. And also comes complete with a slightly used MSD Pro Mag 44 Points Box (PN 8145) and MSD Pro Mag 44 Red Coil (PN 8142). All items were recently tested and good to go, so you know your money was well spent here. All components are in nice shape, free of any damage or repairs with your common slight cosmetic scratches from normal minimal use. This complete kit is in stock, ready to ship today and definitely ready for showtime!
For this exact set up brand new, expect to pay right at $7,200 bucks! And that's not including the wire set. So, if you're looking to upgrade your existing ignition system, need a spare for race day, or about to start on that new project in the race shop... Then this money saving deal's definitely for you! Helping racers do what they do best... For less! GoNitrolink.com
Turn-Key Race Trailer
If you're looking for a nice, dependable basic style race trailer to get you back and forth to the races without all the expensive bells & whistles, then take a look at the "budget friendly" price on this one...
This Turn-Key Race Trailer is slightly used, in nice shape and outfitted with just the right amount of options to not only keep the cost down. But also offer your race team the "important" tools required to transport your valuable cargo efficiently to the next event. It tows straight, is white in color and ready for your sponsor's logo, lettering, or vinyl wrap if you choose... So let's get to it!!!
About the Trailer...
2014 Continental Cargo 28' Race Trailer
• Usable Floor Space measures: 306" long x 81" wide (between fender wells)
• Rear Door measures: 95.5" wide x 80" tall
• Double Side Doors measures: 77" tall x 46" wide
• Multiple Overhead Aluminum Cabinets
• Drivers Fire Suit/Helmet Cabinet
• Aluminum Work Bench 71" long x 23 1/2" deep
• Roof Air Conditioner
• Tool Boxes
• 12v Interior Lighting & 110V Outlet
• Multiple Floor Tie Down Anchors
• Multiple Side D-Ring Anchors
• Coin Flooring
• Fuel Jug Holder
• Tie Down & Aerosol Can Holders
• Spare Tire Compartment in Floor
• Adjustable Roof Vent
• Fold Down Cable Assist Rear Door
Fold Up Aluminum Ramp 3' long x 80" wide
• Side Door Aluminum Step
• LED Outside Pit Lighting
• Outside 110V Outlet
• Dual Axles
• Custom Aluminum Wheels
• Electric Brake System
• Electric Trailer Jack
• And Much More...
This complete basic style Race Trailer is turn-key, race ready and available immediately. And is sure to save its new owner thousands of dollars from buying new. And countless hours not having to set one up from scratch... Now you're ready to hit the road and join the 2026 season!!!
Priced to move at: Only $18,500 OBO
For more info, or to see in person call Brandon at: (916) 425-1427 anytime!
Used System 1 Dry Sump 426 Hemi Oil Pump
One critical component needed to get your race team to the winners circle is to have good oil pressure! So check out this slightly Used System 1 Dry Sump 426 Hemi Oil Pump that's similar to what many of the pro nitro teams on tour are running simply because of their outstanding flow characteristics, versatility and dependability. This one's in great condition inside and set up with a 1.8 and 2.1 gear size that could work well on your Nostalgia Nitro Funny Car, Alcohol Funny Car, Pro Mod, etc. It features you're standard 5/16" size drive and equipped with an AN -4 fitting for functions such as oil pressure gauge, Racepak or other on-board computer sensor, or rear oiling. Plus, two AN -12 IN/OUT fittings for the filter and a stainless hard loop line are included as well...
Personalized Customer Service second to none! GoNitrolink.com
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Blower Starter Cables
Let's offer some more starting line equipment, to make sure we have you covered on race day! Check out this nice set of Used Blower Starter Cables that are ready to join your race team immediately! This set measures 10 feet long and could work well on the starting line if your using a remote battery pack that sits close to the car. They come complete with a black protective cover to help prevent cable damage. And the great news is, they're also equipped with the black, universal style anderson plugs that interchange with any of the other color plugs out there. And this upgraded feature alone could possibly save you on the starting line if you ever need to use another teams battery pack at the last second. Quality racing components offered 24/7 right here on our website! GoNitrolink.com
Slightly Used
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Racepak -10 Flow Meter
Helping your racing dollars go further is what we do best! And if you've been on the hunt for a slightly used Racepak -10 Flow Meter then get ready to save even more! This one's the aluminum style primarily recommended for nitro applications. It's in great shape with no damage or repairs. And was designed to deliver an accurate fuel flow reading allowing you to closely monitor the performance health (GPM) of your fuel pump. It can also confirm the function of your fuel timers and fuel system lean-outs. Or, it can be used to monitor your hydraulic clutch system flow if you choose. Brand new price is over $1400 bucks, so this budget friendly deal won't last!
When you think high performance turbine-style racing component... Think GoNitrolink.com
RCD Blower Starter
When it comes to "go time" on the starting line, then lets get this awesome looking super clean RCD Blower Starter pressed into service on your race team today! This one's slightly used and in great shape with very little normal minimal wear. It's the late model style, that's outfitted with a billet starter cage that's anodized black for that awesome look! It features the larger current style solenoid, starter switch and upgraded black plug that accepts any of the other color Anderson plugs on your starter cables. And check out the new built in stand on the bottom, to keep it upright to help avoid costly damage from rolling around in your tow vehicle or trailer during transport. All these features included for one great price! We only have one available for now... So, grab this one up right here and keep that extra $500 bucks in your pocket where it belongs not having to buy new elsewhere!
Winning "Starts" Here!!! GoNitrolink.com
Priced to move at: Only $2950.00
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Weld "Aluma-Star" Pro Mod Front Wheels
That awesome polished appearance, along with a money saving price!!! Is exactly what you'll find right here with this next to new set of Weld "Aluma-Star" Pro Mod Front Wheels that are in stock and ready to ship immediately! And if you're running a Pro Mod, Doorslammer, Bracket Car, or Show Car. And are looking to stay within a tight budget, then today's your lucky day...
This set is the standard 15x3.5 size that fits the large Strange suspension style spindles. Both wheels are the one piece billet aluminum current style, with previsions to accept your front disc brakes (not included) if you're running them. They're NHRA "tech friendly" with SFI 15.2 tags included. And both wheels are in very nice shape with slight nicks/scratches from normal use. And a set of center caps, bearing races, bearings, seals and valve stems are also included to complete the package.
Why Buy New??? If you've had a chance to shop around lately for a brand new set of these from Weld Racing, then be prepared to kick down!!! They sell for close to $2500 Bucks a set! But don't even think about spending that much here... Not today!!! Install your tires, then point this set toward the stripe at the other end... Then drop the hammer!
Molinari Titanium Pedal Clutch
Top of the line hi-performance is what you're looking at right here with this state of the art upgraded Molinari Titanium Pedal Clutch that's available immediately and ready to take your clutch program to the next level! This one's the 10.5 size, 6 large stand style, that utilizes 3 disks. It was made by Molinari Racing Products and features an all titanium pressure plate, donut and 426 hemi flywheel. Plus, it's as close to being brand new as you can get, with only 1 race! It's free of any damage or repairs and comes complete with a slightly used set of ARP flywheel bolts and a dial indicator with case that are also included as well. And here's more great news...
1. This one's in stock and ready to ship immediately... Zero wait time!
2. Save almost a "grand" off the new price, buying this one right here!
3. The road to the winners circle is shorter than you think! GoNitrolink.com
Priced to move at only: $9500. + shipping.
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
RCD Valve Cover Breathers
Let's get you set up with this slightly used set of quick disconnect RCD Valve Cover Breathers that are the popular 1 1/4" size. And could work on pretty much any application out there requiring a breather set-up. And what's cool about this set is that they're equipped with the super trick locking pin set-up that helps keep the hose end connectors from twisting loose during competition. And as you can see by the photo's, this set is in almost new condition, free of any cracks, or repairs with very little minimal wear. Mounting plates are the standard pattern as far as these go. And hose ends work with your 1 1/4" diameter hose size. (Hose sold separately.) Brand new price for a pair identical to these will set you back right at $369 Bucks... But not here! Click on the "buy now" button below and start saving! Helping racers do what they do best... For less! GoNitrolink.com
