Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Used Head Stud Nuts
How about a complete set of slightly Used Head Stud Nuts to help you stay within your racing budget this month for a change... This set of (26) total, are the 12 pt. style nuts that work with your 11/16" size socket. And fit your smaller 1/2" fine thread size head studs. Add a can of peanut butter compound to your cart and you're all set for race day!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Kobelco Blower Front Cover
Check out this slightly Used Kobelco Blower Front Cover that's anodized and made of cast aluminum. This one's free of any damage or repairs and comes complete with a front cover bearing and pressure relief valve already installed. If this is your supercharger brand of choice we have a limited supply of items available right here. And once they're gone, they're gone for good!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Magnesium Dual Mag Support
It's durable, light weight and priced to move! This slightly Used Magnesium Dual Mag Support is in nice shape and works with your angled idler assembly. It was designed to lock down and support your dual mag drive and bolts behind your idler plate. The top, made of aluminum does not match the magnesium base. However, it's priced accordingly and sure gives you the opportunity to save!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Mallory Mag Drive
How about another Big Block Chevy quality component that's sure to save you some green!!! Take a look at this slightly Used Mallory Mag Drive for the standard deck block. This one works with your Mallory Super Mag Magnetos and is made of light weight aluminum. It's set up to work with your tach drive and equipped, with the standard pin drive set-up on top. And at this price, it's sure to sell quick. So don't delay... Order today!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Manley Exhaust Valves
See us first when it comes to stocking your race trailer up with the right amount of spare parts for the weekend! And here's a nice set of Used Manley Exhaust Valves with another budget friendly price tag, to hopefully help keep you going rounds on race day! This set of 8 Inconel valves are 1.925 diameter, with a 5.150" length. And are equipped with a 3/8" stem and a .250 tip, with a square groove. They were recently checked for straightness and are free of any visible signs of excessive heat. Just a couple clicks away and we'll handle the rest!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Milodon Swinging Oil Pan Pick-Up
How about this "old school" nice Used Milodon Swinging Oil Pan Pick-Up for all you true vintage racers that want to keep everything period correct! This one's for the 426 hemi, is slightly used and in nice shape and made of cast aluminum. It's ready to accept your two -12 o-ring pick-up fittings (not included) and has been sitting around the shop doing nothing and can't wait to get back to work!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Moroso Dry Sump F/C Oil Tank
If you're getting ready to start on that project in your race shop, or just looking to replace your current tank on your funny car or altered then this next item takes care of both! This nostalgia style Used Moroso Dry Sump F/C Oil Tank is sure to go easy on your check book! It's made of aluminium, anodized black and in good used shape with your common nicks, scratches, etc; from normal use. Tank measurements are: 12" tall in front, by 15" tall in the back, by 16 1/4" tall at its highest point by the cap and is 3 1/2" wide. It's free of any damage or repairs, has a 3 gallon capacity and equipped with inside baffles. Inlets on top and the drain plug bung on the bottom are ready to accept your -12 size fittings and drain plug, (not included) and the suction outlet on the back is the -16 size. Also included is a billet filler cap to wrap up this money saving deal!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used MSD Battery Packs & Charger Kit
Lets save you some money right here with this Used MSD Battery Packs & Charger Kit that helps power up your ignition management such as six shooters, power grid, etc. Each battery delivers 14.4 volts and all three items are in great shape and equipped with Deutsch connectors for a secure fit. This package comes complete with (1) MSD smart charger and (2) battery packs, one for the car and one for a spare. This kit will be sold with a fresh set of batteries, so rest assured your money will be well spent here!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used MSD Big Block Chevy Distributor
Here's one more item our BBC customers can now add to their spare parts inventory... This slightly Used MSD Big Block Chevy Distributor model #8558 is designed to work with your crank trigger system. This one's in great shape, equipped with a billet shaft, bronze gear and a price that's sure to make your wallet happy!
Price
$3,995.00 Original price was: $3,995.00.$3,495.00Current price is: $3,495.00.
Total
$3,995.00 Original price was: $3,995.00.$3,495.00Current price is: $3,495.00.
Used MSD Pro Mag 44 Kit
How about another "Super Saver Deal" right here for all you racers out there on a tight budget looking to save over $3,200 bucks not having to buy new!!!
Check out this slightly Used MSD Pro Mag 44 Kit that's ready to get the job done... And for way less! This one features the popular PN 8130 small cap style Magneto that's currently set up with the clock wise (CW) rotation. However, it can be changed to the hemi rotation easily if you choose. It's equipped with the RCD style drive set-up on the bottom. And also comes complete with a slightly used MSD Pro Mag 44 Points Box (PN 8145) and MSD Pro Mag 44 Red Coil (PN 8142). All items were recently tested and good to go, so you know your money was well spent here. All components are in nice shape, free of any damage or repairs with your common slight cosmetic scratches from normal minimal use. This complete kit is in stock, ready to ship today and definitely ready for showtime!
For this exact set up brand new, expect to pay right at $7,200 bucks! And that's not including the wire set. So, if you're looking to upgrade your existing ignition system, need a spare for race day, or about to start on that new project in the race shop... Then this money saving deal's definitely for you! Helping racers do what they do best... For less! GoNitrolink.com
MAKE OFFER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used MSD Pro Mag 44 Wire Retainer
Here's another popular item for all our valued customers on a budget! This slightly
Used MSD Pro Mag 44 Wire Retainer part #7409 is the perfect item to pair up with the Pro Mag 44 Big Cap. It's one and only job is to keep all wires securely attached to each wire terminal while you break the beams at the other end! It installs easily, removes quickly with mounting hardware included. Order today and save!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Oil Pan Pick-Up
If your looking for a replacement, then this slightly Used Oil Pan Pick-Up is priced to save you a few bucks not having to buy new elsewhere! It's made of aluminum and in great shape with no damage or repairs. And could work with most any brand oil pan that's set up to accommodate a removable style pick-up like this one. It's accepts a -20 fitting size, however can be adapted to the smaller -16 size if you choose. Go with "Nitrolink" as we're always here to help get you ready for race day!
