Ultra-Sturdy Cylinder Head Holder
One more specialty tool right here to help make your job a little easier! This durable Ultra-Sturdy Cylinder Head Holder is one of those items that if you use it once, you'll wonder how you ever managed without it. This one fits most any style cylinder head and holds it securely at a 60° angle, perfect for any type of service. And the 3-piece design utilizes a handy tie rod on one side to help prevent tipping. You're only a couple clicks from having one on the way, so order today!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Battery Pack & Charger
Originally designed, developed and tested by a top fuel racer, this durable style Used Battery Pack & Charger was made Drag Packs... And this one here is in almost brand new condition, with very little track time! It's free of any damage or repairs and equipped with a super handy volt meter read-out that lets you know exactly what to expect on the starting line before you fire up. Or, when it's ready for a recharge. It can also power up your drop light, timing light, jumper cables, etc; using the external posts on the top. The charger plug-in is easily accessible and this quality built pack is ready to jump into action on the front line!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Used Blower Front Cover Bolts
Lets offer a complete set with spares left over of these slightly Used Blower Front Cover Bolts to help keep everything sealed up and performing at its best! This set of (20) total, are the 12 pt. fine thread style bolts that measure 2" long and work with your 5/16" size socket. Save GoNitrolink.com to your favorites for all your specialty hardware needs!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Used Head Stud Nuts
How about a complete set of slightly Used Head Stud Nuts to help you stay within your racing budget this month for a change! This set of (26) total, are the 12 pt. style nuts that work with your 11/16" size socket. And fit your 9/16" fine thread size head studs. Add a can of peanut butter compound to your cart and you're all set for race day!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Used Head Stud Nuts
How about a complete set of slightly Used Head Stud Nuts to help you stay within your racing budget this month for a change... This set of (26) total, are the 12 pt. style nuts that work with your 11/16" size socket. And fit your smaller 1/2" fine thread size head studs. Add a can of peanut butter compound to your cart and you're all set for race day!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Moroso Dry Sump F/C Oil Tank
If you're getting ready to start on that project in your race shop, or just looking to replace your current tank on your funny car or altered then this next item takes care of both! This nostalgia style Used Moroso Dry Sump F/C Oil Tank is sure to go easy on your check book! It's made of aluminium, anodized black and in good used shape with your common nicks, scratches, etc; from normal use. Tank measurements are: 12" tall in front, by 15" tall in the back, by 16 1/4" tall at its highest point by the cap and is 3 1/2" wide. It's free of any damage or repairs, has a 3 gallon capacity and equipped with inside baffles. Inlets on top and the drain plug bung on the bottom are ready to accept your -12 size fittings and drain plug, (not included) and the suction outlet on the back is the -16 size. Also included is a billet filler cap to wrap up this money saving deal!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Oil Pan Pick-Up
If your looking for a replacement, then this slightly Used Oil Pan Pick-Up is priced to save you a few bucks not having to buy new elsewhere! It's made of aluminum and in great shape with no damage or repairs. And could work with most any brand oil pan that's set up to accommodate a removable style pick-up like this one. It's accepts a -20 fitting size, however can be adapted to the smaller -16 size if you choose. Go with "Nitrolink" as we're always here to help get you ready for race day!
Racepak Flow Meters, EGT's, Cables, Pressure & Temp Sensors, Analog Boxes & Much More!!!
We have a large supply of both new and slightly used Racepak parts available for your Pro 2, Pro 1B, Pro 1A, or SC-1000 on-board computer systems. And the great news is, everything listed here on our website is sure to save you quite a few bucks not having to buy new elsewhere! Check this item out...
Used Pro Dash Cover Lens
This slightl Used Pro Dash Cover Lens is a great item to have as a spare and works with your Westco bottom base unit. It was designed to help protect your Racepak Pro 2 dash from fuel and oil spills, dirt, tools, etc. However, it will not work on the Pro 3 dash. It's the perfect item for protecting your investment, so keep that pro dash alive and well! Click, order, done!
MAKE OFFER!!!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Titanium Injector Shaft
Strong, light weight and ready to fly, this upgraded slightly Used Titanium Injector Shaft is designed specifically for all you weight conscience racers out there! This one's in nice shape and measures 20 1/2" long, with a 1/2" diameter. Both ends are equipped with the common 7/16" spline size to accommodate your throttle arms and stops. Expect to pay over $600 bucks for a new one elsewhere! But not here... Not today! Shop right here at GoNitrolink.com for all you're super trick titanium components!
Valve Adjuster Tool
The days of adjusting your valves with a separate allen wrench & box end are over... This light weight heavy duty all in one Valve Adjuster Tool does it all... And it comes in either the 1/2" adjuster nut size for the Fuel Heads. Or the 7/16" size if your running Fat Heads. Both sizes are equipped with the common 3/16" size allen and make it a breeze to run thru a complete set of valves in no time. Pair this handy tool up with one of our Billet Dual Feeler Gauge Handles and show all your race fans out there how it's done correctly!
Valve Cover Breathers & Wiggins Clamps
How about a nice state of the art set of Valve Cover Breathers & Wiggins Clamps that were designed to work with the titanium valve covers we offer here on our website! However, the great news is this set can also work with your application just as well. These are the largest size available that accept your 1 1/2" diameter size hose with the standard pattern mounting plate. And what's cool about this set is they're equipped with the super trick wiggens "clam shell" clamps to help keeps the hose ends from coming loose during competition. These breathers and clamps are the exact set-up that the majority of the top nitro teams are using because of how well they perform, their larger size and how quickly they can be removed. High end racing components taken to the next level! GoNitrolink.com
Valve Lash Adjusting Torque Wrench
How about a high quality precision Valve Lash Adjusting Torque Wrench tool all in one!!! It simplifies precision valve lash settings by properly torquing all adjuster nuts accurately. Preset to 22 lbs, it can be customized up to 26 lbs, and comes complete with the following: 1/8, 5/32, & 3/16" Hex Keys. And it accepts any standard 3/8 drive socket (not included). Take one of these to the race track once... Then wonder how you ever managed without one! GoNitrolink.com for all your specialty pit tool needs!
