"Nitrolink" offers a complete line of all Sander products!
SFI 15.3 Sander 16x16 Beadlock Rear Wheels - Polished
Picture your race car under the lights at night with a brand new set of SFI 15.3 Sander 16x16 Beadlock Rear Wheels - Polished finish. This set is NHRA "tech friendly" with SFI 15.3 tags and can be ordered in either 5 on 5, or the popular 5 on 5.5 bolt pattern. And come with a 4 1/4" offset/backspace. The beadlock rings utilize 24 bolts total on the outside, as well as the inside and are made from billet material and not formed and welded like other rings. Centers are made using the highest quality forged aluminium that produces a product second to none! Order your new set today... Both you and your photographer will be glad you did!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Sander products!
SFI 15.3 Sander 16x16 Beadlock Rear Wheels - Black
If your in the market for a new set of wheels that can perform on the race track just as good as they look! Then check out this brand new set of SFI 15.3 Sander 16x16 Beadlock Rear Wheels - Black anodized for that awesome appearance we just can't get enough of! This set is NHRA "tech friendly" with SFI 15.3 tags and can be ordered in either 5 on 5, or the popular 5 on 5.5 bolt pattern. And come with a 4 1/4" offset/backspace. The beadlock rings utilize 24 bolts total on the outside, as well as the inside and are made from billet material and not formed and welded like other rings. Centers are made using the highest quality forged aluminium that produces a product second to none! If you have any further questions, just give us a call as we're here to help anytime!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
We offers a complete line of all PSI Supercharger products!
PSI Single Mag Drive
Ignition timing is critical when it comes to getting your race car from A to B as quickly and efficiently as possible, right! And that's were this brand new PSI Single Mag Drive comes into play. Probably one of the nicest designs on the market, this one works with your popular Dunn clover leaf style drive on your mags. It's anodized black for that awesome look and sure to offer a well finished, sleek, profiled component that performs just as good as it looks! Outside housing is made of billet aluminum and it comes complete with a bronze gear, oil pump shaft and belt already installed and ready to go to work! Top quality racing components taken to the next level! GoNitrolink.com
We offers a complete line of all PSI Supercharger products!
PSI Dual Mag Drive
Running 2 mags has to be twice the fun, right! But first, we need to make sure both are in sync and working together for optimum performance on race day! And that's were this brand new PSI Dual Mag Drive comes into play. Probably one of the nicest designs on the market, this one works with your popular Dunn clover leaf style drive on your mags. It's anodized black for that awesome look and sure to offer a well finished, sleek, profiled component that performs just as good as it looks! Outside housing is made of billet aluminum and it comes complete with a bronze gear, oil pump shaft and belt already installed and ready to go to work! The best kept secret is out, because now you know exactly where to go for all the cool race parts! GoNitrolink.com
We offers a complete line of all PSI Supercharger products!
PSI Billet Mag Clamp
"Nitrolink" is your one stop shop when it comes to anything PSI! So why not let us help you keep your Magneto locked in place to help insure a consistent tune-up! This PSI Billet Mag Clamp is anodized black and offers quality second to none and installs and removes easily. It's made of light weight billet aluminum and comes complete with all hardware needed to keep your mag from moving during the run. Timing is everything on race day... And timing can't be more perfect to order one right here today!
We offers a complete line of all PSI Supercharger products!
PSI Screw Blower Mini Snout
Now here's an item that's sure to grab the attention of all you racers out there running a screw blower!
This brand new PSI Screw Blower Mini Snout is made of billet aluminum and works with your C, or D, style superchargers only. It's precision cut and o-ring equipped on the inside for a tight seal to prevent leaks. And mounts up to your front cover using 12 bolts to work with your 8, or 11, mm mini snout blower pulleys that attach with 6 bolts total. Inside shaft is heat treated for optimum strength making this high quality PSI performance product ready for battle if you are!
"Nitrolink" offers a complete line of all System 1 products!
System 1 Billet Dry Sump Hemi Oil Pump
Once you tow up, your attention is directed to making sure your race car starts... After that, you better have good oil pressure, right! This System 1 Billet Dry Sump Hemi Oil Pump is the exact same component many of the pro nitro teams on tour are using for several reasons. They're outstanding flow characteristics, versatility and long-term dependability are counted on weekly to keep those 11,000 horsepower engine alive! And could work just as well for your team! They can be set up to work on your "Big Show" Funny Car, Alcohol Funny Car, Pro Mod, etc. And can be ordered in 2 basic sizes, either 1.8 or 2.1 gear sizes. Pump is loaded with you're standard 5/16" size drive and equipped with an AN -8 size o-ring boss port for functions such as oil pressure gauge, Racepak or other on-board computer sensor, or rear oiling. And can be set with two adjustable pressure ranges (80-125 psi “low” and 125-250 psi “high”) and also includes two AN -12 IN/OUT fittings for the filter and stainless hard loop line. Give us a call with any questions as we're here to help anytime!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all System 1 products.
System 1 Billet Wet Sump Hemi Oil Pump
Once you tow up, your attention is directed to making sure your race car starts... After that, you better have good oil pressure, right! This System 1 Billet Wet Sump Hemi Oil Pump is the exact same component many of the pro nitro teams on tour are using for several reasons. They're outstanding flow characteristics, versatility and long-term dependability are counted on weekly to keep those 11,000 horsepower engine alive. And could work just as well for your team! They can be ordered in the following: 1.8, 2.1, 2.4, 2.7, or 3-inch tall gear size, to provide the desired volume (up to 50 GPM) and can be set with adjustable pressure ranges (80-125 psi “low” and 125-250 psi “high”) for virtually every application from fuel injected A/Fuel cars, to nitro-burning supercharged “Big Show” cars. Choose from three different style oil pick-up fittings; AN -16, AN -20, or special AN -16 quick-disconnect fitting for use with System 1’s special scavenging hose. This pump is equipped with an AN -8 size o-ring boss port for functions such as oil pressure gauge, Racepak or other on-board computer sensor, or rear oiling. And also includes two AN -12 IN/OUT fittings for the filter. They're machined for an AN -20 fitting on the scavenge side of the pump (AN -16 to AN -20 fittings available).
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Race Star products!
Race Star Funny Car Front Wheels
If you prefer the black anodized with machined sharp edges look, then do we have the front wheel for you! These brand new forged Race Star Funny Car Front Wheels would look amazing on the front of your race car! These are the 15 x 3.5 lightweight one-piece, 5 spoke design and are available for either anglia or strange (large) spindles. They feature Race Star's "race grip" design, a narrowed bead that helps hold your front tires in place to help prevent slipping on the rims. And center caps are also included as well. Now, can you imagine how cool your ride is going to look pulling up into the starting beams with a set of these!!!
Price: $720.89 per wheel.
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Race Star products!
Race Star Dragster Front Wheels
Just imagine how bad ass your Dragster or Altered is going to look pulling up into the staging beams with a brand new set of these Race Star Dragster Front Wheels. And if you prefer the black anodized with machined sharp edges look, then this style will deliver on both! These are the 17" x 2.4" lightweight one-piece, 5 spoke design and work with your anglia spindles. They feature Race Star's "race grip" design, a narrowed bead that helps hold your front tires in place to help prevent slipping on the rims. And center caps are also included as well. All it takes is a couple clicks on our website to get your brand new set started today!
Price: $824.07 per wheel.
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Weld Racing products!
Weld "Magnum Pro" Beadlock Rear Racing Wheels
That popular iconic style that we all just can't get enough of is found right here in this brand new set of Weld "Magnum Pro" Beadlock Rear Racing Wheels. These are the popular three-piece 16" x 16" size, made of forged 6061-T6 aluminum, specifically designed for optimum weight reduction. They can be ordered with a 5 on 5, or 5 on 5.5 bolt pattern, with a 4" or 5" back space. Beadlock rings are scalloped for less weight and utilize 28 bolts total for a secure grip. Choose either a black anodized center, black beadlock rings and a polished shell, or all polished. These wheels are NHRA "tech friendly" with SFI 15.3 tags and can't wait to join your race team in the winners circle!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Weld Racing products!
Weld "Magnum" Front Funny Car Wheels
Now here's another quality Weld product with an awesome style you won't find anywhere else! These brand new Weld "Magnum" Front Funny Car Wheels are light weight and the one-piece 15" x 3.5" size, made of forged 6061 aluminum. They were specifically designed for optimum weight reduction and can be ordered to work with either anglia or strange (large) spindles in your choice of either a black anodized finish with machined edges, or in a brilliant polished finish, with center caps included as well. These wheels are NHRA "tech friendly" with SFI 15.2 tags and ready to deliver the performance on the race track for you... And that awesome look on the starting line for you're photographer!
Price: $848.00 per wheel.
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
