Alan Johnson 426 Hemi Blower Manifold
Super clean and ready to install right out of the box! Check out this Alan Johnson 426 Hemi Blower Manifold for your nitro, alcohol, or gas burning Dragster, Funny Car, Altered, Drag Boat, or ? This manifold is the .100 tall, 6 bolt style that's slightly used, in great shape and made of light weight magnesium. It free of any damage or repairs and measures right at 6" tall. And has provisions to run port nozzles if you choose. Otherwise, just plug them off. Oil filler inlet location is in the back for easy access (cap not included). And this one's set up to run the standard, large size burst panel in the back (sold separately). However, it can be easily modified to run a burst panel in the front if you choose. The Blower opening at the top is o-ring ready and measures the standard 4 1/4" wide by 15 13/16" long. And this manifold can work with your SSI, Kobelco, Littlefield, PSI, Mooneyham, or Kuhl, 6-71 to 14-71 roots style superchargers. It can be used with your fuel heads made by BAE, or Dart, that are set up for a 6 bolt manifold. As well as any Alan Johnson Stage 5's, 6's, or 7 fuel heads.
PLEASE NOTE: This manifold WILL NOT work if you're running "fatheads" like the A/Fuel cars are running, (such as Brad Stage 3's, 4's, 5's, etc). A brand new manifold just like this one is going to set you back over $3400 Bucks!!! But don't even think about spending that much when you can pick up this super clean set-up right here for a fraction of the cost... Helping your team save big $$$'s is why we're here! GoNitrolink.com
Priced to move at: Only $2495. Or best offer.
"Nitrolink" offers a complete line of all Brad Anderson Racing Products!
BAE Single Plug Hemi Valve Covers
Over the years BAE has been responsible for helping a countless number of race teams find their way to the winners circle! The quality and craftsmanship that goes into every product they manufacture is what's responsible for delivering optimum performance both on and off the race track! And this product right here is just one more example...
Weather you're running 8 plugs or 16, we can help outfit your race car with a brand new set of fat head BAE Single Plug Hemi Valve Covers that are made of light weight magnesium, then dow 7 coated for that super cool look! These are the single plug style, however they are available in the dual plug style as well. They're sold as a pair and have provisions to accept your valve cover breathers and valve cover tubes, (sold separately). Plus, they can be ordered in any of the popular finishes to help you achieve that awesome look you're going for! So if you're looking for a new set of valve covers that are sure to perform on the race track as well as they look, then give us a call anytime and we'll take it from there!
Price: $1495.00 set.
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Gibson-Miller Blower Rear Cover
If you're looking for those hard to find replacement components like this slightly used Gibson-Miller Blower Rear Cover then lets get this one on the way to your race shop quickly... And save you some hard earned cash at the same time! It's in great shape, free of any damage or repairs, is made of light weight magnesium and also includes all the ARP 12pt. mounting hardware needed to get the job done right... Unmatched customer service, right here! GoNitrolink.com
Keith Black 426 Hemi Magnesium Valve Covers
Go with Nitrolink Racing Components for all your hard to find racing parts and accessories! And we'll keep delivering items just like this rare, set of Keith Black 426 Hemi Magnesium Valve Covers to help raise the cool factor on your awesome ride just a little more! This set is made of light weight magnesium, then was dow 7 coated for that signature look. They're slightly used, in very nice shape and free of any damage or repairs and ready to work with your fuel heads equipped with 5/16" size studs. Plus, they're the extremely popular dual plug style, that can also be used if you're only running 8 spark plugs by simply adding a set of removable aluminum block-off caps (sold separately). Includes everything you see in the photos. Plug tubes sold separately. This style valve cover is getting tougher to find out there in this condition and won't last long, so just like on the race track, reaction time will win this set right here! Hard to find racing components taken to the next level right here! GoNitrolink.com
BRAND NEW!!!
Magnesium Blower Snout
Light weight & hard to find are 2 words that best describe this brand new Magnesium Blower Snout that's perfect for all our weight conscious customers out there! And this one's sure to deliver the quality and craftsmanship you've come to expect right here! It's the light weight upgraded magnesium 6 bolt style, that measures 3.9" long. And is in excellent shape, has a nice brilliant shine and has never been down the race track. And it comes complete with a brand new Coupler, Gasket and Hardware..."Supercharged Savings" daily at GoNitrolink.com
One Set Available... Once they're gone, they're gone for good!!!
Original Halibrand Magnesium Rear Wheels
Attention all Cacklefest Racers!!! Get ready to hit the jackpot with these Original Halibrand Magnesium Rear Wheels that are ready to take your classic ride to the next level!!! This may be the last opportunity right here for who knows how long to outfit your Nostalgia Race Car with original, period correct components in this nice of condition... So, on with the show!!!
Made of light weight magnesium, this extremely rare set of rear racing wheels is ready to deliver that classic appearance we all love. They measure the popular 16 x 13 wide, with a 3.6" offset/backspace. Both are in very nice shape and free of any damage, repairs, or unwanted pre-drilled tire screw holes on the outer edges. And the great news is, this set can work with multiple bolt patterns to include 5 on 4 1/2, 5 on 5, or 5 on 5 1/2 so you know your money was well spent here. Valve stems not included. This is the one and only set we have available and as you know, they don't come around very often... More hard to find vintage racing components just like these are on the way!!! So keep checking back... GoNitrolink.com
Offered at: Only $1795.00
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Magnesium Dual Mag Support
It's durable, light weight and priced to move! This slightly Used Magnesium Dual Mag Support is in nice shape and works with your angled idler assembly. It was designed to lock down and support your dual mag drive and bolts behind your idler plate. The top, made of aluminum does not match the magnesium base. However, it's priced accordingly and sure gives you the opportunity to save!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 11mm - 35T - Blower Pulley
How about a slightly Used RCD 11mm - 35T - Blower Pulley that's ready for showtime! This one's an 11mm, 35 tooth, GT style made of light weight magnesium and designed to work with the popular 75, or 84 mm wide blower belts. Pulley measures 3 1/2" wide and could work on most any brand of 4-71, 6-71, 8,10,12, or 14-71 Superchargers on the market. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, Tractor Puller, Pro Street, or Hot Rod and DROP THE HAMMER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 11mm - 50T - Mag - Quick Change Pulley
How about a slightly Used RCD 11mm - 50T - Mag - Quick Change Pulley that's ready for showtime! This one's the GT, center flange model, that works with your quick change style crank hub and nut. It's made of light weight magnesium and designed to work with the popular 75, or 84 mm wide blower belts. And measures the standard 3 1/2" wide. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, or Tractor Puller and DROP THE HAMMER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 11mm - 57T - Mag - Quick Change Pulley
How about a slightly Used RCD 11mm - 57T - Mag - Quick Change Pulley that's ready for showtime! This one's the GT, center flange model, that works with your quick change style crank hub and nut. It's made of light weight magnesium and designed to work with the popular 75, or 84 mm wide blower belts. And measures the standard 3 1/2" wide. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, or Tractor Puller and DROP THE HAMMER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 11mm 36T Mag Blower Pulley
How about a nice Used RCD 11mm 36T Mag Blower Pulley that's ready for showtime! This one's the GT style made of light weight magnesium and designed to work with the popular 75, or 84 mm wide blower belts. Pulley measures 3 1/2" wide and could work on most any brand of 4-71, 6-71, 8,10,12, or 14-71 Superchargers on the market. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, Tractor Puller, Pro Street, or Hot Rod and DROP THE HAMMER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used SSI Blower Front Cover - Magnesium
If your running an SSI or John Force Supercharger and are looking to lighten it up a bit, then check out this slightly Used SSI Blower Front Cover - Magnesium style that's super light weight! It's in very nice shape, free of any damage or repairs and equipped with a pressure relief valve. It requires (12) total 5/16" size bolts (not included) to mount up your blower snout and has provisions for an o-ring inside for a secure seal. Go with "Nitrolink" and take your race team to the next level with all the super trick racing components!
