Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Mallory Mag Drive
How about another Big Block Chevy quality component that's sure to save you some green!!! Take a look at this slightly Used Mallory Mag Drive for the standard deck block. This one works with your Mallory Super Mag Magnetos and is made of light weight aluminum. It's set up to work with your tach drive and equipped, with the standard pin drive set-up on top. And at this price, it's sure to sell quick. So don't delay... Order today!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Sanders Rear Racing Wheel Centers
Now here's a item that would be almost impossible to find at the race track if you needed them for spares! This set of slightly Used Sanders Rear Racing Wheel Centers is in almost new condition with very little use. Both the stud holes and the 15 total mounting bolt holes are in great shape and this set fits the popular 5 on 5.5 bolt pattern. And the great news is they can work on either an SFI 15.3 or 15.4 spec wheel with any offset. And that means if you're running the upgraded drive hub set-up required for NHRA pro competition or the standard hubs, either way this set has you covered! Freshen up that rear set on your race car, or that spare set in your race trailer with a couple clicks right here... Another job done!
Price below is for a set of 2.
We offer a complete line of all Pit Pal products!
Trailer Door Cabinet Organizer
Nitrolink is excited to offer your race team top quality Pit Pal race trailer accessories for the exact same price as the manufacturer! And when optimum efficiency and organization matters, then check out this brand new Trailer Door Cabinet Organizer that's sure to check all the boxes! It's heavy duty, made of durable aluminum, tig welded and designed to last for years. It's equipped with a handy fold down work tray that can hold up to 40 lbs by itself. Plus, it can store up to 20 quarts of oil and 9 aerosol cans up top. And 2 rolls of paper towels on the bottom. Measurements are 25"W x 32"H x 6.75"D. Bottom Shelf 4.5"ID. And it can work just as well in your race shop, or garage... Shop here 24/7 for all your Pit Pal needs! GoNitrolink.com
Other styles & sizes also available.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Do you like this item? And can you put it to work? Call or message us your reasonable offer! And if it make sense, then this item is yours!!!
Used Richmond Pro Gear Set
If you're on the hunt for a slightly Used Richmond Pro Gear Set with a 4.57 ratio then get ready to save some hard earned cash! This one works with your 9" size ford style rear ends and is in great shape with normal minimal wear. The big pinion shaft is the 35 spline 1 1/2" size, with a dual drilled ring gear that works with either your 1/2" or 7/16" size bolts. And the best news is the customer friendly price tag... Click on "buy now" before it's gone!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Manley Exhaust Valves
See us first when it comes to stocking your race trailer up with the right amount of spare parts for the weekend! And here's a nice set of Used Manley Exhaust Valves with another budget friendly price tag, to hopefully help keep you going rounds on race day! This set of 8 Inconel valves are 1.925 diameter, with a 5.150" length. And are equipped with a 3/8" stem and a .250 tip, with a square groove. They were recently checked for straightness and are free of any visible signs of excessive heat. Just a couple clicks away and we'll handle the rest!
Another BRAND NEW item... Without the brand new price!!!
Waterman Fuel Pump Manifold
One more quality component to replenish your spare parts inventory would be this brand new Waterman Fuel Pump Manifold. And if you're running the mega bertha style pump then this is the one for you! This outlet replaces the damaged, leaking, or worn out one on the top of your fuel pump and works with your -12 fittings on top and -8 fittings on the sides. It's anodized black and can't wait to go to work for your race team right out of the box!
Chassis Stabilizer - Rectangular
Here's one of the best ways to protect your investment!!! This brand new Chassis Stabilizer - Rectangular style was designed to help prevent costly chassis damage to your Dragster, Funny Car, Altered, Hot Rod, or any low ground clearance vehicle during transportation to and from the race track by keeping your vehicle stable. It's placed directly under your Race Car, Show Car or Collectible Car prior to transport to help eliminate constant excessive unwanted chassis flex in the trailer. It also helps protect on-board computers, electronics, suspension components, struts, springs, torsion bars, etc. And is highly recommended for all longer wheel base race cars. This one's the smaller 23 1/4" x 7" rectangular style, manufactured from durable rubber. This style works best on applications where the chassis is 1.125" to 3" from the trailer floor. Its sleek design and 1.125" deflated height allows it to slide under the lowest ground clearance vehicles and it inflates to an adjustable maximum height of 4". It comes complete with a 6' hose kit and a gate valve. To operate it, simply slide the deflated stabilizer under the most flexible point in the chassis and inflate it to 15-20 PSI... Quality hi-performance components taken to the next level! GoNitrolink.com
Round 10" lift style also available.
We offer a complete line of all Manton Racing Products!
Manton Hemi Exhaust Rockers
One of the best ways to help prevent costly engine damage starts right here! And If you're looking for one of the strongest durable cylinder head components on the market, then look no further! These brand new Manton Hemi Exhaust Rockers are ready to be pressed into service and can be ordered separately or as a complete set. These are the upgraded billet style with the super trick oiler hole by the adjuster that work with your 426 hemi fuel heads only. They're the standard 1.65 ratio and ready to accept your 7/16" size adjusters & nuts (sold separately)... Save, Race, Win, Repeat! GoNitrolink.com
Price: $273.95 each
RCD Valve Cover Breathers
Let's get you set up with this slightly used set of quick disconnect RCD Valve Cover Breathers that are the popular 1 1/4" size. And could work on pretty much any application out there requiring a breather set-up. And what's cool about this set is that they're equipped with the super trick locking pin set-up that helps keep the hose end connectors from twisting loose during competition. And as you can see by the photo's, this set is in almost new condition, free of any cracks, or repairs with very little minimal wear. Mounting plates are the standard pattern as far as these go. And hose ends work with your 1 1/4" diameter hose size. (Hose sold separately.) Brand new price for a pair identical to these will set you back right at $369 Bucks... But not here! Click on the "buy now" button below and start saving! Helping racers do what they do best... For less! GoNitrolink.com
"Nitrolink" offers a complete line of all Taylor Motorsports Products!
Taylor Reverser Blanket
If you're race car's equipped with a Moore Performance Reverser, then let's set you up with the exact component needed to help your team roll through tech that much quicker! This brand new Taylor Reverser Blanket was specifically designed to fit like a glove. It's light weight, made of kevlar and installs or removes quick and easy. It's equipped with a fresh SFI 4.1 tag, making it NHRA "tech friendly" and the most popular choice of many of the Top Fuel Dragster and Nitro Funny Car teams on tour. If you're looking for a nice clean well fitting product, then you just found it right here! Order quality racing components 24/7 on our website! GoNitrolink.com
We offer a complete line of all Pit Pal products!
Lenco Repair Tray
Nitrolink is excited to offer your race team top quality Pit Pal race trailer accessories for the exact same price as the manufacturer! So, let's get you set up with a brand new Lenco Repair Tray just like the one Lenco uses at their shop! This one's quality crafted from durable heavy aluminum and ready to provide your team years of service. It holds 8+ quarts of fluid and equipped with a handy side tray for bolts and small parts to assure you don't lose anything during service. The pump housing fits in the center hole to allow the transmission to stand on end for easier servicing. And the ATF reservoir keeps your work area clean and neat, with an easy to empty drain plug to make fluid disposal mess free. It measures 18.25"W x 3.25"H x 14.25"D with a 4" Diameter Holder. Use it once, then wonder how you ever got along without one... Shop here 24/7 for all your Pit Pal needs! GoNitrolink.com
Price
$110.95 – $263.95Price range: $110.95 through $263.95
Total
$110.95 – $263.95Price range: $110.95 through $263.95
"Nitrolink" offers a complete line of all Littlefield Products!
Since the mid 70's, Littlefield Blowers has been recognized for being on the cutting-edge in the Supercharger Industry. And, if you're looking for unmatched quality and performance when it comes to Blower Pulleys, then here's your answer!
Any Size - 8mm GT Blower Pulley
Choose Any Size - 8mm GT Blower Pulley you need... And we'll handle the rest!!! All are made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. Pulleys measures 3 1/2" wide and work with most any brand of 4-71, 6-71, 8,10,12, or 14-71 Superchargers on the market.
Choose size needed in the "options" menu below.
