243 ITEMS
Sort
Price: low to high
Another BRAND NEW item... Without the brand new price!!!
Waterman Check Valve
This brand new Waterman Check Valve works with your fuel system and can be set up to open or close at a desired pressure setting. It's in nice shape, free of any damage and works with your -10 size hose. Save time, save money and save the hassle... Order it right here and be done!
Wiggens -12 ORB Kit
Specially offered for the race team that pays extra attention to all the details! This slightly used Wiggens -12 ORB Kit is a super trick way of capping off any application that utilizes a -12 o-ring boss fitting with your existing hose that's equipped with a wiggens hose fitting. This size is most commonly used on the filter side of your oil pump that's already set up for wiggens style clamps on the oil filter hose. This kit comes into play whenever the oil hose is disconnected from the pump by eliminating those annoying drips and mess in your pit area. Simply remove the hose and replace it with this cap and clamp and you're done! Shop here, save money, race often! GoNitrolink.com
Header Bracket Pins
And if we offer the super trick titanium header brackets here at gonitrolink.com then we better off the brand new stainless steel Header Bracket Pins to go with them, right! This is the exact size needed to work with the TAK titanium header brackets. They're precision made, sold separately and ready to hold your restraint straps in place... And look mighty fine doing it!
Dual Feeler Gauge Handles
It's all about choices for our valued customers! So, here's one more style of billet Dual Feeler Gauge Handles to consider if you prefer using the small style that holds 2 separate gauges on the same handle. They're strong, durable and made of billet aluminum to help run thru a set of valves quickly without having to fumble with 2 separate gauges . They measure 3" x 1.25" x .5" total and can accept various sizes of 1/2" wide feeler gauges (not included) depending on your application. They're sold separately and can be stacked 3-4 gauges high if you choose. Ordering made simple, 24/7 right here on our website! GoNitrolink.com
Choose either blue, or red in the "options" menu below.
Billet Dual Feeler Gauge Handle
At "Nitrolink" it's all about choices! So, here's one more Billet Dual Feeler Gauge Handle
if you prefer using the longer style that holds 2 separate gauges on the opposite ends of the handle. They're strong, durable, made of billet aluminum and ready to assist your top end technician when it's time to quickly run thru a set of valves. They measure 5" x 1" x .5" total and can accept various sizes of 1/2" wide feeler gauges depending on your application. And can be stacked 3-4 gauges high if you choose... Specialty pit tools 24/7 right here! GoNitrolink.com
Choose either blue, or red in the "options" menu below.
Sold separately, Gauges not included.
Price
Price range: $49.99 through $62.99
Total
Price range: $49.99 through $62.99
BAE / Keith Black Oil Pan Gaskets
GoNitrolink.com for all your hi performance gaskets and consumables! And if you're weapon of choice happens to be a BAE, or Keith Black block, then you know exactly how to put one of these brand new BAE / Keith Black Oil Pan Gaskets to work! These are made by Mahle and consist of a composite material, with a steel core and teflon coating to help prevent oil saturation. They're NHRA nitro legal, measure .087" thickness and are sold separately. We offer a large selection of all the popular hi performance racing gaskets including cylinder head, exhaust, oil pan, blower and injector gaskets to make sure we have you covered for the weekend!
Choose with cut-out's or no cut-out's in the "options" menu below.
Price
$49.99
Total
$49.99
Heavy Duty Siphon Drum Pump
So, lets make the task of moving race fuel from the drum to your fuel jugs a whole lot easier with this brand new Heavy Duty Siphon Drum Pump to help get you ready for the long race weekend! This one moves approx up to 7 gallons per minute and is equipped with a 33" hose. It's compatible with most fuels, oils and solvents to help make your liquid transfer job quick, clean and easy... Save more, race more, win more! GoNitrolink.com
CAUTION: Not recommended for Alcohol Fuels.
Price
$50.00
Total
$50.00
Nomex F/C - Altered Body Gasket
Attention in the pits!!! Funny Cars & Altereds to the lanes please! And that brings us to this next item specifically designed with you in mind... This Nomex F/C - Altered Body Gasket rides right on top of your bell housing shield and was designed to close up the gap between the shield and the fire wall. This nomex padded panel measures 4" x 24" total and is easily attached with velcro. Install one today, drop that body and send it!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Hadman Front Motor Plate
If you're ordering parts to put a car together then here's a good place to start! This slightly Used Hadman Front Motor Plate is made of 1/4" thick aluminum. It measures 20 1/4" across center to center between notches and works with your 1 1/4" pipe size. We're always happy to help you take your first steps toward the winners circle!
Quick Release Breather Ends
If you're about ready to replace your tired worn out set and looking to save a few bucks at the same time... Then why not do it right here with this brand new set of Quick Release Breather Ends. These are made of billet aluminum, anodized black and work with the 1 3/4" size breathers without o-rings that are equipped with the quick release locking style pull pins. One more brand new product, without the brand new price! GoNitrolink.com
Sold as a set.
"Nitrolink" offers a complete line of all MSD Products!
Dunn Style Drive - Pro Mag 44
High five, to all racers out there that prepare for all the little "what if's" that tend to get in the way over the race weekend! Because it won't be you that doesn't make the call because of some small part you forgot to order. And a perfect example of one of those parts would be this Dunn Style Drive - Pro Mag 44 for the Pro Mag 44 Magneto. This item is definitely the most common drive utilized out there. It's CNC-machined from 1018 steel with a special corrosion resistant coating applied to make this high-performance component ready to help power an 11,000 horsepower race car across the finish line! Comes complete with a new locknut for installation.
Price
$51.99
Total
$51.99
Economy Cylinder Head Holders
If you're a racer on a budget, then "Nitrolink" is always happy to help keep you out there going rounds! So, lets offer a brand new set of Economy Cylinder Head Holders ready to help do just that. These are made of durable steel and designed to hold your cylinder head with either side up. The tapered pins fit any size stud/bolt holes and loosen with a twist. They're perfect for changing valves or springs, or guide knurling, with plenty of clearance to remove arbors and reamers. They're compact and store away quickly and easily in your race shop or trailer. Efficiency counts on race day... So order a set today!
There’s only 2 places you can go to get your “Official Nitrolink Racing Gear” and that would be either in our pit area, or right here on our website!
Check out these awesome looking Nitrolink Racing T-Shirts that are being offered right here before you can even get them at the race track… This first addition design is available at a lower than normal price to help introduce our brand new website and services to all or valued customers! These high quality custom printed shirts are made of 100% cotton and come in black with multi-color printing on both the front and back. Join our winning team today and show everyone you know exactly where to go for high performance nitro and alcohol racing components! GoNitrolink.com
