Racepak Flow Meters, EGT's, Cables, Pressure & Temp Sensors, Analog Boxes & Much More!!!
We have a large supply of both new and slightly used Racepak parts available for your Pro 2, Pro 1B, Pro 1A, or SC-1000 on-board computer systems. And the great news is, everything listed here on our website is sure to save you quite a few bucks not having to buy new elsewhere! Check this item out...
Used Racepak Steering Shaft Sensor
This slightly Used Racepak Steering Shaft Sensor works with the popular Pro 2, Pro 1B, or Pro 1A data loggers. It connects to your 3 pin sensor cable then to your 5V-Out transducer and assists in providing data to your computer to determine if the race car is being over driven on the race track by measuring steering wheel travel. These items for the earlier style Racepak systems are getting tougher to come by, so order while you can because once they're gone, they're gone for good!
Price
$375.00 Original price was: $375.00.$195.00Current price is: $195.00.
Total
$375.00 Original price was: $375.00.$195.00Current price is: $195.00.
Another BRAND NEW item... Without the brand new price!!!
Taylor Blower Manifold Restraint
If you're running an AJ set-back hemi blower manifold and are looking for a brand new Taylor Blower Manifold Restraint then lets save you some money right here! This one's made of silver kevlar and nomex material and designed to work with the newer style round burst panel. It's been sitting around the race shop as a spare, but was never used. It's equipped with SFI 14.5 tags that are expired, however this item is guaranteed to re-cert or your money back. It has also been priced accordingly so buy here today and save!
Price
$390.00 Original price was: $390.00.$195.00Current price is: $195.00.
Total
$390.00 Original price was: $390.00.$195.00Current price is: $195.00.
Another BRAND NEW item... Without the brand new price!!!
New 11mm - 57T - Quick Change Pulley
If you're looking for a New 11mm - 57T - Quick Change Pulley offered at a discounted price, then it's you're lucky day! This one's the GT, center flange model, that works with your quick change style crank hub and nut. It's made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. Pulley is anodized black for the cool visual factor and measures the standard 3 1/2" wide. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, or Tractor Puller and DROP THE HAMMER!!!
We offer a complete line of all Pit Pal products!
Floor Jack Holder
Nitrolink is excited to offer your race team top quality Pit Pal race trailer accessories for the exact same price as the manufacturer! So, let's eliminate the possibility of costly damage to your race car during transport with a brand new Floor Jack Holder like this one to help keep yours safe, secure and out of the way! This one's made of durable .090 tig welded aluminum and equipped with a fully enclosed back and bottom. It measures 17.5"W x 24.25"H x 5.5"D and ready to be pressed into service right out of the box... Shop here 24/7 for all your Pit Pal needs! GoNitrolink.com
Floor Jack not included.
Price
$152.95 – $190.95Price range: $152.95 through $190.95
Total
$152.95 – $190.95Price range: $152.95 through $190.95
Earl's Flame Guard Insulation - 10' Roll
Check out this Earl's Flame Guard Insulation - 10' Roll that's made of a super tough silicone rubber sleeve material to help protect your hose, cables, and wiring from extreme heat and abrasion. It's available in a 10 foot roll and allows you to easily make up the exact lengths needed for your specific application. It's now available in black, (instead of orange) for a much better appearance on your race car and fits easily over your straight fittings and B nuts.
Available in all the sizes below.
-5 straight fittings / -6 B nuts. (I.D. stretch range .600" - .790")
-8 straight fittings / -10 B nuts. (I.D. stretch range .750" - 1.125")
-10 straight fittings / -12 B nuts. (I.D. stretch range 1.062" - 1.400")
Choose size needed in the "options" menu below.
Price
$25.00 – $190.00Price range: $25.00 through $190.00
Total
$25.00 – $190.00Price range: $25.00 through $190.00
Burst Panels - Small
Blower back-fire is always a let down on race day... However, if it does happen we're happy to loose one of these instead of something more expensive, right! So, lets offer a quick easy way to order any amount of these Burst Panels - Small size to keep your race car off the trailer and on the track going rounds... These are the 18, bolt 4 1/4" x 2 3/8" small size panels that are SFI 23.1 tagged and ready to install. Order 1, 5, or 10, because at this price, you can't go wrong!
Cylinder Head Stands
If you're looking to streamline your racing operation, then paying close attention to even the small task challenges usually translates into a productive weekend on the race track! And this handy set of brand new Cylinder Head Stands can certainly help in that department! No bolts, clamps or adapters required with this 2 piece set. Their light weight aluminum construction and slip resistant neoprene covered rails makes this set perfect for use in your pit area. And they're compact size allows them to stow away practically anywhere in your race trailer or back at the shop. Just another "Nitrolink" specialty tool to help keep things running smooth on your team!
Simpson Disinfecting Helmet and Equipment Dryer
Attention all drivers... Keeping your expensive race gear in top condition is key to keeping you comfortable in the drivers seat so you're able to perform at your best. And this brand new Simpson Disinfecting Helmet and Equipment Dryer was developed to do just that! No racer looks forward to putting on a soaking wet, smelly helmet from the last round, however this handy compact unit eliminates that all together... But that's not all! It also comes complete with attachments to dry and sanitize your race gloves and driving shoes as well. This unit plugs into your standard 110v outlet and is equipped with a quick 20 minute ozone feature that cleans and disinfects for a healthier environment. And it provides a safe heat temperature designed specifically for the interiors of rated helmets to prevent mold, and mildew before it starts. It helps condition your helmet liner and cheek pads that degrade over time from perspiration and bacteria by slowing down the process, keeping your equipment in peak condition. Now you can quickly refresh your gear in between rounds, so you're able to focus on one thing... Winning!
Racers helping racers do what they do best! GoNitrolink.com
A NOTE ON OZONE:
Ozone is used widely for sterilizing; this dryer generates ozone by the corona discharge method. Ozone is a pale blue gas with a distinctively pungent smell, detectable by many people at concentrations of as little as 0.01 ppm in air. Ozone is formed naturally from diatomic oxygen by electric discharge or exposure to ultraviolet radiation. Ozone is a powerful oxidant and has many industrial and consumer applications related to oxidation; it is used to deodorize air, purify water, disinfect kitchen tools and treat industrial wastes. Although ozone is widely used in industry and commerce the ozone layer, a portion of the stratosphere, is beneficial: It prevents damaging ultraviolet light from reaching the Earth's surface. This same oxidizing property, however, causes ozone to damage mucous and respiratory tissues, so for safety and comfort purposes, the manufacturer recommends using the dryer and sterilizer in a space with adequate ventilation, and stay away from it while it is disinfecting objects with ozone.
Helmet & Gloves in the photos are also available and sold separately.
Racepak Flow Meters, EGT's, Cables, Pressure & Temp Sensors, Analog Boxes & Much More!!!
We have a large supply of slightly used Racepak parts and accessories available for your Pro 2, Pro 1B, Pro 1A, or SC-1000 on-board computer systems. And the great news is, everything listed here on our website is sure to save you quite a few bucks from buying new! Check this item out...
Used Racepak 300 PSI Transducer
This slightly Used Racepak 300 PSI Transducer works with the popular Pro 2, Pro 1B, or Pro 1A data loggers. It fits in your analog box with your other transducers and is responsible for monitoring oil and fuel pressure, or any other function up to 300 PSI. These items for the earlier style Racepak systems are getting tougher to come by, so order while you can because once they're gone, they're gone for good!
Racepak Flow Meters, EGT's, Cables, Pressure & Temp Sensors, Analog Boxes & Much More!!!
We have a large supply of slightly used Racepak parts and accessories available for your Pro 2, Pro 1B, Pro 1A, or SC-1000 on-board computer systems. And the great news is, everything listed here on our website is sure to save you quite a few bucks from buying new! Check this item out...
Used Racepak 400 PSI Transducer
This slightly Used Racepak 400 PSI Transducer works with the popular Pro 2, Pro 1B, or Pro 1A data loggers. It fits in your analog box with your other transducers and is responsible for monitoring fuel pressure and nozzle pressure, or any other function up to 400 PSI. These items for the earlier style Racepak systems are getting tougher to come by, so order while you can because once they're gone, they're gone for good!
We offer a complete line of all Pit Pal products!
Pit Bike Chock
Nitrolink is excited to offer your race team top quality Pit Pal race trailer accessories for the exact same price as the manufacturer! And when it comes to helping avoid costly damage during transport, then a brand new Pit Bike Chock just like this one is ready to do the job! It's made of durable aluminum and helps secure your pit bike to your trailer floor, or truck bed. It mounts easily and holds up to a 15" diameter / 5" width tire that fits into the cradle. It works in conjunction with your ratchet straps, to anchor the bike to the chock during transport. Chock measures 8.25"W or 20"W including the back cross bar. Inside cradle measures 5 1/16"W total. With outside measuring 19"D including the back cross bar... Shop here 24/7 for all your Pit Pal needs! GoNitrolink.com
Tie Downs not included.
We offer a complete line of all Pit Pal products!
Pro Spark Plug Caddy
Nitrolink is excited to offer your race team top quality Pit Pal race trailer accessories for the exact same price as the manufacturer! So, take a look at this brand new Pro Spark Plug Caddy that's slightly larger and ready for 4 qualifying runs... And 4 elimination rounds! It holds a total of 64 standard or peanut size plugs, made of durable aluminum and equipped with a handle on both sides. It measures: 12"W x 6"H x 10 1/2"D and provides an easy way to keep spark plugs organized for Crew Chiefs to read. Shop here 24/7 for all your Pit Pal needs! GoNitrolink.com
Spark plugs sold separately.
