Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Alan Johnson Slide Valve
If you're running a larger size fuel system on your nitro burning dragster or funny car, then this slightly Used Alan Johnson Slide Valve is a good option if you're on a tight budget when it comes to fuel management. This ones the stage 1 model, that accepts your -10 size fittings. It's in great shape, made of billet aluminum and works in conjunction with your BDK or AL Valve. Order quality racing components 24 hours, 7 days a week right here!
Price
$1,449.95 – $1,499.95Price range: $1,449.95 through $1,499.95
Total
$1,449.95 – $1,499.95Price range: $1,449.95 through $1,499.95
We offer a complete line of all Racepak products!
Here's one more example of how you can race smart by taking full advantage of monitoring one more area of valuable on-track race data!
Racepak Aluminum Flow Meters
In drag racing knowledge creates power... And having access to valuable data during a run helps assist you in knowing exactly how to manage it! And that's exactly what these brand new Racepak Aluminum Flow Meters do best! This high performance turbine-style racing component is the aluminum style primarily recommended for nitro applications. It delivers an accurate fuel flow reading allowing you to closely monitor the performance health (GPM) of your fuel pump and also confirms the function of your fuel timers and fuel system lean-outs. Flow Meters can also be used to monitor your hydraulic clutch system flow if you choose, so you can look at that as well. They're available in three sizes, to work with your -8, or -12 lines. Why not take advantage of all the data you can get to help fast-track your journey to the winners circle! Order yours today!
Choose -8, or -12, in the "options" menu below.
Another BRAND NEW item... Without the brand new price!!!
Moore Performance Drive Shaft Coupler
Here at "Nitrolink" we're all about customer service and getting you to the racetrack for less money! So, here's another brand new item, without the brand new price! This
Moore Performance Drive Shaft Coupler is fresh and ready to install right out of the box. It measures 3.5" OAL. And equipped with 1 3/4" 40, fine splines inside and 2 3/4" 20, course splines outside. Save money, save time, save aggravation... Order here and it's done!
Another BRAND NEW item... Without the brand new price!!!
Strange Pinion Coupler
Another new product without the new price tag!!! How about we set you up with this Strange Pinion Coupler to help keep a few extra bucks in your pocket! This one's made of hardened steel and measures 2.900 overall length and equipped with 2" 40, fine splines inside and 2 3/4" 20, course splines outside. Only 1 available at this price so come and get it!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used AFT Slide Valve - Large
Another budget friendly high performance component would be this slightly Used AFT Slide Valve - Large style, designed for the larger size fuel systems to help with fuel management. This one's ready to accepts your -10 size fittings and is in great shape, made of billet aluminum and works in conjunction with your BDK Valve. Fuel management at a deep discounted price, right here!
Valve Cover Breathers & Wiggins Clamps
How about a nice state of the art set of Valve Cover Breathers & Wiggins Clamps that were designed to work with the titanium valve covers we offer here on our website! However, the great news is this set can also work with your application just as well. These are the largest size available that accept your 1 1/2" diameter size hose with the standard pattern mounting plate. And what's cool about this set is they're equipped with the super trick wiggens "clam shell" clamps to help keeps the hose ends from coming loose during competition. These breathers and clamps are the exact set-up that the majority of the top nitro teams are using because of how well they perform, their larger size and how quickly they can be removed. High end racing components taken to the next level! GoNitrolink.com
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Mallory Mag Drive
How about another Big Block Chevy quality component that's sure to save you some green!!! Take a look at this slightly Used Mallory Mag Drive for the standard deck block. This one works with your Mallory Super Mag Magnetos and is made of light weight aluminum. It's set up to work with your tach drive and equipped, with the standard pin drive set-up on top. And at this price, it's sure to sell quick. So don't delay... Order today!
Price
$70.00 Original price was: $70.00.$45.00Current price is: $45.00.
Total
$70.00 Original price was: $70.00.$45.00Current price is: $45.00.
Racepak Flow Meters, EGT's, Cables, Pressure & Temp Sensors, Analog Boxes & Much More!!!
We have a large supply of both new and slightly used Racepak parts available for your Pro 2, Pro 1B, Pro 1A, or SC-1000 on-board computer systems. And the great news is, everything listed here on our website is sure to save you quite a few bucks not having to buy new elsewhere! Check this item out...
Racepak Non Pass-Thru Analog Box Circuit Board
This brand new Racepak Non Pass-Thru Analog Box Circuit Board works with the popular Pro 2, Pro 1B, or Pro 1A data loggers. It a replacement for the main circuit board in your non pass-thru analog box if it gets damaged. These items for the earlier style Racepak systems are getting tougher to come by, so order while you can because once they're gone, they're gone for good!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Moroso Dry Sump F/C Oil Tank
If you're getting ready to start on that project in your race shop, or just looking to replace your current tank on your funny car or altered then this next item takes care of both! This nostalgia style Used Moroso Dry Sump F/C Oil Tank is sure to go easy on your check book! It's made of aluminium, anodized black and in good used shape with your common nicks, scratches, etc; from normal use. Tank measurements are: 12" tall in front, by 15" tall in the back, by 16 1/4" tall at its highest point by the cap and is 3 1/2" wide. It's free of any damage or repairs, has a 3 gallon capacity and equipped with inside baffles. Inlets on top and the drain plug bung on the bottom are ready to accept your -12 size fittings and drain plug, (not included) and the suction outlet on the back is the -16 size. Also included is a billet filler cap to wrap up this money saving deal!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used AFT Slide Valve - Small
Lets get the job done for a lot less money, with this slightly Used AFT Slide Valve - Small style, designed for the medium size fuel systems to help with fuel management. This one's ready to accepts your -10 size fittings and is in great shape, made of billet aluminum and works in conjunction with your BDK Valve. Save time, save money, GoNitrolink.com!
Racepak Flow Meters, EGT's, Cables, Pressure & Temp Sensors, Analog Boxes & Much More!!!
We have a large supply of both new and slightly used Racepak parts available for your Pro 2, Pro 1B, Pro 1A, or SC-1000 on-board computer systems. And the great news is, everything listed here on our website is sure to save you quite a few bucks not having to buy new elsewhere! Check this item out...
Racepak Programming Cable
This super handy Racepak Programming Cable is brand new and works with the popular Pro 2, Pro 1B, or Pro 1A data loggers. It connects to your PC or laptop using your Racepak PC adaptor, then directly to your data logger. It's responsible for transferring configuration files from your PC to your datalogger. It also allows you to arrange where you want certain functions to appear on your pro dash. It measures 45' long so it can easily extend from your computer inside your race trailer, then to your datalogger on your race car. Racing components taken to the next level! Go "Nitrolink" for all your specialty pit tool needs!
Racepak Flow Meters, EGT's, Cables, Pressure & Temp Sensors, Analog Boxes & Much More!!!
Used Racepak Dash Cable - Pro 3
This slightly Used Racepak Dash Cable - Pro 3 style, measures 144" and works with the new Racepak Pro 3 only. It plugs directly into your Racepak Pro Dash then into the data logger. And is responsible for supplying power and data readings to the Pro 3 dash unit. "Nitrolink" is the best place to shop and save, by not having to buy new elsewhere!
