Price
$145.60 – $151.00Price range: $145.60 through $151.00
Total
$145.60 – $151.00Price range: $145.60 through $151.00
"Nitrolink" offers a complete line of all Brad Anderson Racing Products!
BAE Black Rocker Stands
Over the years BAE has been responsible for helping a countless number of race teams find their way to the winners circle! The quality and craftsmanship that goes into every product they manufacture is what's responsible for delivering optimum performance both on and off the race track! And this product right here is just one more example...
Choose your style... Red, Blue, Silver, or Black! Because if you're a valued "Nitrolink" customer, we'll make sure to offer you all the choices! These brand new BAE Black Rocker Stands are the extreme duty style, available in either hi ratio or standard ratio. They're made of billet aluminum and work with your BAE 4's, 5's, or 6 fat heads or Alan Johnson muscle heads. And the great news is they can be purchased separately, or as a set. They come in 2 variations, oiler style or end stand style and come equipped with steel rocker stud inserts for a secure fit. Ordering right here on our website really is as easy as 1,2,3!!!
Choose end stand style or oiler style in the "options" menu below.
Choose hi ratio or standard ratio in the "options" menu below.
Price
$25.00 – $150.00Price range: $25.00 through $150.00
Total
$25.00 – $150.00Price range: $25.00 through $150.00
Burst Panels - Standard
Blower back-fire is always a let down on race day... However, if it does happen we're happy to loose one of these instead of something more expensive, right! So, let's offer a quick easy way to order any amount of these brand new Burst Panels - Standard size to keep your race car off the trailer and on the track going rounds... These are the 24 bolt, 6 1/4" x 3 1/4" standard size panels that are SFI 23.1 tagged and ready to install. Order 1, 5, or 10, because at this price you can't go wrong!
Another BRAND NEW item... Without the brand new price!!!
System 1 Oil Filter
Looking out for our valued customers is what we do best! So, lets save you some money right here by offering this brand new System 1 Oil Filter with a nice discount! This one's the inline style, designed to work with either wet sump systems, or installed between the pump and sump tank if you're running a dry sump set-up. The housing is made of 6061-T6 billet aluminum and was intended to be serviced after every run, with the removable 75-micron filter element making it easy to see exactly what's happening inside your engine. This one's set up to works with nitromethane and equipped with the larger AN-20, fitting size on both ends. The filter itself measures 9" long, is anodized red and ready to go racing out of the box! This exact set-up goes for right at $250 bucks... And is the only one available at this price! Save more, Race more, Win more... GoNitrolink.com
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD Titanium Quick Change Bottom Pulley Nut
This slightly Used RCD Titanium Quick Change Bottom Pulley Nut is the one item responsible for making the whole process "quick" and easy! This one's in very nice shape and works with the splined style bottom blower pulleys. And allows your team to make a last minute pulley swap in the lanes just before you're ready to fire! It works in conjunction with your RCD threaded style crank hub and can be used with pulley spacers if you choose. It's durable light weight and ready to visit the winners circle!
Another BRAND NEW item... Without the brand new price!!!
Flatout 426 Hemi Head Gaskets - 4.375
Save GoNitrolink.com to your favorites for money saving deals like these brand new
Flatout 426 Hemi Head Gaskets - 4.375 for all you racers out there running fatheads! These are the copper style, for the 4.375 bore, that are available in .90, .95, .100 or .105 thickness and are ready to ship out right after you order them... It's easy, just click, then they ship!
Choose your thickness in the "options" menu below.
Price
$195.00 Original price was: $195.00.$149.95Current price is: $149.95.
Total
$195.00 Original price was: $195.00.$149.95Current price is: $149.95.
Another BRAND NEW item... Without the brand new price!!!
Starter Dog - Fits PSI
Attention all racers out there running a PSI Screw Blower. This brand new small style Starter Dog - Fits PSI Superchargers only and is the exact item needed to help insure there are no unexpected problems at the line when it comes to firing your race car! Keeping your Starter Jaw in good shape not only helps extend the life of your Blower Starter, as a worn out Starter Dog quickly transfers to other key components on your Starter requiring extra down time, extra maintenance and extra expense. This one works specifically with the PSI mini snout using the smaller style pulleys and is equipped with the 1/2" drive for your turn-over bar for adjusting the clutch, finding TDC, adjusting the valves, etc. It's strong durable and made of heat treated billet steel and ready to go to work!
Billet Burst Panel Deflector
Supercharger back-fire is something we all try to avoid at almost any cost... However in the event of one, why not attempt to prevent as much damage as possible, right! And that leads us to this Billet Burst Panel Deflector that installs easily and could possibly help prevent costly body or hood damage! It's durable, light weight and machined from billet aluminum and works with the standard size, 24 bolt burst panel frame. And can be installed to deflect debris or manifold pressure up or down depending on what type of race car you're running. Pair one of these up with a Nomex Plug Wire Saver for a little more added protection... Then drop the hammer!
Bottom End "Diver" Pads
Your Bottom End Crew Member is sure to think it's their birthday after you "gift" them with one of these Bottom End "Diver" Pads.They're comfortable and made of the highest quality marine grade vinyl, making them a breeze to clean up. They measure 52" x 26" and fold up quick and easy for storage practically anywhere in your race trailer or race shop. Quality racing components 24/7 right here! GoNitrolink.com
Sold Separately.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 11mm - 57T - Mag - Quick Change Pulley
How about a slightly Used RCD 11mm - 57T - Mag - Quick Change Pulley that's ready for showtime! This one's the GT, center flange model, that works with your quick change style crank hub and nut. It's made of light weight magnesium and designed to work with the popular 75, or 84 mm wide blower belts. And measures the standard 3 1/2" wide. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, or Tractor Puller and DROP THE HAMMER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 11mm - 50T - Mag - Quick Change Pulley
How about a slightly Used RCD 11mm - 50T - Mag - Quick Change Pulley that's ready for showtime! This one's the GT, center flange model, that works with your quick change style crank hub and nut. It's made of light weight magnesium and designed to work with the popular 75, or 84 mm wide blower belts. And measures the standard 3 1/2" wide. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, or Tractor Puller and DROP THE HAMMER!!!
Dial Indicator Kit for Valve Spring Tester
If you're thinking about purchasing one of the Bench Top Valve Spring Testers we sell, or already have one... Then check out one of these brand new Dial Indicator Kit for Valve Spring Tester that can be easily added for optimum precision accuracy. It's allows you to check your installed height, or coil bind while you're testing for spring pressure without having to do it old school by using a micrometer. It installs quickly with a very small amount of light grease and your 3/16" hex with a 7/16" open end wrench to set the stop. Check out all the other specialty pit tools available right here, designed specifically to make your job that much easier!
Valve Spring Tester (in photo) sold separately.
Racepak Flow Meters, EGT's, Cables, Pressure & Temp Sensors, Analog Boxes & Much More!!!
We have a large supply of slightly used Racepak parts and accessories available for your Pro 2, Pro 1B, Pro 1A, or SC-1000 on-board computer systems. And the great news is, everything listed here on our website is sure to save you quite a few bucks from buying new! Check this item out...
Used Racepak Temp Transducer
This slightly Used Racepak Temp Transducer works with the popular Pro 2, Pro 1B, or Pro 1A data loggers. It fits in your analog box with your other transducers and is responsible for monitoring such functions as cylinder head temp, or intake manifold temp, etc. These items for the earlier style Racepak systems are getting tougher to come by, so order while you can because once they're gone, they're gone for good!
