Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Waterman Wet Sump Oil Pump
Now here's another quality racing component that won't empty your bank account nearly as quick as buying new! This slightly Used Waterman Wet Sump Oil Pump is your standard gear style, equipped with an outside oil pressure adjustment valve. Recently inspected, the inside of the housing is in great shape with the gears showing normal minimal wear. Pump is set up with (2) #12 fittings for your oil filter, (1) #16 fitting for your oil pick-up and (1) #6 fitting for your oil pressure reading. Save BIG $$$'s here, so order today!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Kobelco Blower Front Cover
Check out this slightly Used Kobelco Blower Front Cover that's anodized and made of cast aluminum. This one's free of any damage or repairs and comes complete with a front cover bearing and pressure relief valve already installed. If this is your supercharger brand of choice we have a limited supply of items available right here. And once they're gone, they're gone for good!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Kobelco Front Bearing Plate
If you need one, then here it is! This Used Kobelco Front Bearing Plate is anodized and made of cast aluminum. This hard to find item does show some minimal wear and the bearings should be replaced but if you can't locate one, but need one we will price it accordingly. It utilizes the teflon strip feature for extra added performance and if this is your supercharger brand of choice we have a limited supply of items available right here. And once they're gone, they're gone for good!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used MSD Battery Packs & Charger Kit
Lets save you some money right here with this Used MSD Battery Packs & Charger Kit that helps power up your ignition management such as six shooters, power grid, etc. Each battery delivers 14.4 volts and all three items are in great shape and equipped with Deutsch connectors for a secure fit. This package comes complete with (1) MSD smart charger and (2) battery packs, one for the car and one for a spare. This kit will be sold with a fresh set of batteries, so rest assured your money will be well spent here!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Waterman Wet Sump Oil Pump
Setting the standard for years when it comes to high quality components, Waterman always delivers! And this slightly Used Waterman Wet Sump Oil Pump is no different! This one's your standard gear style, equipped with an extra scavenge and hose included to allow you to pull oil from the cylinder head or block. It has an outside oil pressure adjustment valve and was recently inspected, with both the inside housing and gears showing normal minimal wear. Pump is set up with (2) -12 fittings for your oil filter, (1) -16 fitting for your oil pick-up and (1) -6 fitting for your oil pressure reading. One more left, so come and get it!
Price
$375.00 Original price was: $375.00.$195.00Current price is: $195.00.
Total
$375.00 Original price was: $375.00.$195.00Current price is: $195.00.
Another BRAND NEW item... Without the brand new price!!!
Taylor Blower Manifold Restraint
If you're running an AJ set-back hemi blower manifold and are looking for a brand new Taylor Blower Manifold Restraint then lets save you some money right here! This one's made of silver kevlar and nomex material and designed to work with the newer style round burst panel. It's been sitting around the race shop as a spare, but was never used. It's equipped with SFI 14.5 tags that are expired, however this item is guaranteed to re-cert or your money back. It has also been priced accordingly so buy here today and save!
Digital Torque Wrench Tester
At the race track or back at the race shop, it's critical to be able to reach for a torque wrench that reads accurately every time you use it! Consistency wins races and this brand new Digital Torque Wrench Tester is the exact item needed to keep tabs on how consistent your torque wrench calibration is reading and when it's time to send out for service. This handy tool accommodates your 1/2" drive torque wrenches and has a push button conversion foot pounds to inches mode and a peak hold feature that saves your maximum reading. It's equipped with a back lit read out screen for night use and powers up using one standard 9-volt battery. Now you know where to go for all your specialty pit tools... Nitrolink!
Price: $695.00
Please call: (916) 425-1427 anytime to order.
"Nitrolink" offers a complete line of all Triple-T Race Products!
For over 25 years Triple T Race Products has been on the front line providing top quality pit area and race shop equipment second to none. They continue to supply the majority of the biggest name teams in both top fuel and nitro funny car with products that are put to the test under the harshest conditions every weekend. And continue to meet or exceed those expectations consistently! Check out the following quality product sure to deliver both unmatched service and a professional image your race team deserves...
Engine Lift Bars - Triple-T
Here they are!!! The #1 selling style of Engine Lift Bars - Triple-T on the market! This is the exact set you see on TV that the biggest name teams in drag racing reach for when it's time to do an engine swap. It takes a low center of gravity for easy lifting and this brand new set was specifically designed with that in mind and they're quick and simple to use and remove. With your cylinder heads off, slide them down over 2 head studs per side, run down a couple head stud nuts and you're done. We're happy to help anytime with all your specialty pit tool needs! GoNitrolink.com
"Nitrolink" offers a complete line of all Triple-T Race Products!
For over 25 years Triple T Race Products has been on the front line providing top quality pit area and race shop equipment second to none. They continue to supply the majority of the biggest name teams in both top fuel and nitro funny car with products that are put to the test under the harshest conditions every weekend. And continue to meet or exceed those expectations consistently! Check out the following quality product sure to deliver both unmatched service and a professional image your race team deserves...
Pro Clutch Tray - Triple-T
Attention all Rear Engine Dragster teams! This brand new Pro Clutch Tray - Triple-T was designed to mount directly to your rear wing struts for quick easy access to the tools needed to service the clutch. It's durable, made of light weight aluminum and can be ordered with a natural finish, or powdercoated black for that super cool look! It's equipped with 3 divided sections in front to accommodate nuts, bolts, sockets, etc. And plenty of individual dividers to hold the specific tools needed to get the job done right. We're happy to help anytime with all your specialty pit tool needs! GoNitrolink.com
Price: $525.00 - $575.00 each.
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Triple-T Race Products!
For over 25 years Triple T Race Products has been on the front line providing top quality pit area and race shop equipment second to none. They continue to supply the majority of the biggest name teams in both top fuel and nitro funny car with products that are put to the test under the harshest conditions every weekend. And continue to meet or exceed those expectations consistently! Check out the following quality product sure to deliver both unmatched service and a professional image your race team deserves...
Crank Gear Puller Tools - Triple-T
Use one of these handy Crank Gear Puller Tools - Triple-T once and wonder how you ever got along without it! Designed to remove your crank gear safely and efficiently this brand new high quality tool is made to last. It's steel construction is ready to make short work of this task every time you reach for it! We're happy to help anytime with all your specialty pit tool needs! GoNitrolink.com
Price: $295.00 each.
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Triple-T Race Products!
For over 25 years Triple T Race Products has been on the front line providing top quality pit area and race shop equipment second to none. They continue to supply the majority of the biggest name teams in both top fuel and nitro funny car with products that are put to the test under the harshest conditions every weekend. And continue to meet or exceed those expectations consistently! Check out the following quality product sure to deliver both unmatched service and a professional image your race team deserves...
Top Fuel - A/Fuel Headers - Triple-T
Introduced in 1994, this exact style of Top Fuel - A/Fuel Headers - Triple-T has been setting records and winning championships ever since! Equipped with EGT bungs and ready to accept your computer probes. This style header has been extensively tested over the years and developed with all the support gussets, braces and support rods needed to withstand the extreme blast of 11,000 horsepower, then be ready for next round! They can be ordered in either 2 1/2", or 2 3/4" diameter. So, give us a call and we'll be happy to get your new set started today!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Price
$50.00 – $75.00Price range: $50.00 through $75.00
Total
$50.00 – $75.00Price range: $50.00 through $75.00
"Nitrolink" offers a complete line of all Triple-T Race Products!
For over 25 years Triple T Race Products has been on the front line providing top quality pit area and race shop equipment second to none. They continue to supply the majority of the biggest name teams in both top fuel and nitro funny car with products that are put to the test under the harshest conditions every weekend. And continue to meet or exceed those expectations consistently! Check out the following quality product sure to deliver both unmatched service and a professional image your race team deserves...
Blower Opening Cover - Triple-T
How about a brand new Blower Opening Cover - Triple-T that's made of light weight aluminum and designed to keep out dust and debris while your supercharger sits quietly in your race trailer waiting to go to work! We're happy to help anytime with all your specialty pit tool needs! GoNitrolink.com
Choose either black anodized, or natural finish in the options menu below.
