Price
$390.00 Original price was: $390.00.$195.00Current price is: $195.00.
Total
$390.00 Original price was: $390.00.$195.00Current price is: $195.00.
Another BRAND NEW item... Without the brand new price!!!
New 11mm - 57T - Quick Change Pulley
If you're looking for a New 11mm - 57T - Quick Change Pulley offered at a discounted price, then it's you're lucky day! This one's the GT, center flange model, that works with your quick change style crank hub and nut. It's made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. Pulley is anodized black for the cool visual factor and measures the standard 3 1/2" wide. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, or Tractor Puller and DROP THE HAMMER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 11mm - 50T - Quick Change Pulley
How about a slightly Used RCD 11mm - 50T - Quick Change Pulley that's ready for showtime! This one's the GT, center flange model, that works with your quick change style crank hub and nut. It's made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. And measures the standard 3 1/2" wide. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, or Tractor Puller and DROP THE HAMMER!!!
"Nitrolink" offers a complete line of all System 1 products.
System 1 Billet Wet Sump Hemi Oil Pump
Once you tow up, your attention is directed to making sure your race car starts... After that, you better have good oil pressure, right! This System 1 Billet Wet Sump Hemi Oil Pump is the exact same component many of the pro nitro teams on tour are using for several reasons. They're outstanding flow characteristics, versatility and long-term dependability are counted on weekly to keep those 11,000 horsepower engine alive. And could work just as well for your team! They can be ordered in the following: 1.8, 2.1, 2.4, 2.7, or 3-inch tall gear size, to provide the desired volume (up to 50 GPM) and can be set with adjustable pressure ranges (80-125 psi “low” and 125-250 psi “high”) for virtually every application from fuel injected A/Fuel cars, to nitro-burning supercharged “Big Show” cars. Choose from three different style oil pick-up fittings; AN -16, AN -20, or special AN -16 quick-disconnect fitting for use with System 1’s special scavenging hose. This pump is equipped with an AN -8 size o-ring boss port for functions such as oil pressure gauge, Racepak or other on-board computer sensor, or rear oiling. And also includes two AN -12 IN/OUT fittings for the filter. They're machined for an AN -20 fitting on the scavenge side of the pump (AN -16 to AN -20 fittings available).
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all System 1 products!
System 1 Billet Dry Sump Hemi Oil Pump
Once you tow up, your attention is directed to making sure your race car starts... After that, you better have good oil pressure, right! This System 1 Billet Dry Sump Hemi Oil Pump is the exact same component many of the pro nitro teams on tour are using for several reasons. They're outstanding flow characteristics, versatility and long-term dependability are counted on weekly to keep those 11,000 horsepower engine alive! And could work just as well for your team! They can be set up to work on your "Big Show" Funny Car, Alcohol Funny Car, Pro Mod, etc. And can be ordered in 2 basic sizes, either 1.8 or 2.1 gear sizes. Pump is loaded with you're standard 5/16" size drive and equipped with an AN -8 size o-ring boss port for functions such as oil pressure gauge, Racepak or other on-board computer sensor, or rear oiling. And can be set with two adjustable pressure ranges (80-125 psi “low” and 125-250 psi “high”) and also includes two AN -12 IN/OUT fittings for the filter and stainless hard loop line. Give us a call with any questions as we're here to help anytime!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
We offers a complete line of all PSI Supercharger products!
PSI Screw Blower Mini Snout
Now here's an item that's sure to grab the attention of all you racers out there running a screw blower!
This brand new PSI Screw Blower Mini Snout is made of billet aluminum and works with your C, or D, style superchargers only. It's precision cut and o-ring equipped on the inside for a tight seal to prevent leaks. And mounts up to your front cover using 12 bolts to work with your 8, or 11, mm mini snout blower pulleys that attach with 6 bolts total. Inside shaft is heat treated for optimum strength making this high quality PSI performance product ready for battle if you are!
Price
$439.95 – $598.95Price range: $439.95 through $598.95
Total
$439.95 – $598.95Price range: $439.95 through $598.95
"Nitrolink" offers a complete line of all Littlefield Products.
Littlefield Polished Blower Snouts
When it comes to blower components, it's not always a smart move to go with the least expensive brands available. Because on the race track, horsepower always finds the weakest parts, right! So lets offer top of the line quality at a fair price right here with these
Littlefield Polished Blower Snouts. Made of aircraft-grade billet aluminum and available in a variety of sizes sure to fit your specific application, these premium snouts are available in 3 7/8", 5 1/8", 6", 7" and 8 5/8" lengths. They're loaded with a double-ball bearing and equipped with premium oil seals. The shaft is made from 4100 heat-treated steel delivering one of the strongest and most reliable on the market. These high performance blower snouts have consistently proven themselves over the years that they can stand up to the most demanding racing conditions, then be ready for the next round!
Choose Snout Length needed in the "options" menu below.
We offers a complete line of all PSI Supercharger products!
PSI Billet Mag Clamp
"Nitrolink" is your one stop shop when it comes to anything PSI! So why not let us help you keep your Magneto locked in place to help insure a consistent tune-up! This PSI Billet Mag Clamp is anodized black and offers quality second to none and installs and removes easily. It's made of light weight billet aluminum and comes complete with all hardware needed to keep your mag from moving during the run. Timing is everything on race day... And timing can't be more perfect to order one right here today!
We offers a complete line of all PSI Supercharger products!
PSI Dual Mag Drive
Running 2 mags has to be twice the fun, right! But first, we need to make sure both are in sync and working together for optimum performance on race day! And that's were this brand new PSI Dual Mag Drive comes into play. Probably one of the nicest designs on the market, this one works with your popular Dunn clover leaf style drive on your mags. It's anodized black for that awesome look and sure to offer a well finished, sleek, profiled component that performs just as good as it looks! Outside housing is made of billet aluminum and it comes complete with a bronze gear, oil pump shaft and belt already installed and ready to go to work! The best kept secret is out, because now you know exactly where to go for all the cool race parts! GoNitrolink.com
We offers a complete line of all PSI Supercharger products!
PSI Single Mag Drive
Ignition timing is critical when it comes to getting your race car from A to B as quickly and efficiently as possible, right! And that's were this brand new PSI Single Mag Drive comes into play. Probably one of the nicest designs on the market, this one works with your popular Dunn clover leaf style drive on your mags. It's anodized black for that awesome look and sure to offer a well finished, sleek, profiled component that performs just as good as it looks! Outside housing is made of billet aluminum and it comes complete with a bronze gear, oil pump shaft and belt already installed and ready to go to work! Top quality racing components taken to the next level! GoNitrolink.com
"Nitrolink" offers a complete line of all System 1 products!
System 1 Inline Fuel Filters
The distance between your fuel tank and the injector is not always as clean as it needs to be... This problem can cause a wide range of issues including lean cylinders, fuel pump, or barrel valve damage, and so on! So, lets offer a wide variety of brand new System 1 Inline Fuel Filters to fit your specific race application. This quality component can be ordered to work with nitro, alcohol, or gas. And is offered in either a 2 inch, or 2 1/4 inch diameter, with a length choice of 6, 9, or 11, inches long. The removable filter element makes it easy to service in between rounds and see exactly what's not going into your fuel system. Yours can be assembled with either a 35-micron filter, excellent for use in high fuel demand carbureted applications and nominally flows 24 GPM. Or, the 75-micron filter that's ideal for use between the pump and barrel valve. Set up with your choice of AN -6, AN -8, AN -10, or AN -12 fittings. And available in either red or black. Order yours today!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Price
$346.00 – $366.00Price range: $346.00 through $366.00
Total
$346.00 – $366.00Price range: $346.00 through $366.00
"Nitrolink" offers a complete line of all System 1 products!
System 1 Pro Series Spin-On Oil Filter
Unmatched quality and craftsmanship second to none! You're looking at one of, if not the best oil filtration set-up's on the market!!! This brand new System 1 Pro Series Spin-On Oil Filter is made of billet aluminum and can be used on supercharged, nitro-burning, injected nitro, supercharged alcohol, or gas applications. It's anodized black for that cool stealth look, with a reusable filter element inside that can easily be inspected or serviced by simply removing the inspection cap. It's equipped with the correct 75-micron element for use with heavy weight oil. Or, can be ordered with a 45-micron element if you're running a lighter weight oil. And o-rings are also included. Another quality product to add to your race team!
Choose your element size & fuel application in "options" menu below.
Price
$538.00 – $547.00Price range: $538.00 through $547.00
Total
$538.00 – $547.00Price range: $538.00 through $547.00
"Nitrolink" offers a complete line of all System 1 products!
System 1 Pro Series Oil Filter & Mount
Unmatched quality and craftsmanship second to none! You're looking at one of, if not the best oil filtration set-up's on the market!!! This combination System 1 Pro Series Oil Filter & Mount is made of billet aluminum and NHRA approved for Top Fuel and Nitro Funny Car competition. Or, available for Top Alcohol Dragsters, Funny Cars, Pro Mod, etc. It's anodized black for that cool stealth look. And was designed with the filter canister housing and mount permanently affixed as one unit. The reusable filter element inside can be easily inspected, or serviced by simply removing the inspection cap. And it's equipped with the correct 75-micron element for use with heavy weight oil. The mount has two 5/16 -18 threaded holes on a 2” center and two AN -12 fittings on top. Order one today... And the problem goes away!
Choose your fuel application in "options" menu below.
