Price
$99.95 – $155.95Price range: $99.95 through $155.95
Total
$99.95 – $155.95Price range: $99.95 through $155.95
"Nitrolink" offers a complete line of all Littlefield Products!
Since the mid 70's, Littlefield Blowers has been recognized for being on the cutting-edge in the Supercharger Industry. And, if you're looking for unmatched quality and performance when it comes to Blower Pulleys, then here's your answer!
Any Size - 1/2" Pitch HTD Blower Pulley
Choose Any Size - 1/2" Pitch HTD Blower Pulley you need... And we'll handle the rest!!! All are made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. Pulleys measures 3 1/2" wide and work with most any brand of 4-71, 6-71, 8,10,12, or 14-71 Superchargers on the market.
Choose size needed in the "options" menu below.
Rod Cap Rack
How about a handy Rod Cap Rack for the bottom end to keep your Rod Caps clean and organized while servicing your Pistons and Rods. Made from the same quality materials that go into all the other Racks we offer. This one's sure to prove it's value after the first test drive! Just another small detail to give your team the professional look it deserves! GoNitrolink.com for all your specialty pit tool needs!
Main Cap Puller
Definitely one of the nicest heavy duty Slide Hammers on the market today! This Main Cap Puller is anodized black and ready for showtime!!! Your bottom end guy is sure to appreciate being able to drop those Main Caps with this super efficient, high quality tool... This one was specifically designed to deliver a far better result compared to some of the other lighter duty styles on the market. Use this style once, and wonder how you ever got along without it! It's available in 5/16", 3/8", or 7/16" thread size. And works with your TFX, BAE, or Keith Black standard or 3" Main Caps. Order here, save money, race more often! GoNitrolink.com
Choose either 5/16", 3/8", or 7/16" thread size in the options menu below.
We offer a complete line of all Lenco products!
Billet Drive Shaft Cover
When unmatched quality and craftsmanship is what you're looking for, then check out this brand new Billet Drive Shaft Cover that's ready to offer that and a whole lot more! This one's made by Lenco and set up to work with either the CS-1, or CS-2 style transmission. It's anodized black for that awesome look with the complete unit measuring 8" long including the flange. The tube cover itself measures 6" long and has a 3" inside diameter. It can be installed or removed quick and easy in your front engine dragster, funny car, altered, etc; in between rounds on race day. And includes the transmission flange, driveshaft cover, stainless clamp with safety pin and transmission housing rear seal... And don't forget about the unmatched customer service! GoNitrolink.com
Please choose your Output Shaft size (32 Spline or 35 Spline) in the "Options" menu below.
Rod Cap & Bearing Holder
As you know, organization has always been key to a successful race weekend! So, lets get your race team set up with a brand new Rod Cap & Bearing Holder like this one to make inspection in between rounds quick and easy! This professionally made, high quality rack holds all your rod caps and rod bearings together securely. And it's clearly marked so you know exactly what cap and bearing went where. It's made of durable aluminum, cleans up easily after use and it's compact size (5 3/4"W x 12 9/16"L x 1 1/2"H) stores away nicely in your race trailer or at your race shop when not in use. Specialty pit tools, racks and a whole lot more! GoNitrolink.com
Air Tank & Tire Gauge Kit
Setting tire pressure in the lanes right before you send it just became a whole lot easier with this brand new all in one Air Tank & Tire Gauge Kit that's ready to provide everything needed right at your fingertips! No more dragging air lines around the car in your pit area, as this kit offers a light weight polished aluminum tank. And a 0-60 psi digital tire gauge that's back-lit for night racing. This style has the 5 gallon size tank that measures approx 15x13 with the standard 125 psi maximum pressure capacity. It's equipped with an analog filler gauge on the top and rubber feet on the bottom. And it's exclusive special design inlet valve makes fill up's a breeze, in 15 seconds or less. The digital tire pressure gauge measures 2 1/2" in diameter and is equipped with an air pressure release button for quick, accurate tire pressure adjustments. And it works with a 17" hose with a swivel angle chuck on one end. And air trigger with 4 feet of air hose ready to provide plenty of length to work with on the other. Also included is a tire gauge holder bracket on the tank and an alternate swivel ball chuck if you need it... Specialty pit tools, consumables and unmatched customer service right here! GoNitrolink.com
"Head on Engine" Valve Spring Tester/Remover - Fuel Heads
How much valuable time would you save in between rounds if you didn't have to remove your injector, supercharger, intake manifold and cylinder heads just to test or replace valve springs? Check out this brand new, state of the art "Head on Engine" Valve Spring Tester/Remover - Fuel Heads that was specifically designed to do just that! This 426 hemi valve spring maintenance tool can be ordered to work with either double or triple valve springs. And it comes with everything needed to test and or remove valve springs with all the components mentioned above still on the engine... How cool is that!!! On race day, this could be a real game changer right here! When ordering, please specify what rocker arms and stands you're running and we'll take it from there... Race, Win, Repeat! GoNitrolink.com
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
We offer a complete line of all Pit Pal products!
Pro-Jack Storage Holder
Nitrolink is excited to offer your race team top quality Pit Pal race trailer accessories for the exact same price as the manufacturer! So, check out this brand new Pro-Jack Storage Holder that's sure to help keep your expensive set of race car lifts safe and secure during transport. It's made of aluminum, installs easily right out of the box and holds both the front and rear jacks to help keep your race trailer organized and ready for showtime! And it's equipped with holes on both sides that accept your tie downs or bungee cords for an even more secure fit... Pro-Jacks (in photo) sold separately. Racers helping Racers do what they do best. GoNitrolink.com
Front pouch measures: 25.5"W x 14.5"H x 3.5"D
Rear Pouch measures: 25.5"W x 17.5"H x 3"D
Dimensions: 27.5"W x 24"H x 7.5"D
Inner Dimensions of each pouch: 25"W x 3"D
Please Note: Because the sizes of Pro-Jacks vary so extensively, we want to be sure we fit you with the Pro-Jack Holder that suits your needs. This style fits only the Pro-Jack brand. If you own a different brand, please check the above measurements to confirm your jacks will fit this holder.
We offer a complete line of all Pit Pal products!
Lenco Repair Tray
Nitrolink is excited to offer your race team top quality Pit Pal race trailer accessories for the exact same price as the manufacturer! So, let's get you set up with a brand new Lenco Repair Tray just like the one Lenco uses at their shop! This one's quality crafted from durable heavy aluminum and ready to provide your team years of service. It holds 8+ quarts of fluid and equipped with a handy side tray for bolts and small parts to assure you don't lose anything during service. The pump housing fits in the center hole to allow the transmission to stand on end for easier servicing. And the ATF reservoir keeps your work area clean and neat, with an easy to empty drain plug to make fluid disposal mess free. It measures 18.25"W x 3.25"H x 14.25"D with a 4" Diameter Holder. Use it once, then wonder how you ever got along without one... Shop here 24/7 for all your Pit Pal needs! GoNitrolink.com
We offer a complete line of all Pit Pal products!
Engine Lift Sling
Nitrolink is excited to offer your race team top quality Pit Pal race trailer accessories for the exact same price as the manufacturer! And if you're running a blower or tunnel ram, then let's get you set up with a brand new Engine Lift Sling just like the one to make that job a whole lot easier! This sling is definitely one nicest on the market and plated for long lasting finish. It has a 1,000 lb. weight capacity and equipped with 4 polyester strap that measure 22" long. Simply hook it to your engine puller and attach the 4 straps to your engine using your header studs or exhaust bolt holes, then pull! It measures 28"W Sling x 27.5" Belt length. Use it once, then wonder how you ever got along without one... Shop here 24/7 for all your Pit Pal needs! GoNitrolink.com
Official Nitrolink Racing Leather Sleeve Jackets
There's only 2 places you can go to get your "Official Nitrolink Racing Gear" and that would be either in our pit area, or right here on our website!
You won't be disappointed with the quality and style of these Official Nitrolink Racing Leather Sleeve Jackets that are being offered right here before you can even get them at the race track... These custom embroidered top of the line heavy jackets are the "real deal" and not the common less expensive lighter style we're all familiar with. They're made in the U.S. and perfect for those cool winter nights waiting in the staging lanes. They offer a black wool body, genuine leather black sleeves, outside pockets, pleated lining and an inside pocket. And include your choice of either the Dragster or Funny Car logo stitched on the front. And they're available in all the popular sizes. With proper care, these comfortable high quality jackets will last for years... Join our winning team today and show everyone you know exactly where to go for high performance nitro and alcohol racing components! GoNitrolink.com
Choose either Dragster or Funny Car logo and size in the "options" menu below.
Have a sizing questions? Call us at: (916) 425-1427 anytime!
Price
$19.92 – $224.40Price range: $19.92 through $224.40
Total
$19.92 – $224.40Price range: $19.92 through $224.40
Silicone Breather / Catch Can Hose
Here's the perfect solution for replacing that stiff clear hose or blue plastic hose that's found at your local hardware store... This Silicone Breather / Catch Can Hose is available in 2 popular breather sizes, 1 1/4" or 1 1/2" diameter. This is the exact hose that's being used by many of the top teams in the know for 2 reasons. First, because it's easy to work with in between rounds due to it's durable flexibility. And second, it offers that clean professional "correct" appearance you've been looking for. One end attaches to your breather hose end and the other to the bung on your chassis for front engine cars. Or, directly to your catch can for rear engine cars. It cleans up easily, is sold by the foot and available in either black or blue. Now you know exactly where to go for "correct" hard to find racing components, hardware and more... GoNitrolink.com
Choose quantity, ID", length size & color in the options menu below.
