We offer a complete line of all Taylor Motorsports Products!
Taylor Engine Diapers
For the best fit and lightest on the market, choose Taylor Engine Diapers to get the job done right the first time! These lower engine restraints meet or exceed SFI 7.1 specs and are custom made to fit your engine tightly. Unlike some of the "one size fits all" units that are offered elsewhere, these were designed to install easily or be removed quickly. And are equipped with removable absorption liners that can be replaced in a flash. Order yours today with either an oil repellent nylon, or upgraded light weight kevlar outer shell... Then start loading up for the next race!!!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all MSD Products!
MSD Pro Mag 44 Generator - New
As we all know, there are certain components on a race car you don't want to second guess, especially on race day... And when your dealing with Ignition Systems, you'll definitely want to make sure it's not the weak link when your trying to establish a base line tune up. And that brings us to this brand new MSD Pro Mag 44 Generator - New that's ready for showtime right out of the box! Choose either the popular counter clock wise rotation (CCW) for most Hemi's, or the clock wise (CW) model. This style, equipped with the Dunn drive set-up is available in either that awesome black, or popular red anodized finish we're all familiar with! And comes complete with a cap, rotor and wire hold down included. Producing an amazing 44 amps of primary current, it's no wonder that the Pro-Mag 44 is the only choice of top fuel dragster and nitro funny car teams everywhere!
Choose rotation and either red or black to match your other MSD components when ordering.
Racers Discount pricing available!
Please call: (916) 425-1427 anytime to order.
Small Cap model also available.
"Nitrolink" offers a complete line of all System 1 products!
System 1 Inline Fuel Filters
The distance between your fuel tank and the injector is not always as clean as it needs to be... This problem can cause a wide range of issues including lean cylinders, fuel pump, or barrel valve damage, and so on! So, lets offer a wide variety of brand new System 1 Inline Fuel Filters to fit your specific race application. This quality component can be ordered to work with nitro, alcohol, or gas. And is offered in either a 2 inch, or 2 1/4 inch diameter, with a length choice of 6, 9, or 11, inches long. The removable filter element makes it easy to service in between rounds and see exactly what's not going into your fuel system. Yours can be assembled with either a 35-micron filter, excellent for use in high fuel demand carbureted applications and nominally flows 24 GPM. Or, the 75-micron filter that's ideal for use between the pump and barrel valve. Set up with your choice of AN -6, AN -8, AN -10, or AN -12 fittings. And available in either red or black. Order yours today!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
We offers a complete line of all PSI Supercharger products!
PSI Single Mag Drive
Ignition timing is critical when it comes to getting your race car from A to B as quickly and efficiently as possible, right! And that's were this brand new PSI Single Mag Drive comes into play. Probably one of the nicest designs on the market, this one works with your popular Dunn clover leaf style drive on your mags. It's anodized black for that awesome look and sure to offer a well finished, sleek, profiled component that performs just as good as it looks! Outside housing is made of billet aluminum and it comes complete with a bronze gear, oil pump shaft and belt already installed and ready to go to work! Top quality racing components taken to the next level! GoNitrolink.com
We offers a complete line of all PSI Supercharger products!
PSI Dual Mag Drive
Running 2 mags has to be twice the fun, right! But first, we need to make sure both are in sync and working together for optimum performance on race day! And that's were this brand new PSI Dual Mag Drive comes into play. Probably one of the nicest designs on the market, this one works with your popular Dunn clover leaf style drive on your mags. It's anodized black for that awesome look and sure to offer a well finished, sleek, profiled component that performs just as good as it looks! Outside housing is made of billet aluminum and it comes complete with a bronze gear, oil pump shaft and belt already installed and ready to go to work! The best kept secret is out, because now you know exactly where to go for all the cool race parts! GoNitrolink.com
We offers a complete line of all PSI Supercharger products!
PSI Billet Mag Clamp
"Nitrolink" is your one stop shop when it comes to anything PSI! So why not let us help you keep your Magneto locked in place to help insure a consistent tune-up! This PSI Billet Mag Clamp is anodized black and offers quality second to none and installs and removes easily. It's made of light weight billet aluminum and comes complete with all hardware needed to keep your mag from moving during the run. Timing is everything on race day... And timing can't be more perfect to order one right here today!
We offers a complete line of all PSI Supercharger products!
PSI Screw Blower Mini Snout
Now here's an item that's sure to grab the attention of all you racers out there running a screw blower!
This brand new PSI Screw Blower Mini Snout is made of billet aluminum and works with your C, or D, style superchargers only. It's precision cut and o-ring equipped on the inside for a tight seal to prevent leaks. And mounts up to your front cover using 12 bolts to work with your 8, or 11, mm mini snout blower pulleys that attach with 6 bolts total. Inside shaft is heat treated for optimum strength making this high quality PSI performance product ready for battle if you are!
"Nitrolink" offers a complete line of all System 1 products!
System 1 Billet Dry Sump Hemi Oil Pump
Once you tow up, your attention is directed to making sure your race car starts... After that, you better have good oil pressure, right! This System 1 Billet Dry Sump Hemi Oil Pump is the exact same component many of the pro nitro teams on tour are using for several reasons. They're outstanding flow characteristics, versatility and long-term dependability are counted on weekly to keep those 11,000 horsepower engine alive! And could work just as well for your team! They can be set up to work on your "Big Show" Funny Car, Alcohol Funny Car, Pro Mod, etc. And can be ordered in 2 basic sizes, either 1.8 or 2.1 gear sizes. Pump is loaded with you're standard 5/16" size drive and equipped with an AN -8 size o-ring boss port for functions such as oil pressure gauge, Racepak or other on-board computer sensor, or rear oiling. And can be set with two adjustable pressure ranges (80-125 psi “low” and 125-250 psi “high”) and also includes two AN -12 IN/OUT fittings for the filter and stainless hard loop line. Give us a call with any questions as we're here to help anytime!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all System 1 products.
System 1 Billet Wet Sump Hemi Oil Pump
Once you tow up, your attention is directed to making sure your race car starts... After that, you better have good oil pressure, right! This System 1 Billet Wet Sump Hemi Oil Pump is the exact same component many of the pro nitro teams on tour are using for several reasons. They're outstanding flow characteristics, versatility and long-term dependability are counted on weekly to keep those 11,000 horsepower engine alive. And could work just as well for your team! They can be ordered in the following: 1.8, 2.1, 2.4, 2.7, or 3-inch tall gear size, to provide the desired volume (up to 50 GPM) and can be set with adjustable pressure ranges (80-125 psi “low” and 125-250 psi “high”) for virtually every application from fuel injected A/Fuel cars, to nitro-burning supercharged “Big Show” cars. Choose from three different style oil pick-up fittings; AN -16, AN -20, or special AN -16 quick-disconnect fitting for use with System 1’s special scavenging hose. This pump is equipped with an AN -8 size o-ring boss port for functions such as oil pressure gauge, Racepak or other on-board computer sensor, or rear oiling. And also includes two AN -12 IN/OUT fittings for the filter. They're machined for an AN -20 fitting on the scavenge side of the pump (AN -16 to AN -20 fittings available).
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Williams Products!
BAE / KB Funny Car Oil Pan - Williams
If you're running a BAE, or Keith Black block then this brand new dry sump BAE / KB Funny Car Oil Pan - Williams style is a great choice when it comes to performance and durability! And as many times as one of these goes on and comes off your race car, then installing a quality product is a must to keep going rounds! All nitro and alcohol pans features a 3/8" billet rail, built in trap door baffle, scraper, removable windage tray and large size drain plug for quick oil changes in between rounds. This style pan has a 6-7 qt. capacity and measures the standard dimensions and has a 3.5" depth in the front and 5" depth in the rear. And comes complete with a weld-in aluminum oil pick-up and can be ordered with an optional o-ring groove and pick-up fitting (not included). Choose either a -16, or -20 pick up bung size and we'll get one started for your team today! Price: $694.95
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Williams Products!
BAE / KB Dragster Oil Pan - Williams
If you're running a BAE, or Keith Black block then this brand new BAE / KB Dragster Oil Pan - Williams style is a great choice when it comes to performance and durability! And as many times as one of these goes on and comes off your race car, then installing a quality product is a must to keep going rounds! All nitro and alcohol pans features a 3/8" billet rail, built in trap door baffle, scraper, removable windage tray and large size drain plug for quick oil changes in between rounds. This style pan has an 11 qt. capacity and measures the standard dimensions and has a 7" depth from front to rear. And comes complete with a weld-in aluminum oil pick-up and can be ordered with an optional o-ring groove and pick-up fitting (not included). Choose either a -16, or -20 pick up bung size and we'll get one started for your team today! Price: $724.95
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Williams Products!
TFX Funny Car Oil Pan - Williams
If you're running a TFX block then this brand new dry sump TFX Funny Car Oil Pan - Williams style is a great choice when it comes to performance and durability! And as many times as one of these goes on and comes off your race car, then installing a quality product is a must to keep going rounds! All nitro and alcohol pans features a 3/8" billet rail, built in trap door baffle, scraper, removable windage tray and large size drain plug for quick oil changes in between rounds. This style pan has a 6-7 qt. capacity and measures the standard (23 7/8" x 11 1/4") dimensions and has a 4" depth in the front and a 6" depth in the rear. And comes complete with a weld-in aluminum oil pick-up and can be ordered with an optional o-ring groove and pick-up fitting (not included). Choose either a -16, or -20 pick up bung size and we'll get one started for your team today! Price: $694.95
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
