Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Waterman Wet Sump Oil Pump
Setting the standard for years when it comes to high quality components, Waterman always delivers! And this slightly Used Waterman Wet Sump Oil Pump is no different! This one's your standard gear style, equipped with an extra scavenge and hose included to allow you to pull oil from the cylinder head or block. It has an outside oil pressure adjustment valve and was recently inspected, with both the inside housing and gears showing normal minimal wear. Pump is set up with (2) -12 fittings for your oil filter, (1) -16 fitting for your oil pick-up and (1) -6 fitting for your oil pressure reading. One more left, so come and get it!
Taylor Blower Bag & Restraint
Outfit your ride with this upgraded Taylor Blower Bag & Restraint set-up that's up for grabs today!!! Install or remove it easily on your Nostalgia Nitro Funny Car or Top Fuel Dragster, Blown Alcohol Altered, Supercharged Gas Dragster, Drag Boat, Tractor Puller and so on...
This one's equipped with current cert tags, is in excellent shape and can work with many of the different brands of 6-71 Superchargers on the market. It's the upgraded Top Fuel model that meets the highest SFI 14.3 spec for Blower Restraints. Or, if you're running an alcohol car that requires the lower grade 14.2 Blower Restraint set-up, then you're in luck! Because this one will pass tech for you as well, no problem. The nomex cover and all straps are in nice shape with normal minimal wear. Top Plate is slightly used, in nice condition and free of any stress cracks or damage. And measures the standard 20 1/8" long by 10 5/8" wide. With the Blower opening measuring 10" long by 4 1/2" wide. PLEASE NOTE: Includes everything in the photos. Header Brackets and Pins are not included. So here's your chance to replace that crispy worn out Blower Bag on your race car... And save your team several hundred bucks at the same time by ordering everything right here!
Brand new this exact set-up will run you right at $1,850 bucks without the brackets & pins! But don't even think of spending that much when you can pick this one up right here for a fraction of the cost of new... Quality racing components + Unmatched customer service = GoNitrolink.com
Keith Black 426 Hemi Magnesium Valve Covers
Go with Nitrolink Racing Components for all your hard to find racing parts and accessories! And we'll keep delivering items just like this rare, set of Keith Black 426 Hemi Magnesium Valve Covers to help raise the cool factor on your awesome ride just a little more! This set is made of light weight magnesium, then was dow 7 coated for that signature look. They're slightly used, in very nice shape and free of any damage or repairs and ready to work with your fuel heads equipped with 5/16" size studs. Plus, they're the extremely popular dual plug style, that can also be used if you're only running 8 spark plugs by simply adding a set of removable aluminum block-off caps (sold separately). Includes everything you see in the photos. Plug tubes sold separately. This style valve cover is getting tougher to find out there in this condition and won't last long, so just like on the race track, reaction time will win this set right here! Hard to find racing components taken to the next level right here! GoNitrolink.com
Price
$1,400.00 – $1,950.00Price range: $1,400.00 through $1,950.00
Total
$1,400.00 – $1,950.00Price range: $1,400.00 through $1,950.00
"Nitrolink" offers a complete line of all Dan Olson Race Products!
Dan Olson Top Fuel - A/Fuel Headers
Check out the photos on this brand new set of Dan Olson Top Fuel - A/Fuel Headers and then think of how awesome they would look on your Top Fuel or A/Fuel Dragster, Blown Altered, Tractor Puller, Drag Boat and so on... They can be ordered to fit any stage fuel heads or fat heads by Alan Johnson, BAE, Dart, etc. And are available in either 2 1/2", or 2 3/4" tube diameter with the standard degree bend. They can be set up with or without EGT bungs ready to accept your Racepak or similar Computer Probes if you're running them. And each set comes complete with lightened reinforcement tube gussets to complete this very nice package!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Track Meter Race Track Surface Analyzer
Every "Big Show" nitro team on tour does it... They gather up as much data as possible so they can plug in they're best tune-up prior to sending their driver down the race track... And now, so can you! Knowledge is key and this original pro style Track Meter Race Track Surface Analyzer is the exact one you see on TV every weekend. And could provide your race team with that one extra advantage needed to be one step ahead of the competition on race day. This simple to use tool, when used correctly provides consistently accurate measurements of several key areas on the race track surface. Your crew member simply stands on both machined aluminum foot tabs, turns the handle to a specified degree, then reads the gauge... Done! Each Track Meter comes with an easy to install data tracking software to store your measurements, current temperature, time of day, and lane side to aid in track surface analytics, that can be stored for multiple runs during qualifying and eliminations. Start building your library of data from multiple race tracks over multiple runs for years of comparison data to aid in race car set-up from here on out! Order one today... Now you're ready to play!!!
"Nitrolink" offers a complete line of all MSD Products!
MSD Pro Mag Power Grid - Top Fuel - F/C
State of the art performance adjustment capabilities right here for all our Top Fuel and Nitro Funny Car customers! This MSD Pro Mag Power Grid - Top Fuel - F/C is mandated in both NHRA & IHRA competition. And provides a programmable time-based timing curve with up to 30 points at 1.0 increments down to 0.01 second intervals. It stores different timing maps that can easily be transferred or changed at the last minute while waiting in the staging lanes. The MSD View Software that's included provides a virtual dash board that can be configured to display engine RPM, timing, timing retard, WOT, timing reset, crank trigger inputs and output triggers. And also includes a CAN-Bus connection sending the recording to your Racepak Data Logger. Install one today... And get from A to B more efficiently tomorrow!
Racers Discount pricing available!
Please call: (916) 425-1427 anytime to order.
"Nitrolink" offers a complete line of all MSD Products!
MSD Pro Mag 44 Coils - New
Check this out !!! MSD Pro Mag 44 Coils - New deliver 50,000 volts of long-duration spark to the spark plugs to ensure that the huge amount of nitro or alcohol that's being force fed into the cylinders is ignited. These brand new coils are a key component to the complete Pro Mag 44 system used by both pro-level and sportsman race teams. Internally, there's more than a pound of high-quality copper wire tightly wound around the specially designed DuPont Rynite molded core, allowing them to handle the 44 amp output that only the Pro Mag 44 Magneto can deliver. The winding's inside, along with all the other internal components are completely wrapped in heavy-duty epoxy for maximum reliability and protection from vibrations that only a 300+ MPH rocket ship on wheels can deliver! It comes complete with 4 extreme duty anti-vibration mounts and detailed instruction sheet.
Choose either black or red to match your other MSD components in the "options" menu below...
Please note: Not for use with the Pro Mag 12 ignition system.
Price
$1,449.95 – $1,499.95Price range: $1,449.95 through $1,499.95
Total
$1,449.95 – $1,499.95Price range: $1,449.95 through $1,499.95
We offer a complete line of all Racepak products!
Here's one more example of how you can race smart by taking full advantage of monitoring one more area of valuable on-track race data!
Racepak Aluminum Flow Meters
In drag racing knowledge creates power... And having access to valuable data during a run helps assist you in knowing exactly how to manage it! And that's exactly what these brand new Racepak Aluminum Flow Meters do best! This high performance turbine-style racing component is the aluminum style primarily recommended for nitro applications. It delivers an accurate fuel flow reading allowing you to closely monitor the performance health (GPM) of your fuel pump and also confirms the function of your fuel timers and fuel system lean-outs. Flow Meters can also be used to monitor your hydraulic clutch system flow if you choose, so you can look at that as well. They're available in three sizes, to work with your -8, or -12 lines. Why not take advantage of all the data you can get to help fast-track your journey to the winners circle! Order yours today!
Choose -8, or -12, in the "options" menu below.
Price
$1,449.95 – $1,499.95Price range: $1,449.95 through $1,499.95
Total
$1,449.95 – $1,499.95Price range: $1,449.95 through $1,499.95
We offer a complete line of all Racepak products!
Here's one more example of how you can race smart by taking full advantage of monitoring one more area of valuable on-track race data!
Racepak Stainless Flow Meters
In drag racing knowledge creates power... And having access to valuable data during a run helps assist you in knowing exactly how to manage it! And that's exactly what one of these brand new Racepak Stainless Flow Meters do best! This high performance turbine-style racing component is the stainless style primarily recommended for alcohol or gas applications. It delivers an accurate fuel flow reading allowing you to closely monitor the performance health (GPM) of your fuel pump and also confirms the function of your fuel timers and fuel system lean-outs. They're available in three sizes, to work with your -8, -10, or -12 lines. Why not take advantage of all the data you can get to help fast-track your journey to the winners circle! Order yours today!
Choose -8, -10, or -12, in the "options" menu below.
Price
$1,995.00 Original price was: $1,995.00.$1,495.00Current price is: $1,495.00.
Total
$1,995.00 Original price was: $1,995.00.$1,495.00Current price is: $1,495.00.
Intake Manifold Flatness Checker
Here's one more specialty pit tool that's sure to earn it's keep the first time it lets you know there's a problem before the next round! Check out this brand new
Intake Manifold Flatness Checker that offers precision accuracy to determine if your blower manifold is perfectly flat, or if it needs to be lapped for an optimum blower to manifold seal. Don't risk loosing critical boost pressure by running a warped manifold just because you don't have the proper tool to diagnose the problem. Here's one more way to help prevent declining performance, or possible costly parts failure on the race track. This valuable tool is ready for action right out the protective wooden case that's also included. That helps provide secure storage in your trailer, at your race shop, or on the road. And it works with most any size blower manifold on the market... Making sure you're better prepared for the next event is what we do best! GoNitrolink.com
FIE Hemi Magneto & Coil
Recently tested and ready for showtime allows you to buy this slightly used FIE Hemi Magneto & Coil with confidence right here at Nitrolink!!! And if you're running a Nostalgia Top Fuel Dragster, Nostalgia Nitro Funny Car, Blown Altered, Drag Boat, etc; then you're on track to save big time! This 7.86 amp points style magneto, with a CCW rotation was recently tested good to go and not been run since. It's equipped with the popular Dunn style cross-drive, slightly used rotor and brand new cap. The slightly used FIE large size Coil that's also included was recently tested as well and comes with a billet mounting bracket for a quick easy installation. For this exact set-up brand new, expect to pay right at $2300 bucks! But not here... Not today! Save more, race more, win more! Gonitrolink.com
"Nitrolink" offers a complete line of all MSD Products!
MSD Pro Mag 44 Rev Limiter Points Box - New
If you're looking for an ignition points box with an extra added safety feature, then this brand new MSD Pro Mag 44 Rev Limiter Points Box - New could be the answer. This style is equipped with a built-in rev limiter that allows you to preset the maximum amount of engine RPM desired using the different chips that are also included. All internal electronics are protected by a strong cast aluminum housing that provides a solid mounting foundation, as well as an excellent heat sink. Internal circuits are coated with a heavy-duty coating of Humi-Seal compound for protection against 300-mph vibrations. This unit connects quickly to your MSD Pro Mag 44 Magneto using a 4 pin Deutsch connector that's already installed. And it comes complete with mounting hardware, vibration mounts, chips, and instructions.
Choose either black or red to match your other MSD components in the "options" menu below.
