BRAND NEW!!!
Magnesium Blower Snout
Light weight & hard to find are 2 words that best describe this brand new Magnesium Blower Snout that's perfect for all our weight conscious customers out there! And this one's sure to deliver the quality and craftsmanship you've come to expect right here! It's the light weight upgraded magnesium 6 bolt style, that measures 3.9" long. And is in excellent shape, has a nice brilliant shine and has never been down the race track. And it comes complete with a brand new Coupler, Gasket and Hardware..."Supercharged Savings" daily at GoNitrolink.com
Vintage Filler Drivers Suit
Check out the "Nitrolink" Vintage Section right here on our website regularly because there's more items similar to this one on the way!!! But first, let's take you back to 1986 with this Vintage Filler Drivers Suit that's sure to offer any private collector that unforgettable look that the 80's was famous for! This one's the 2 piece style with multi colored stripes down the sides and original patches included. And even though it cannot be re-certed for use in any competition any longer, it can definitely offer it's new owner a trip down memory lane every time you see it! GoNitrolink.com
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used AFT Slide Valve - Large
Another budget friendly high performance component would be this slightly Used AFT Slide Valve - Large style, designed for the larger size fuel systems to help with fuel management. This one's ready to accepts your -10 size fittings and is in great shape, made of billet aluminum and works in conjunction with your BDK Valve. Fuel management at a deep discounted price, right here!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Moroso Dry Sump F/C Oil Tank
If you're getting ready to start on that project in your race shop, or just looking to replace your current tank on your funny car or altered then this next item takes care of both! This nostalgia style Used Moroso Dry Sump F/C Oil Tank is sure to go easy on your check book! It's made of aluminium, anodized black and in good used shape with your common nicks, scratches, etc; from normal use. Tank measurements are: 12" tall in front, by 15" tall in the back, by 16 1/4" tall at its highest point by the cap and is 3 1/2" wide. It's free of any damage or repairs, has a 3 gallon capacity and equipped with inside baffles. Inlets on top and the drain plug bung on the bottom are ready to accept your -12 size fittings and drain plug, (not included) and the suction outlet on the back is the -16 size. Also included is a billet filler cap to wrap up this money saving deal!
"Nitrolink" offers a complete line of all Racepak products!
Racepak SD Cartridge Reader Kit
Every run counts!!! So don't risk loosing valuable run data by using an "old school" transfer package. Here's the perfect opportunity to upgrade that out of date cartridge and reader with this new style Racepak SD Cartridge Reader Kit. This one's compatible with the newer style 64 bit PC's or Laptops. And does away with the old style reader box that use to plug directly into your computer. Now, just plug the SD cartridge into your data logger after a run, download your race data, then pull out the small 2GB SD card and insert it directly into your computer for a more dependable transfer. Plus, you now have less equipment to carry around and set up... How cool is that!
Another BRAND NEW item... Without the brand new price!!!
RCD Fuel Pump Extension
A successful race team watches every dollar spent... So, lets help save you a few bucks right here with this brand new RCD Fuel Pump Extension that's ready to perform just as well as it looks! This one's made of billet aluminum and is the 3" size that works in conjunction with your RCD gear drive front cover and fuel pump extension drive shaft, that runs off your cam gear (both sold separately). Another quality race product to help your racing budget go a little further! GoNitrolink.com
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used MSD Battery Packs & Charger Kit
Lets save you some money right here with this Used MSD Battery Packs & Charger Kit that helps power up your ignition management such as six shooters, power grid, etc. Each battery delivers 14.4 volts and all three items are in great shape and equipped with Deutsch connectors for a secure fit. This package comes complete with (1) MSD smart charger and (2) battery packs, one for the car and one for a spare. This kit will be sold with a fresh set of batteries, so rest assured your money will be well spent here!
"Nitrolink" offers a complete line of all MSD Products!
MSD Dual Mag Hemi Wire Kit - Pro Mag 44
Dual Mags!!! That's just twice the fun, right? So, why not offer a MSD Dual Mag Hemi Wire Kit - Pro Mag 44 for each, to help get your ignition system back into shape right before the next race! This dual mag kit includes 2 sets of extra long 8.5mm universal super conductor spark plug wires that can be cut to your exact lengths for a clean installation. They offer a copper core inside, with a special blend of silicone and synthetic material that make up the sleeve outside to create a highly resistant, high heat shield that also helps protect against abrasion and tears. The plug tubes, are molded from a special material known for its high dielectric properties. And all elbows, end caps and screws are included as well. Plug wire boots for both ends are made of silicone, providing an excellent resistance to heat and maximum protection against spark loss. Spark plug terminals for both ends feature "Dual Crimp" terminals. One for the sleeve of the wire and another separate crimp to hold the conductor. Just a couple clicks thru our website to order... Job done!
Choose either red or black to match your other MSD components in the "options" menu below.
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Weld Racing Beadlock Rings
Now here's an excellent opportunity to score on a complete set of slightly Used Weld Racing Beadlock Rings to take care of both wheels! And while we're at it, lets save you some hard earned cash at the same time! These are for the 16" wheels that utilize 24 mounting bolts (not included). They're in very nice shape with no damage or repairs and work with your 5/16" size bolts. The polished finish is in great condition and this complete set of beadlock rings is ready to perform just as nice as they look!
Includes 4 pieces total.
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Weld Racing Beadlock Rings
And if you need to replace both wheels with a complete set of slightly Used Weld Racing Beadlock Rings then we can do that too! These are for the 16" wheels that utilize 18 mounting bolts. They're in very nice shape with no damage or repairs and work with your 5/16" size bolts (not included). The gold anodized finish is in great condition and this complete set is ready to install right out of the box!
Includes 4 pieces total.
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used AFT Slide Valve - Small
Lets get the job done for a lot less money, with this slightly Used AFT Slide Valve - Small style, designed for the medium size fuel systems to help with fuel management. This one's ready to accepts your -10 size fittings and is in great shape, made of billet aluminum and works in conjunction with your BDK Valve. Save time, save money, GoNitrolink.com!
Vintage JP1 426 Hemi Gear Drive Front Cover
Tow in to the next event Cacklefest ready with this rare, hard to find Vintage JP1 426 Hemi Gear Drive Front Cover that's sure to help complete the picture the minute it's seen! This one's in excellent shape and free of any damage or repairs. It's made of light weight cast aluminum and ready to bolt up to your Keith Black, BAE, or JP1 cast block. Cam or crank gear not included. Here's one more opportunity to give your ride that awesome old school appearance it deserves with the exact components that were available back in the good old days! Check back often right here, as there's more cool vintage race parts just like this one on the way!
GoNitrolink.com
