Another BRAND NEW item... Without the brand new price!!!
CP 426 Hemi Coated Nitro Pistons
How about another brand new product, without the brand new price tag! This set of (10) brand new CP 426 Hemi Coated Nitro Pistons are the 4.187 bore size and ready to accept your 1.156" pin size, with a 1.715 compression height. Ring groove sizes are as follows:
Top = .0745, Second = 1/16", Oil ring = 3/16" size. We only have one set available, so click on "buy now" because just like on the starting line, reaction time helps win the race! GoNitrolink.com
Used Waterman Fuel Pump
Blown Alcohol Dragsters & Funny Cars to the lanes please!!! But, before you tow up... Let's get you set up with this slightly Used Waterman Fuel Pump that's sure to save you a small fortune not having to buy new! This one's the "Lil Bertha" model, set up for alcohol that could work on your Blown Alcohol Dragster, Funny Car, Altered, Drag Boat, Tractor Puller, and so on. It's in very nice shape inside, flows right at 16.9 gallons and includes a flow chart. And loaded with a set of .800 size spur gears, a -10 size 3 way shut-off, a 3/8" size pump shaft, an 1 1/2" size inlet and cable bracket plate that are all ready to go to work! Save, Race, Win, Repeat! GoNitrolink.com
Vintage JP1 426 Hemi Gear Drive Front Cover
Tow in to the next event Cacklefest ready with this rare, hard to find Vintage JP1 426 Hemi Gear Drive Front Cover that's sure to help complete the picture the minute it's seen! This one's in excellent shape and free of any damage or repairs. It's made of light weight cast aluminum and ready to bolt up to your Keith Black, BAE, or JP1 cast block. Cam or crank gear not included. Here's one more opportunity to give your ride that awesome old school appearance it deserves with the exact components that were available back in the good old days! Check back often right here, as there's more cool vintage race parts just like this one on the way!
GoNitrolink.com
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
RCD 426 Hemi Offset Mag Drive
How about a nice clean profiled product that's sure to offer that professional look your race team is known for! This slightly used RCD 426 Hemi Offset Mag Drive is in excellent shape and free of any damage with normal minimal wear. It's made of billet aluminum and can work with your TFX, BAE, Keith Black, or JP1 cast or billet blocks. And equipped with the RCD style gear, steel shaft with a 5/16" size hex for your oil pump and bronze gear, all in very nice condition. Brand new, these go for right at $1350 bucks! But not here... Not today! Install this one right out of the box, set your mag, then pull to the lanes! Helping your team race for less, is what we do best! GoNitrolink.com
Alan Johnson 426 Hemi Blower Manifold
Super clean and ready to install right out of the box! Check out this Alan Johnson 426 Hemi Blower Manifold for your nitro, alcohol, or gas burning Dragster, Funny Car, Altered, Drag Boat, or ? This manifold is the .100 tall, 6 bolt style that's slightly used, in great shape and made of light weight magnesium. It free of any damage or repairs and measures right at 6" tall. And has provisions to run port nozzles if you choose. Otherwise, just plug them off. Oil filler inlet location is in the back for easy access (cap not included). And this one's set up to run the standard, large size burst panel in the back (sold separately). However, it can be easily modified to run a burst panel in the front if you choose. The Blower opening at the top is o-ring ready and measures the standard 4 1/4" wide by 15 13/16" long. And this manifold can work with your SSI, Kobelco, Littlefield, PSI, Mooneyham, or Kuhl, 6-71 to 14-71 roots style superchargers. It can be used with your fuel heads made by BAE, or Dart, that are set up for a 6 bolt manifold. As well as any Alan Johnson Stage 5's, 6's, or 7 fuel heads.
PLEASE NOTE: This manifold WILL NOT work if you're running "fatheads" like the A/Fuel cars are running, (such as Brad Stage 3's, 4's, 5's, etc). A brand new manifold just like this one is going to set you back over $3400 Bucks!!! But don't even think about spending that much when you can pick up this super clean set-up right here for a fraction of the cost... Helping your team save big $$$'s is why we're here! GoNitrolink.com
Priced to move at: Only $2495. Or best offer.
Keith Black 426 Hemi Magnesium Valve Covers
Go with Nitrolink Racing Components for all your hard to find racing parts and accessories! And we'll keep delivering items just like this rare, set of Keith Black 426 Hemi Magnesium Valve Covers to help raise the cool factor on your awesome ride just a little more! This set is made of light weight magnesium, then was dow 7 coated for that signature look. They're slightly used, in very nice shape and free of any damage or repairs and ready to work with your fuel heads equipped with 5/16" size studs. Plus, they're the extremely popular dual plug style, that can also be used if you're only running 8 spark plugs by simply adding a set of removable aluminum block-off caps (sold separately). Includes everything you see in the photos. Plug tubes sold separately. This style valve cover is getting tougher to find out there in this condition and won't last long, so just like on the race track, reaction time will win this set right here! Hard to find racing components taken to the next level right here! GoNitrolink.com
Carbon Fiber Engine Containment Diaper
State of the art nitro & alcohol racing components are what we do best! And when it comes to one of the nicest buckets on the market, check out this brand new Carbon Fiber Engine Containment Diaper that's ready to offer a quicker, cleaner option than the standard fabric style diaper during removal & installation in between rounds. It's light weight and can be ordered to work with either the TFX or BAE/KB 426 Hemi aluminum blocks. And this one, unlike the other carbon fiber bucket on the market comes outfitted with light weight titanium side plates to help offer extra added protection in the event of connecting rod failure. Also included is a set of 4 upgraded kevlar mounting straps that can be ordered with your choice of either the header mount style (pictured) or chassis mount style straps. Both the bucket and straps are NHRA "tech friendly" with current SFI 7.1 tags. And a set of 2 side absorbent pads are also included as well. Please specify your brand of oil pump, wet or dry sump and pan measurements when ordering... The coolest place on the planet for Carbon Fiber Drag Racing Components! GoNitrolink.com
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
We offer a complete line of all Rob Moore Performance Products!
Moore Performance Reverser Output Shafts
Quality second to none is exactly what you'll find right here! And these brand new
Moore Performance Reverser Output Shafts are the only choice of the majority of the pro nitro teams on tour for two reasons... Performance & Durability! These are sold separately and work specifically with the Moore Reverser. They're the standard 1 3/4" 40 spline style that's offered in 2 lengths: Large = 6" out from the reverser. Or, Small = 3.265" out from the reverser, with other custom lengths available. They're made of heat treated steel and are a work of art when it comes to craftsmanship! Hi performance taken to the next level, right here! GoNitrolink.com
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
We offer a complete line of all Rob Moore Performance Products!
Moore Performance Custom Input Shafts
Performance, Durability and the choice of Champions is what you're looking at right here! Check out these brand new Moore Performance Custom Input Shafts that are being offered in 3 popular sizes: 1 3/8" 10 spline, 1 3/4" 10 spline, or 1 7/8" 10 spline on the clutch pack side. They're sold separately and can be ordered to work with your Moore Performance or Lenco reverser if you're running direct drive. Or, Lenco or B&J transmissions, with your choice of either a large or small pilot size. They're made of heat treated steel and another example of craftsmanship at its finest! Next level, hi performance components 24/7 right here! GoNitrolink.com
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Heavy Duty Valve Lash Adjusting Torque Wrench
Designed specifically for Blown Nitro & Alcohol Engines... And custom built to meet your specs!!! This high quality precision Heavy Duty Valve Lash Adjusting Torque Wrench comes equipped with a longer handle for better leverage. It simplifies precision valve lash settings by properly torquing all adjuster nuts accurately. And this style is delivered to your door preset to the torque spec of your choice, from 20 to 45 lbs. It also comes complete with your choice of either a 7/16" or 1/2" 12pt. socket that's welded on... So it stays on! And finally, choose your Hex Key size, either 5/32 or 3/16 and you're all set... Custom designed just for you! Specialty Pit Tools and a whole lot more, right here! GoNitrolink.com
Choose Socket size, Hex Key size and Torque preset in the "options" menu below.
"Nitrolink" offers a complete line of all Simpson Race Products!
Simpson 12' Crossform "Pro" Chute - Black Pack
Check out this BRAND NEW Simpson 12' Crossform "Pro" Chute - Black Pack for your nitro, alcohol, or gas burning Dragster, Funny Car, Altered, Pro Mod, A/Fuel Car, Show Car, or ??? These are the Top Fuel / Nitro Funny Car 12' Crossform models with the light weight black nomex pack, for cars running 200-300+ MPH. They're equipped with the 3/4" size lanyard straps instead of the smaller nylon lines commonly used on the lighter duty chutes. Canopy colors come in red, blue, or black. And it comes complete with a pack, aluminum back-plate and pilot chute included for a complete package. Release cable not included. So here's the perfect opportunity to replace that old worn out Chute you're currently running on your race car. Or, grab one up for a spare!
All Chutes are sold Separately.
Choose either Red, Blue, or Black in the "options" menu below.
Nitrolink is you're one stop shop for all Clevite Engine Bearings...
Clevite 3" Main Bearings 426 Hemi MB-3564 VU (20) - Upper
These Clevite 3" Main Bearings 426 Hemi MB-3564 VU (20) - Upper are sold in a pack of (20) and are the standard when it comes to offering a more affordable alternative without the coating. While still providing unmatched quality and performance Clevite Products are know for. They are built on an un-plated, hardened-steel backing for better dimensional accuracy and bore contact. And offer a low-to-medium eccentricity. Manufactured with a lead-indium surface alloy, which allows them to conform better for a precise fit. This style Bearing is by far the most popular with racers competing in a wide variety of classes everywhere!
Racers Discount pricing available! Call: (916) 425-1427 anytime to order.
Bearings available for Hemi, Chevy, or Ford.
