Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 8mm 47T Blower Pulley
How about a nice Used RCD 8mm 47T Blower Pulley that's in great shape and ready for showtime! This one's the GT style made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. Pulley is anodized black for the cool visual factor. And measures 3 1/2" wide and could work on most any brand of 4-71, 6-71, 8,10,12, or 14-71 Superchargers on the market. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, Tractor Puller, Pro Street, or Hot Rod and DROP THE HAMMER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 8mm 57T Blower Pulley
Check out this nice Used RCD 8mm 57T Blower Pulley that's in great shape and ready for showtime! This one's the GT style made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. Pulley is anodized black for the cool visual factor. And measures 3 1/2" wide and could work on most any brand of 4-71, 6-71, 8,10,12, or 14-71 Superchargers on the market. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, Tractor Puller, Pro Street, or Hot Rod and DROP THE HAMMER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 8mm 65T Blower Pulley
If you're looking for a nice Used RCD 8mm 65T Blower Pulley and looking to save a few bucks at the same time, then it's you're lucky day! This one's the GT style made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. Pulley is anodized black for the cool visual factor, measures 3 1/2" wide and could work on most any brand of 4-71, 6-71, 8,10,12, or 14-71 Superchargers on the market. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, Tractor Puller, Pro Street, or Hot Rod and DROP THE HAMMER!!!
Used System 1 Dry Sump 426 Hemi Oil Pump
One critical component needed to get your race team to the winners circle is to have good oil pressure! So check out this slightly Used System 1 Dry Sump 426 Hemi Oil Pump that's similar to what many of the pro nitro teams on tour are running simply because of their outstanding flow characteristics, versatility and dependability. This one's in great condition inside and set up with a 1.8 and 2.1 gear size that could work well on your Nostalgia Nitro Funny Car, Alcohol Funny Car, Pro Mod, etc. It features you're standard 5/16" size drive and equipped with an AN -4 fitting for functions such as oil pressure gauge, Racepak or other on-board computer sensor, or rear oiling. Plus, two AN -12 IN/OUT fittings for the filter and a stainless hard loop line are included as well...
Personalized Customer Service second to none! GoNitrolink.com
Used Waterman Fuel Pump
Blown Alcohol Dragsters & Funny Cars to the lanes please!!! But, before you tow up... Let's get you set up with this slightly Used Waterman Fuel Pump that's sure to save you a small fortune not having to buy new! This one's the "Lil Bertha" model, set up for alcohol that could work on your Blown Alcohol Dragster, Funny Car, Altered, Drag Boat, Tractor Puller, and so on. It's in very nice shape inside, flows right at 16.9 gallons and includes a flow chart. And loaded with a set of .800 size spur gears, a -10 size 3 way shut-off, a 3/8" size pump shaft, an 1 1/2" size inlet and cable bracket plate that are all ready to go to work! Save, Race, Win, Repeat! GoNitrolink.com
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used XRP/Wiggens Style O-Ring Boss Fitting
Save valuable time in between rounds with this nice Used XRP/Wiggens Style O-Ring Boss Fitting. This one's a size -12, typically used as an oil pump fitting on the filter side, or can be used for other applications as well. It allows you to utilize a Wiggens Clam Shell style clamp. It works with your female XRP/Wiggens hose end fitting and is equipped with 2 viton o-rings to provide a secure fit. It offers quick removal compared to conventional screw on fitting. And used by many of the pro race teams on tour.
Used Y-Block
Get ready to press this slightly Used Y-Block into service and save yourself a few bucks right at the step! This one's in nice shape, anodized black and already loaded with (2) -8's and (1) -12 fitting included. However, these sizes can be changed out easily enough using your ORB fittings to meet your size requirements. So, if you're getting ready to hit the road soon for the race weekend, at this price... Don't forget your spare! Save, Race, Win, Repeat! GoNitrolink.com
Uyehara Bracket Altered
Complete, turn-key and ready to go racing!!! And if you're looking for a completely different way to fill your weekends with a whole lot of fun and excitement in 2027, then this nice used nostalgia style Uyehara Bracket Altered has your name all over it!!!
And the great news is, you'll load this one up for a fraction of the cost of new!
Check out the awesome stealth appearance this one has to let your competitors know you're there for one reason... To get the job done on race day! This quality built Uyehara race car is NHRA "tech friendly" and would be perfect for Nostalgia 2, B-Gas, or ? Best ET so far is: 8.40 @ 155 MPH on alcohol, as is. However, it can be set-up to run quicker if you choose with a few minor updates.
It's outfitted to accommodate a medium/large size driver, and features a custom flip-up fiberglass body for easy access to the drivers compartment. Along with top of the line components, a body that's ready for your custom paint or wrap. And a money saving price... So, let's get to it!
About the Car...
125" WB. Uyehara Chassis
• Shoulder Hoop is 20.5" across
• Bottom of Seat to Roll Cage Pads: 35.5”
• 500 C.I. Big Block Mopar
• Edelbrock Performer Cylinder Heads
• Edelbrock Victor Intake Manifold
• APD 1050 CFM Carburetor
• JE Pistons
• H-Beam Steel Rods
• Billet Crankshaft
• MSD Ignition System
• Magna Fuel Pump
• Meziere Remote Water Pump
• System 1 Oil Filter
• Frame Works Pro Air Shifter
• ATO Powerglide Transmission with Trans-Brake
• DP Torque Converter
• TCI Transmission Shield
• On-Board Water Cooling System
• Moroso Overflow Tank
• Mark Williams 9" Standard Rear End
• Custom Shorty Stainless Headers
• Misc. Gauges & Shift Light
• Air Armed On-Board Air Compressor
• Simpson Chute
Centerline Rear Wheels
• Billet 10 Spoke Front Wheels
• And much more...
So, here it is... Your chance to take the next step! This complete package is available immediately and sure to save it's new owner a whole lot of time and money not having to put it all together from the ground up! 2027 could be your year... So, let's make it happen!!!
Priced to move at: Only $22,950. All serious reasonable offers considered.
Valve Cover Breathers & Wiggins Clamps
How about a nice state of the art set of Valve Cover Breathers & Wiggins Clamps that were designed to work with the titanium valve covers we offer here on our website! However, the great news is this set can also work with your application just as well. These are the largest size available that accept your 1 1/2" diameter size hose with the standard pattern mounting plate. And what's cool about this set is they're equipped with the super trick wiggens "clam shell" clamps to help keeps the hose ends from coming loose during competition. These breathers and clamps are the exact set-up that the majority of the top nitro teams are using because of how well they perform, their larger size and how quickly they can be removed. High end racing components taken to the next level! GoNitrolink.com
"Nitrolink" offers a complete line of all Triple-T Race Products!
For over 25 years Triple T Race Products has been on the front line providing top quality pit area and race shop equipment second to none. They continue to supply the majority of the biggest name teams in both top fuel and nitro funny car with products that are put to the test under the harshest conditions every weekend. And continue to meet or exceed those expectations consistently! Check out the following quality product sure to deliver both unmatched service and a professional image your race team deserves...
Valve Straightening Tool - Triple-T
Being fully prepared is key to a successful race weekend! And having a brand new
Valve Straightening Tool - Triple-T in your race trailer like this one could make the difference of either going rounds, or going home! This high quality tool is offered in 3 different valve stem sizes: 5/16", 11/32", or 3/8" and definitely one of the nicest on the market. It was designed to be used as a last resort, when you're unable to replace a slightly bent valve with a new one. It fits securely in your vise and is made to last from heavy duty steel with a coated finish. And comes complete with a dial indicator for precision accuracy and a handle that's comfortable to work with... Specialty Pit Tools 24/7 right here! GoNitrolink.com
Price: $325.00 each.
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Another BRAND NEW item... Without the brand new price!!!
Venolia 426 Hemi Aluminum Rods
Saving your race team hard earned $$$'s is one more thing we do best here at Nitrolink... And if you're in need of a longer size rod for your set-up, then do we have a deal for you!!! Check out this brand new set of Venolia 426 Hemi Aluminum Rods that are ready to ship out immediately, with no wait time! This set of 9 total, is the Venolia "V-Series" style and gives you one spare to work with. All rods included have a 7.522" length and work with your 1.094" pin size and ready to be pressed into service shortly after you give us a call, or click the "buy it now" button! GoNitrolink.com
Vintage Keith Black Dual Oil Filter Adapter
Pure nostalgia offered right here with this awesome Vintage Keith Black Dual Oil Filter Adapter that's sure to help all our Cacklefest customers out there meet their requirements to only install the exact components that were used back in the day! This one's slightly used, made of cast aluminum, in nice shape and free of any damage or repairs. And equipped with a set of fittings ready to work with your -12 size lines. Filter surface diameter measures
3 1/4" round edge to edge and this one's set up to work with any brand of the smaller style spin-on oil filters (not included) made to fit that diameter. Includes everything you see in the photos. And if you're looking for more vintage items just like this one, then keep checking back... There's more on the way! GoNitrolink.com
