"Nitrolink" offers a complete line of all Triple-T Race Products!
For over 25 years Triple T Race Products has been on the front line providing top quality pit area and race shop equipment second to none. They continue to supply the majority of the biggest name teams in both top fuel and nitro funny car with products that are put to the test under the harshest conditions every weekend. And continue to meet or exceed those expectations consistently! Check out the following quality product sure to deliver both unmatched service and a professional image your race team deserves...
Crank Gear Puller Tools - Triple-T
Use one of these handy Crank Gear Puller Tools - Triple-T once and wonder how you ever got along without it! Designed to remove your crank gear safely and efficiently this brand new high quality tool is made to last. It's steel construction is ready to make short work of this task every time you reach for it! We're happy to help anytime with all your specialty pit tool needs! GoNitrolink.com
Cylinder Head Stands
If you're looking to streamline your racing operation, then paying close attention to even the small task challenges usually translates into a productive weekend on the race track! And this handy set of brand new Cylinder Head Stands can certainly help in that department! No bolts, clamps or adapters required with this 2 piece set. Their light weight aluminum construction and slip resistant neoprene covered rails makes this set perfect for use in your pit area. And they're compact size allows them to stow away practically anywhere in your race trailer or back at the shop. Just another "Nitrolink" specialty tool to help keep things running smooth on your team!
"Nitrolink" offers a complete line of all Triple-T Race Products!
For over 25 years Triple T Race Products has been on the front line providing top quality pit area and race shop equipment second to none. They continue to supply the majority of the biggest name teams in both top fuel and nitro funny car with products that are put to the test under the harshest conditions every weekend. And continue to meet or exceed those expectations consistently! Check out the following quality product sure to deliver both unmatched service and a professional image your race team deserves...
Cylinder Head Work Stand - Triple-T
Servicing your cylinder heads has never been easier with the help of this brand new Cylinder Head Work Stand - Triple-T that can service intake or exhaust without ever removing the head from the stand. And it rotates 360° with 5 different pitch positions. It's made to last from heavy duty steel with a nickle plate finish. And equipped with 4 mounting holes for easy installation on your workbench or pit table. This one's the choice of champions and ready to join your team today!
Cylinder Sleeve Flex-Hone Tools
"Nitrolink" carries the popular bore sizes needed, so one of these Cylinder Sleeve Flex-Hone Tools can help make that job a little easier to deal with. They offer a quick, consistent "clean up" by removing peaks and imperfections on your cylinder walls for better performance! They're self-centering and self-aligning to the bore with each of the abrasive pads having independent suspension, allowing them to compensate accordingly to correct wear areas for a superior even surface finish. When ordering please use your actual cylinder inside diameter, as all Flex-Hones are produced over-sized and will adjust to work with your size sleeve.
Please specify bore size needed in the "options" menu below.
Deluxe Digital Leak Down Testers
If you're looking for a top quality tool with precision accuracy then consider one of these brand new Deluxe Digital Leak Down Testers to add to your racing operation! Loaded with all the extras you would expect in a top of the line tool, this model provides easy-to-read digital numbers that read within 1/2 of 1% percent accuracy making it much more accurate than traditional testers. It's the best way to check for bent or leaking valves, bad ring seal, or even leaking head gaskets. Both gauges feature rubber bumpers for extra added protection and are back lit for easy legibility and equipped with low battery indicators. Outfitted with a control inlet valve to avoid shock to the gauges when air is turned on, to help provide a more accurate reading, easier use and longer gauge life. It comes complete with either a 12mm, or 14mm spark plug connector and hose. And includes it's own protective storage case for a very nice package deal. Now you know exactly where to go for all the cool higher end racing components... Nitrolink!
Choose either 12mm, or 14mm spark plug size in the options menu below.
Dial Indicator Kit for Valve Spring Tester
If you're thinking about purchasing one of the Bench Top Valve Spring Testers we sell, or already have one... Then check out one of these brand new Dial Indicator Kit for Valve Spring Tester that can be easily added for optimum precision accuracy. It's allows you to check your installed height, or coil bind while you're testing for spring pressure without having to do it old school by using a micrometer. It installs quickly with a very small amount of light grease and your 3/16" hex with a 7/16" open end wrench to set the stop. Check out all the other specialty pit tools available right here, designed specifically to make your job that much easier!
Valve Spring Tester (in photo) sold separately.
Digital Torque Wrench Tester
At the race track or back at the race shop, it's critical to be able to reach for a torque wrench that reads accurately every time you use it! Consistency wins races and this brand new Digital Torque Wrench Tester is the exact item needed to keep tabs on how consistent your torque wrench calibration is reading and when it's time to send out for service. This handy tool accommodates your 1/2" drive torque wrenches and has a push button conversion foot pounds to inches mode and a peak hold feature that saves your maximum reading. It's equipped with a back lit read out screen for night use and powers up using one standard 9-volt battery. Now you know where to go for all your specialty pit tools... Nitrolink!
Price: $545.00
Please call: (916) 425-1427 anytime to order.
Digital Valve Spring Tester
Efficiency at the track, as well as back at the race shop has always been a key component to winning races! And having access to the right tools to accomplish certain jobs quickly and easily makes all the difference! This brand new Digital Valve Spring Tester is sure to deliver everything you would expect, and then some... This quality unit is made of 6061 T-6 billet aluminum and equipped with 2" diameter plates that can handle almost any spring on the market and has a 5" travel capacity. The easy access controls on the front of the tester, along with the large, easy-to-read numbers on the back-lit screen makes it a breeze to run thru a set of springs in no time. It's capable of testing springs up to 1500 lbs; in 1 pound increments, with a digital travel readout in .001" increments. Equipped with a rotatable adjustable stop for fast measuring of open and closed spring pressures. And 3 mounting locations on the handle allow you to adjust the length for increased torque. The simple to use travel stop with 2 set screws is perfect for setting an exact position, allowing repeated testing at a specific installed spring height, or wide open lift (near coil bind). This unit is switchable from pounds to kilograms and operates on one 9V battery that's also included. Order one here today, then get ready to go to work!
Double End AN Wrench Set - 7 Piece
"Nitrolink" also offers this style Double End AN Wrench Set - 7 Piece for a hassle-free environment at your race shop the next time you decide to assemble hose ends, or check all the lines on your race car. This 7 piece set, (3 AN to 20 AN) is made of 6061-T6 billet aluminum. The contoured edges make them comfortable to use. And the shorter design length helps to prevent over-tightening your hose ends. All wrenches are anodized, color coded and numbered for quick easy identification. And the perfect addition to any pit tool box!
Double End Pro Series AN Wrench Set
The exact same quality, strength and durabilty is offered here with less wrenches to carry! This anodized Double End Pro Series AN Wrench Set is made by XRP and works with the swivel nuts on hose ends. Each of the (4) wrenches are color coded so you know exactly what wrench to reach for to get the job done quickly. And the fully radiused edges offers a comfortable grip second to none. This set is made from heat treated 6061 aluminum alloy for lasting performance. And includes sizes: (-3, -4) ( -6, -8) (-10, -12) (-16 & -20). Now you know exactly where to go for all your specialty pit tool needs! GoNitrolink.com
Dual Feeler Gauge Handles
It's all about choices for our valued customers! So, here's one more style of billet Dual Feeler Gauge Handles to consider if you prefer using the small style that holds 2 separate gauges on the same handle. They're strong, durable and made of billet aluminum to help run thru a set of valves quickly without having to fumble with 2 separate gauges . They measure 3" x 1.25" x .5" total and can accept various sizes of 1/2" wide feeler gauges (not included) depending on your application. And can be stacked 3-4 gauges high if you choose. Ordering made simple, 24/7 right here on our website! GoNitrolink.com
Choose either blue, or red in the "options" menu below.
Dzus Fastener Spring Adjuster
"Nitrolink" is your one stop shop when it comes to hard to find specialty pit tools for your race team... So, check out this Dzus Fastener Spring Adjuster specifically designed for one job! To get those wires that your Dzus Fasteners grab on to adjusted, so they fit just right. This awesome tool is designed to pull on the spring in either direction, to loosen or tighten it making minor adjustments to fine tune the fit of your quarter turn Dzus Fasteners without kinking or breaking the springs. It's billet aluminum body, steel shaft and plastic adjustment knob make it durable, quick and easy to use. Once again, the right tool to get the job done correctly!
