Taylor Blower Bag & Restraint
Outfit your ride with this upgraded Taylor Blower Bag & Restraint set-up that's up for grabs today!!! Install or remove it easily on your Nostalgia Nitro Funny Car or Top Fuel Dragster, Blown Alcohol Altered, Supercharged Gas Dragster, Drag Boat, Tractor Puller and so on...
This one's equipped with current cert tags, is in excellent shape and can work with many of the different brands of 6-71 Superchargers on the market. It's the upgraded Top Fuel model that meets the highest SFI 14.3 spec for Blower Restraints. Or, if you're running an alcohol car that requires the lower grade 14.2 Blower Restraint set-up, then you're in luck! Because this one will pass tech for you as well, no problem. The nomex cover and all straps are in nice shape with normal minimal wear. Top Plate is slightly used, in nice condition and free of any stress cracks or damage. And measures the standard 20 1/8" long by 10 5/8" wide. With the Blower opening measuring 10" long by 4 1/2" wide. PLEASE NOTE: Includes everything in the photos. Header Brackets and Pins are not included. So here's your chance to replace that crispy worn out Blower Bag on your race car... And save your team several hundred bucks at the same time by ordering everything right here!
Brand new this exact set-up will run you right at $1,850 bucks without the brackets & pins! But don't even think of spending that much when you can pick this one up right here for a fraction of the cost of new... Quality racing components + Unmatched customer service = GoNitrolink.com
Price
$375.00 Original price was: $375.00.$195.00Current price is: $195.00.
Total
$375.00 Original price was: $375.00.$195.00Current price is: $195.00.
Another BRAND NEW item... Without the brand new price!!!
Taylor Blower Manifold Restraint
If you're running an AJ set-back hemi blower manifold and are looking for a brand new Taylor Blower Manifold Restraint then lets save you some money right here! This one's made of silver kevlar and nomex material and designed to work with the newer style round burst panel. It's been sitting around the race shop as a spare, but was never used. It's equipped with SFI 14.5 tags that are expired, however this item is guaranteed to re-cert or your money back. It has also been priced accordingly so buy here today and save!
We offer a complete line of all Taylor Motorsports Products!
Taylor Engine Diapers
For the best fit and lightest on the market, choose Taylor Engine Diapers to get the job done right the first time! These lower engine restraints meet or exceed SFI 7.1 specs and are custom made to fit your engine tightly. Unlike some of the "one size fits all" units that are offered elsewhere, these were designed to install easily or be removed quickly. And are equipped with removable absorption liners that can be replaced in a flash. Order yours today with either an oil repellent nylon, or upgraded light weight kevlar outer shell... Then start loading up for the next race!!!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Taylor Motorsports Products!
Taylor Pilot Chute
Top of the line products made by racers for racers is what you'll find right here with this brand new Taylor Pilot Chute that's the new current style, now required because it's easier to spot on the race track by officials if it becomes detached. This one works with the 12' Taylor Crossform Chute and comes complete with attachment line and packing string. Help keep your Chute in the proper condition required to help it perform at its best on race day. So, if you need one... Here it is! If you have one... Then don't forget your spare! Ordering made easy, 24/7 right here! GoNitrolink.com
"Nitrolink" offers a complete line of all Taylor Motorsports Products!
Taylor Reverser Blanket
If you're race car's equipped with a Moore Performance Reverser, then let's set you up with the exact component needed to help your team roll through tech that much quicker! This brand new Taylor Reverser Blanket was specifically designed to fit like a glove. It's light weight, made of kevlar and installs or removes quick and easy. It's equipped with a fresh SFI 4.1 tag, making it NHRA "tech friendly" and the most popular choice of many of the Top Fuel Dragster and Nitro Funny Car teams on tour. If you're looking for a nice clean well fitting product, then you just found it right here! Order quality racing components 24/7 on our website! GoNitrolink.com
We offer a complete line of all Taylor Motorsports Products!
Taylor Supercharger Restraint
If you're looking for unmatched quality that's second to none when it comes to Blower Restraints, then take a look at one of these Taylor Supercharger Restraint set-up's designed to fit any 6-71 to 14-71 Supercharger on the market. Available in either SFI 14.2 or SFI 14.3 spec, these blower bags are made of kevlar inside with a nomex outside. Injector straps, top blower restraint plate with straps, bottom manifold plate, 4 header brackets, 1 bell housing bracket, and 5 bracket pins, are also included to wrap up this very special package. Custom made for Nostalgia Top Fuel or Nostalgia Funny Cars running a 6-71 Blower, all the way up to Top Fuel Dragsters and Nitro Funny Cars running the 14-71 size. Quality and craftsmanship right here, so come and get it!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
We offer a complete line of all Taylor Motorsports Products!
Taylor Transmission Blanket
If you've been shopping around for this next item, then keep in mind a proper fit is key to a long lasting component that will provide years of service if maintained properly... This Taylor Transmission Blanket is quality craftsmanship at it's finest! It's durable construction, both inside and out are sure to meet all you're expectations. It's NHRA "tech friendly" with SFI 4.1 tags and can be ordered to fit all Lenco CS-1, or CS-2, (2, 3, 4 or 5 speed) transmissions. As well as B&J 2 speed, or big boy 3 speed transmissions. All are equipped with handy grip handles on each end for easy transmission installation or removal in between rounds. And can be ordered in either an oil repellent nylon or upgraded light weight kevlar outer shell... One more quality product, for your quality race team!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Tel Tac II Digital Tachometer
Small, light weight and easy to read on the starting line! This brand new Tel Tac II Digital Tachometer is sure to provide your crew chief with the exact data needed to make any last second idle adjustments right before you bump it in! Equipped with an LCD digital readout and "telltale" memory, it's easy to configure and compatible with most engines and ignitions, to include MSD Pro Mag 44's, Vertex and Mallory Magnetos, or battery powered ignition systems. It turns on automatically when the engine is started and reads RPM in hundreds, from 500 RPM to over 12,000 RPM on V-8 engines, and to 15,000 RPM on smaller cylinder engines. After the engine's shut off, the highest RPM attained is shown for 30 minutes. This unit is powered by a 9-volt alkaline battery that should last for hundreds of hours and has a low battery warning when it's time to be replaced. And it comes complete with a wiring harness, mounting plate and instructions. Please note: This item will not work with odd fire V-6, V-4 with Vertex internal coil magneto, or 4-cylinder engines with EFI... Quality racing components available right here on our website 24/7! GoNitrolink.com
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
TFX '92 Complete 426 Hemi Gear Drive
Take a look at this slightly used TFX '92 Complete 426 Hemi Gear Drive that works with your TFX '92 blocks only... It's the 48° raised cam style, is in nice shape and includes the front cover, upgraded titanium crank hub, crank seal & housing, cam gear, cam hub, idler gear kit, crank gear, degree wheel, crank bolt and hardware. This set-up could work well on your Top Fuel or Nostalgia Dragster, Nitro or Alcohol Funny Car, AA/Fuel Altered, Pro Mod, Drag Boat, Tractor Puller and so on... The billet aluminum front cover is in nice shape with only minor nicks and scratches from normal minimal use. And works in conjunction with your BAE or AFT fuel pump extension (sold separately). The steel cam gear is the 11 hole style, also in nice shape and free of any damage with all teeth looking good to go. The crank gear included is dual keyed and the idler gear also gets the thumbs up. The cam hub is equipped with a 1/2" size hex and the RCD dual keyed crank hub and degree wheel are ready to install using the standard size crank bolt that's also included. This set-up can be used on both supercharged or un-blown applications. However, it will not adapt to your application if you're running a BAE or Keith Black block.
Why Buy New??? Expect to pay close to $1,800 Bucks for all these components buying new elsewhere. But don't even think about spending that much when you can pick this one up right here for a fraction of the cost... And have hundreds of dollars left over for other weekend expenses! This unit is available immediately and ready to ship out today...
Quality pre-owned & new racing components 24/7 right here! GoNitrolink.com
"Nitrolink" offers a complete line of all Dan Olson Products!
TFX Dragster Oil Pan - Olson
If you're running a TFX block then this brand new dragster style TFX Dragster Oil Pan - Olson style offers quality and craftsmanship second to none! Taking into consideration the extreme racing conditions that only an 11,000 horsepower nitro engine can produce, installing a top of the line product is a must to keep going rounds! All nitro and alcohol pans features an o-ring equipped 3/8" billet rail, built in trap door baffle, scraper, front side and rear shelves, removable dzus fastened windage tray and large size drain plug for quick oil changes in between rounds. This style pan has a 12 qt capacity and measures the standard (23 7/8" x 11 1/4") dimensions and has a 6.5" depth in the front and 7.5" depth in the rear. And comes complete with a removable aluminum oil pick-up and your choice of either a -16, or -20 oil hose fitting. Optional weld-in aluminum oil pick-ups also available. Order yours today!
"Nitrolink" offers a complete line of all Williams Products!
TFX Dragster Oil Pan - Williams
If you're running a TFX block then this brand new TFX Dragster Oil Pan - Williams style is a great choice when it comes to performance and durability! And as many times as one of these goes on and comes off your race car, then installing a quality product is a must to keep going rounds! All nitro and alcohol pans features a 3/8" billet rail, built in trap door baffle, scraper, removable windage tray and large size drain plug for quick oil changes in between rounds. This style pan has a 11 qt. capacity and measures the standard (23 7/8" x 11 1/4") dimensions and has a 6.5" depth in the front and 7.5" depth in the rear. And comes complete with a weld-in aluminum oil pick-up and can be ordered with an optional o-ring groove and pick-up fitting (not included). Choose either a -16, or -20 pick up bung size and we'll get one started for your team today! Price: $724.95
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Dan Olson Products!
TFX Funny Car Oil Pan - Olson
If you're running a TFX block then this brand new funny car dry sump style TFX Funny Car Oil Pan - Olson style offers quality and craftsmanship second to none! Taking into consideration the extreme racing conditions that only an 11,000 horsepower nitro engine can produce, installing a top of the line product is a must to keep going rounds! All nitro and alcohol pans features an o-ring equipped 3/8" billet rail, built in trap door baffle, scraper, front side and rear shelves, removable dzus fastened windage tray and large size drain plug for quick oil changes in between rounds. This style pan has a 8 qt capacity and measures the standard (23 7/8" x 11 1/4") dimensions and has a 4 9/16" depth in the front and 6 1/8" depth in the rear. And comes complete with a removable aluminum oil pick-up and your choice of either a -16, or -20 oil hose fitting. Optional weld-in aluminum oil pick-ups also available. Order yours today!
