"Nitrolink" offers a complete line of all System 1 products!
System 1 Billet Dry Sump Hemi Oil Pump
Once you tow up, your attention is directed to making sure your race car starts... After that, you better have good oil pressure, right! This System 1 Billet Dry Sump Hemi Oil Pump is the exact same component many of the pro nitro teams on tour are using for several reasons. They're outstanding flow characteristics, versatility and long-term dependability are counted on weekly to keep those 11,000 horsepower engine alive! And could work just as well for your team! They can be set up to work on your "Big Show" Funny Car, Alcohol Funny Car, Pro Mod, etc. And can be ordered in 2 basic sizes, either 1.8 or 2.1 gear sizes. Pump is loaded with you're standard 5/16" size drive and equipped with an AN -8 size o-ring boss port for functions such as oil pressure gauge, Racepak or other on-board computer sensor, or rear oiling. And can be set with two adjustable pressure ranges (80-125 psi “low” and 125-250 psi “high”) and also includes two AN -12 IN/OUT fittings for the filter and stainless hard loop line. Give us a call with any questions as we're here to help anytime!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all System 1 products.
System 1 Billet Wet Sump Hemi Oil Pump
Once you tow up, your attention is directed to making sure your race car starts... After that, you better have good oil pressure, right! This System 1 Billet Wet Sump Hemi Oil Pump is the exact same component many of the pro nitro teams on tour are using for several reasons. They're outstanding flow characteristics, versatility and long-term dependability are counted on weekly to keep those 11,000 horsepower engine alive. And could work just as well for your team! They can be ordered in the following: 1.8, 2.1, 2.4, 2.7, or 3-inch tall gear size, to provide the desired volume (up to 50 GPM) and can be set with adjustable pressure ranges (80-125 psi “low” and 125-250 psi “high”) for virtually every application from fuel injected A/Fuel cars, to nitro-burning supercharged “Big Show” cars. Choose from three different style oil pick-up fittings; AN -16, AN -20, or special AN -16 quick-disconnect fitting for use with System 1’s special scavenging hose. This pump is equipped with an AN -8 size o-ring boss port for functions such as oil pressure gauge, Racepak or other on-board computer sensor, or rear oiling. And also includes two AN -12 IN/OUT fittings for the filter. They're machined for an AN -20 fitting on the scavenge side of the pump (AN -16 to AN -20 fittings available).
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all System 1 products!
System 1 Inline Fuel Filters
The distance between your fuel tank and the injector is not always as clean as it needs to be... This problem can cause a wide range of issues including lean cylinders, fuel pump, or barrel valve damage, and so on! So, lets offer a wide variety of brand new System 1 Inline Fuel Filters to fit your specific race application. This quality component can be ordered to work with nitro, alcohol, or gas. And is offered in either a 2 inch, or 2 1/4 inch diameter, with a length choice of 6, 9, or 11, inches long. The removable filter element makes it easy to service in between rounds and see exactly what's not going into your fuel system. Yours can be assembled with either a 35-micron filter, excellent for use in high fuel demand carbureted applications and nominally flows 24 GPM. Or, the 75-micron filter that's ideal for use between the pump and barrel valve. Set up with your choice of AN -6, AN -8, AN -10, or AN -12 fittings. And available in either red or black. Order yours today!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Price
$175.00 – $177.00Price range: $175.00 through $177.00
Total
$175.00 – $177.00Price range: $175.00 through $177.00
"Nitrolink" offers a complete line of all System 1 products!
System 1 Inline Oil Filters
Here's another quality built component that's perfect if your running the heavier 50, 60, or 70-wt. racing oils in your race car and have a limited amount of space to work with. Install one of these brand new System 1 Inline Oil Filters designed to work with either wet sump systems, or installed between the pump and sump tank if you're running a dry sump set-up. The housing is made of 6061-T6 billet aluminum and was intended to be serviced after every run, with the removable 75-micron filter element making it easy to see exactly what's happening inside your engine. It works with nitro, alcohol, or gas and can be ordered to work with either AN-10, or AN-12 size oil lines. And available in either red or black. Order one today... And it's on the way!
Choose your fitting size, fuel preference and color in the "options" menu below.
Another BRAND NEW item... Without the brand new price!!!
System 1 Oil Filter
Looking out for our valued customers is what we do best! So, lets save you some money right here by offering this brand new System 1 Oil Filter with a nice discount! This one's the inline style, designed to work with either wet sump systems, or installed between the pump and sump tank if you're running a dry sump set-up. The housing is made of 6061-T6 billet aluminum and was intended to be serviced after every run, with the removable 75-micron filter element making it easy to see exactly what's happening inside your engine. This one's set up to works with nitromethane and equipped with the larger AN-20, fitting size on both ends. The filter itself measures 9" long, is anodized red and ready to go racing out of the box! This exact set-up goes for right at $250 bucks... And is the only one available at this price! Save more, Race more, Win more... GoNitrolink.com
Price
$538.00 – $547.00Price range: $538.00 through $547.00
Total
$538.00 – $547.00Price range: $538.00 through $547.00
"Nitrolink" offers a complete line of all System 1 products!
System 1 Pro Series Oil Filter & Mount
Unmatched quality and craftsmanship second to none! You're looking at one of, if not the best oil filtration set-up's on the market!!! This combination System 1 Pro Series Oil Filter & Mount is made of billet aluminum and NHRA approved for Top Fuel and Nitro Funny Car competition. Or, available for Top Alcohol Dragsters, Funny Cars, Pro Mod, etc. It's anodized black for that cool stealth look. And was designed with the filter canister housing and mount permanently affixed as one unit. The reusable filter element inside can be easily inspected, or serviced by simply removing the inspection cap. And it's equipped with the correct 75-micron element for use with heavy weight oil. The mount has two 5/16 -18 threaded holes on a 2” center and two AN -12 fittings on top. Order one today... And the problem goes away!
Choose your fuel application in "options" menu below.
Price
$346.00 – $366.00Price range: $346.00 through $366.00
Total
$346.00 – $366.00Price range: $346.00 through $366.00
"Nitrolink" offers a complete line of all System 1 products!
System 1 Pro Series Spin-On Oil Filter
Unmatched quality and craftsmanship second to none! You're looking at one of, if not the best oil filtration set-up's on the market!!! This brand new System 1 Pro Series Spin-On Oil Filter is made of billet aluminum and can be used on supercharged, nitro-burning, injected nitro, supercharged alcohol, or gas applications. It's anodized black for that cool stealth look, with a reusable filter element inside that can easily be inspected or serviced by simply removing the inspection cap. It's equipped with the correct 75-micron element for use with heavy weight oil. Or, can be ordered with a 45-micron element if you're running a lighter weight oil. And o-rings are also included. Another quality product to add to your race team!
Choose your element size & fuel application in "options" menu below.
T Handle Torquing Spark Plug Wrench
Probably one of the most popular specialty pit tools would have to be a
T-Handle Torquing Spark Plug Wrench. And when it comes to changing spark plugs quickly and easily, this style is exactly what your race team needs to get the job done with the same efficiency and accuracy as the pro nitro teams on tour! This tool is designed to offer a correct balance while in use and allows the user to preset their desired spark plug torque spec. Once that's reached, the handle clicks and your done! This is the perfect solution to help do away with those costly repairs after accidentally blowing out the treads on your billet cylinder heads. They're powdercoated black to prevent scratching and can be ordered to fit your common 13/16" size plugs, or the smaller 5/8" size peanut plugs... When it comes to racing pit tools, now you know exactly where to go for all the cool items! GoNitrolink.com
Choose size needed in the "options" menu below.
T-Handle Spark Plug Wrench
The perfect item to get the job done quickly in between rounds... This brand new T-Handle Spark Plug Wrench is anodized black and works with your standard 5/8" or 13/16" size plugs. It measures 15 3/4" long with a 9 3/4" handle at the top and is the standard, non-torque model, for all our valued customers on a budget. Quality built and ready for race day, this plug wrench should be in the tool box of every hemi race car owner on the planet! Save more, race more, win more! GoNitrolink.com
Choose either 5/8" or 13/16" plug size in the "options" menu below.
T-Handle Valve Cover Wrench
This brand new stainless T-Handle Valve Cover Wrench is one more item that's sure to help keep you're race team efficient on race day! The perfect balance on this wrench allows for quick removal, or installation of all valve cover nuts in no time! This high quality tool comes in either 7/16" or 1/2" size and is exactly what's needed to get the job done right! Helping your team organize for the race weekend is what we do best! GoNitrolink.com
Choose either 7/16" or 1/2" size in the "options" menu below.
TAK Titanium Header Brackets
GoNitrolink.com for both racing products and customer service taken to the next level! And if you're looking for some state of the art TAK Titanium Header Brackets that will perform on the racetrack as well as they look, then your shopping in the right place! These are slightly used, made of light weight titanium and profiled like no other set on the market. They install easily on your header studs on your cylinder heads and work in conjunction with your blower restraint set-up. They're sold separately and if you need the exact size quick release pins that go with these brackets, we can do that as well! Order both quickly and easily right here!
Price: Only $79.00 each.
We offer a complete line of all Taylor Motorsports Products!
Taylor Engine Diapers
For the best fit and lightest on the market, choose Taylor Engine Diapers to get the job done right the first time! These lower engine restraints meet or exceed SFI 7.1 specs and are custom made to fit your engine tightly. Unlike some of the "one size fits all" units that are offered elsewhere, these were designed to install easily or be removed quickly. And are equipped with removable absorption liners that can be replaced in a flash. Order yours today with either an oil repellent nylon, or upgraded light weight kevlar outer shell... Then start loading up for the next race!!!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
