534 ITEMS
Sort
Co2 Air Bottle
Anodized black for that awesome stealth look!!! This slightly used Co2 Air Bottle is ready to go on tour with your race team as soon as you click "Buy it Now! This one measures 9 3/4" tall including the valve, with a 3" diameter. Both the bottle & valve are in nice shape with no damage or repairs. And the anodized finish is exactly what's needed to make this quality component look that much better! Racers helping Racers do what they do best! GoNitrolink.com
Cold Sleeve Puller Jack
At "Nitrolink" it's all about offering all our valued customers different options! And when it comes to replacing sleeves at the track here's a great alternative! This brand new
Cold Sleeve Puller Jack works fantastic when it's time to get the job done quickly and easily. They work with your air impact gun, can be ordered to fit any sleeve size and don't require you to heat up the block prior to sleeve extraction. This top quality tool is strong, durable and small enough to store away easily. Order the right tool for the job right here today, for a happier sleeve pulling experience tomorrow!
Choose bore size needed in the "options" menu below.
Custom bore sizes also available. Call for details.
We offer a complete line of all Pit Pal products!
Collapsible Chair Holder
Nitrolink is excited to offer your race team top quality Pit Pal race trailer accessories for the exact same price as the manufacturer! And when it comes to keeping your race trailer organized and efficient, then a brand new Collapsible Chair Holder just like this one is sure to check all the boxes! It's heavy duty, made of durable aluminum, hand welded and built to last. It stores up to 3 chairs and the great news is you can mount the upper piece to a height that suits your specific needs. Measurements are 22.5"W x 3.75"H x 6.75"D plus, it can work just as well in your race shop, or garage... Shop here 24/7 for all your Pit Pal needs! GoNitrolink.com
Chairs not included.
Price
Original price was: $239.00.$214.95Current price is: $214.95.
Total
Original price was: $239.00.$214.95Current price is: $214.95.
Compact Pit Area / Race Trailer Air Mover Fan
900 CFM High Volume Air Flow out of a 1/4 horsepower motor that's compact and uses only 2 amps when running!!! I think you know exactly how to put this Compact Pit Area / Race Trailer Air Mover Fan to work!!! The advanced blade design inside produces a high airflow, while running quietly and efficiently. It's unique shape allows for multiple angle adjustments to direct air flow directly where it's needed. It's low profile design is perfect in between rounds for cooling down race engines, transmissions, race trailers, pit areas, etc. Or, it works equally as well for cooling & ventilation at the race shop. It's equipped with an extra 12 amp power outlet to run a drop light, electric power tool, phone charger, or another fan. And the 15' long cord and built in carry handle make for a very nice package. Overall dimensions are 19.5" long x 17.5" wide x 8.6" tall, plus it weighs only 16.5 lbs. Order right here today... Your crew will be happy you did!
Compact Valve Core Tool
No rocket science here! Just one more well made quality tool to add to your racing operation! This brand new Compact Valve Core Tool is made of billet aluminum and equipped with a steel tip for durability. It's knurled on one end and drilled for your key chain, etc; on the other. It's small, light weight and not a bad idea to have with you while you're waiting in the lanes... Just in case!
Price
$5,795.00
Total
$5,795.00
Complete 426 Hemi Rocker Assembly
So, if you're running a Nostalgia Nitro Funny Car or Top Fuel Dragster, AA/Fuel Altered, Doorslammer, Drag Boat, or Tractor Puller on Nitro, Alcohol, or Gas, then check out this brand new Complete 426 Hemi Rocker Assembly that's definitely some of the best equipment money can buy for strength, durability and performance.
This standard ratio set, loaded with brand new billet stands can be ordered to works with either 9/16" or 1/2" head studs. Both new intake and exhaust rockers are made by Manton and are the upgraded billet pressure fed oiler style and one of the strongest on the market. Intakes are the popular 1.7 ratio, with the exhaust offering the standard 1.65 ratio. All rockers are equipped with the larger 7/16" adjusters with the 3/8 ball, however can be ordered with a smaller ball size to match your existing pushrod cup size if you choose. The new Manton steel shafts have a .250 wall thickness and the new adjusters, nuts, shims, hardware and springs are included as well. This set-up works with your BAE, Dart, or Alan Johnson fuel heads that bolt up to your TFX, BAE, or Keith Black cast or billet block. However, if you're running "fat heads" like what the A/Fuel cars are running, (such as Brad 4's, 5's 6's, etc.) these will not adapt to your application. This set-up is complete out of the box and ready to bolt on and go racing...
Top of the line racing components + Unmatched customer service = GoNitrolink.com
Price
Price range: $291.43 through $410.41
Total
Price range: $291.43 through $410.41
Complete Fuel Hydrometer Kit
Over the years, we have found premium alternatives to every component and had them assembled all together right here to offer this brand new Complete Fuel Hydrometer Kit for all our valued customers! Other brands just don't deliver when it comes to durability, accuracy and clear readability. So, this kit includes a large diameter beaker that's perfect for pouring fuel in an out of and is less prone to tipping over. The durable stainless steel dial thermometer included is equipped with a fuel-proof bezel and replaces the fragile "old school" mercury glass thermometer. The Hydrometers are finely graduated and deliver a clear, accurate nitromethane reading from 0% to 100% if you choose, (with the 4 hydrometer kit). If the full range is not required, then no problem... Just choose the smaller size kit with the range you need and you're all set! All kits include a large fuel-proof polyethylene padded custom die-cut foam case, along with a nitro chart and instructions. Here at "Nitrolink" we sell you just what you need and not what you don't!
Choose the number of Hydrometers needed & range(s) in the "options" menus below.
(0%, Gas & Methanol) (2% - 35%, Nitro) (32% - 60%, Nitro) (60% - 100%, Nitro)
Compression Testers
Next time reach for one of these brand new high quality Compression Testers when your looking for a quick, easy, less expensive way to hopefully catch serious engine damage before it occurs! This one's the 0-300 psi model and one way to check for bent or leaking valves, bad ring seal, or even leaking head gaskets. It's equipped with a rubber bumper guard, quick disconnect hose for easy installation and removal, along with a pressure relief valve and 14mm plug adapter. GoNitrolink.com for all your specialty pit tools!
Connecting Rod Checker - Hemi
This Connecting Rod Checker - Hemi style allows you to monitor your connecting rod lengths so you know when it's time to re-size or replace them with a fresh set before it's to late! Don't risk the possibility of catastrophic engine failure by running your rods to long. This one's brand new and comes complete with a dial indicator included. And small enough to stow away nicely in your trailer or race shop. Pair this item up with one of our Rod Bolt Checker Tools to help make your preventative maintenance program that much better! When it comes to specialty pit tools... "Nitrolink" has you covered!
Rod in photo is for display only.
Connecting Rod Vise
As we all know, aluminum rods can be a handful to hold on to while your servicing them in between rounds, or back at the race shop... So how about a solution! This super handy Connecting Rod Vise was designed to securely hold one or more of your aluminum rods while you service them, to help prevent the risk of damage. It's perfect for removing the caps, inspecting or changing rod bolts, checking rod clearances, polishing, or machining. It's strong, durable, made of billet aluminum, anodized black and can be permanently mounted to your work bench, or used with your shop vise. Inside working area is approx 4 3/4" x 2" with an overall height of 10" total by 7" wide, by 2" deep. Order one today... Problem goes away!
Price
Call for Price
Total
Call for Price
"Nitrolink" offers a complete line of all Triple-T Race Products!
For over 25 years Triple T Race Products has been on the front line providing top quality pit area and race shop equipment second to none. They continue to supply the majority of the biggest name teams in both top fuel and nitro funny car with products that are put to the test under the harshest conditions every weekend. And continue to meet or exceed those expectations consistently! Check out the following quality product sure to deliver both unmatched service and a professional image your race team deserves...
Crank Gear Puller Tools - Triple-T
Use one of these handy Crank Gear Puller Tools - Triple-T once and wonder how you ever got along without it! Designed to remove your crank gear safely and efficiently this brand new high quality tool is made to last. It's steel construction is ready to make short work of this task every time you reach for it! We're happy to help anytime with all your specialty pit tool needs! GoNitrolink.com
Price: $295.00 each.
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Crower Pedal Clutch
We all know the importance of having a good clutch program in place and how setting your race car up with the correct components right from the start can save you countless hours in the pits, multiple runs on the track and a whole lot of frustration. And if your looking to potentially save thousands of $$$'s at the same time... Then we might just have the solution right here!!! This Crower Pedal Clutch could work on your nitro, alcohol, or gas burning front or rear engine Dragster, Funny Car, Altered, or Nostalgia A/Fuel Car. It's slightly used and in great shape. And in fact, has only 1 burnout on it since it was inspected. This one's the 10.7 size, equipped with the lighter weight aluminum pressure plate, flywheel and upgraded titanium donut. It's set up to run 3 disks (not included) and is the 6 stand model with the popular big stands and titanium adjusters. This set-up was recently certed, and is ready for showtime!!!
Why buy new???
So, if you've had a chance to shop around for a new Pedal Clutch... Then be prepared to spend right at $5,000 bucks or more for a set-up like this one! But don't even think about doing that if you're looking to save BIG time! This one will sell for half the cost of new, making this the perfect opportunity to save thousands!!!
Available immediately and priced to move.
There’s only 2 places you can go to get your “Official Nitrolink Racing Gear” and that would be either in our pit area, or right here on our website!
Check out these awesome looking Nitrolink Racing T-Shirts that are being offered right here before you can even get them at the race track… This first addition design is available at a lower than normal price to help introduce our brand new website and services to all or valued customers! These high quality custom printed shirts are made of 100% cotton and come in black with multi-color printing on both the front and back. Join our winning team today and show everyone you know exactly where to go for high performance nitro and alcohol racing components! GoNitrolink.com
