Slightly Used
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
MSD Pro Mag 44 Coils - Slightly Used
This next "Nitrolink" budget friendly item is sure to save you several hundred bucks by not having to buy new!!! We have quite a few of these MSD Pro Mag 44 Coils - Slightly Used (Part #8142) in stock and ready to ship. These current style coils were in service for a short time, and still have a lot of laps left in em! And the great news is they all have been thoroughly load bank and meter tested by MSD and have not been on a car since. All numbers etc; look good to go and all are in very clean condition, free of any damage and sold separately. No weak used up parts sold here!
"Nitrolink" offers a complete line of all MSD Products!
MSD Big Cap Conversion Kit - Pro Mag 44
If you're looking to change over the small cap on your Pro Mag 44 Magneto to the big cap style, then we're happy to help you with that right here! This MSD Big Cap Conversion Kit - Pro Mag 44 comes complete with all the components needed to do the job correctly. Upgrading to a larger diameter cap increases the distance between terminals and decreases the chance of crossfire or spark scatter, as well as a build-up of ozone inside the cap. Kit includes a big cap, larger rotor, cap base, and plug wire retainer.
Choose either black or red to match your other MSD components in the "options" menu below...
MSD Pro Mag 44 Points Box & Coil Kit
Top of the line quality components, at a money saving price is exactly what you'll find right here with this slightly used MSD Pro Mag 44 Points Box & Coil Kit that's sure to help you save both time and money ordering everything all in one place! This kit features a standard MSD #81453 Points Box that's the non-rev style, that connects quickly to your MSD Pro Mag 44 Magneto using a 4 pin Deutsch connector that's already installed. It's black in color, so it matches the MSD #81423 Pro Mag 44 Coil that's also included, for that awesome stealth look! Plus, all the mounting hardware, anti-vibration mounts, etc; are already installed on the funny car style aluminum mounting plate that's also included with the complete package. All components will be tested prior to shipping, so you know your money was well spent here. And get ready to save over $1,400 Buck not having to buy new elsewhere!
Racers helping Racers do what they do best... For Less! GoNitrolink.com
Price
$3,995.00 Original price was: $3,995.00.$3,495.00Current price is: $3,495.00.
Total
$3,995.00 Original price was: $3,995.00.$3,495.00Current price is: $3,495.00.
Used MSD Pro Mag 44 Kit
How about another "Super Saver Deal" right here for all you racers out there on a tight budget looking to save over $3,200 bucks not having to buy new!!!
Check out this slightly Used MSD Pro Mag 44 Kit that's ready to get the job done... And for way less! This one features the popular PN 8130 small cap style Magneto that's currently set up with the clock wise (CW) rotation. However, it can be changed to the hemi rotation easily if you choose. It's equipped with the RCD style drive set-up on the bottom. And also comes complete with a slightly used MSD Pro Mag 44 Points Box (PN 8145) and MSD Pro Mag 44 Red Coil (PN 8142). All items were recently tested and good to go, so you know your money was well spent here. All components are in nice shape, free of any damage or repairs with your common slight cosmetic scratches from normal minimal use. This complete kit is in stock, ready to ship today and definitely ready for showtime!
For this exact set up brand new, expect to pay right at $7,200 bucks! And that's not including the wire set. So, if you're looking to upgrade your existing ignition system, need a spare for race day, or about to start on that new project in the race shop... Then this money saving deal's definitely for you! Helping racers do what they do best... For less! GoNitrolink.com
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
RCD 426 Hemi Offset Mag Drive
How about a nice clean profiled product that's sure to offer that professional look your race team is known for! This slightly used RCD 426 Hemi Offset Mag Drive is in excellent shape and free of any damage with normal minimal wear. It's made of billet aluminum and can work with your TFX, BAE, Keith Black, or JP1 cast or billet blocks. And equipped with the RCD style gear, steel shaft with a 5/16" size hex for your oil pump and bronze gear, all in very nice condition. Brand new, these go for right at $1350 bucks! But not here... Not today! Install this one right out of the box, set your mag, then pull to the lanes! Helping your team race for less, is what we do best! GoNitrolink.com
Sitko Standard 426 Hemi Mag Drive
A top of the line quality component, with an affordable price!!! Is exactly what you'll find right here with this brand new Sitko Standard 426 Hemi Mag Drive that's ready to be pressed into service right out of the box! This single style mag drive is made of billet aluminum, with the standard offset. And is belt driven and equipped with a bronze gear and standard 5/16" stem. It comes complete with an idler bracket support and is ready to accept your MSD or Mallory Magnetos that are equipped with the Dunn style gear... Save more, race more, win more... GoNitrolink.com
Sitko 426 Hemi Mag Drive
If you're looking to simplify your ignition system, without have to run all the advanced and sometimes complicated timing control components then this brand new Sitko 426 Hemi Mag Drive just might be the answer. This top of the line quality component is the single mag, offset, air actuated style that allows you to retard your timing during the run either manually, or with the help of a simple timer system. It's made of billet aluminum, belt driven and equipped with a bronze gear and standard 5/16" stem. It comes complete with an idler bracket support and ready to accept your MSD or Mallory Magnetos that are equipped with the Dunn style gear. Hard to find racing components right here 24/7... GoNitrolink.com
MAKE OFFER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used MSD Pro Mag 44 Wire Retainer
Here's another popular item for all our valued customers on a budget! This slightly
Used MSD Pro Mag 44 Wire Retainer part #7409 is the perfect item to pair up with the Pro Mag 44 Big Cap. It's one and only job is to keep all wires securely attached to each wire terminal while you break the beams at the other end! It installs easily, removes quickly with mounting hardware included. Order today and save!
We offers a complete line of all PSI Supercharger products!
PSI Billet Mag Clamp
"Nitrolink" is your one stop shop when it comes to anything PSI! So why not let us help you keep your Magneto locked in place to help insure a consistent tune-up! This PSI Billet Mag Clamp is anodized black and offers quality second to none and installs and removes easily. It's made of light weight billet aluminum and comes complete with all hardware needed to keep your mag from moving during the run. Timing is everything on race day... And timing can't be more perfect to order one right here today!
We offers a complete line of all PSI Supercharger products!
PSI Mag Drive Bronze Gear Replacement
"Nitrolink" is your one stop shop when it comes to PSI replacement parts! So why not let us help you keep your Magneto performing at it's best to help get you in the winners circle! This
PSI Mag Drive Bronze Gear Replacement offers unmatched quality, is easy to replace and can save you a whole lot of grief on race day if you have a spare ready to put into service if needed. Race weekends are way to short to be put on the trailer early because you couldn't make the call, so don't forget your spares!
We offers a complete line of all PSI Supercharger products!
PSI Single Mag Drive Replacement Belt
"Nitrolink" is your one stop shop when it comes to PSI replacement parts! So why not let us help you keep your Magneto performing at it's best, to help get you in the winners circle! This PSI Single Mag Drive Replacement Belt is one of those items that can side line you quicker than your best E.T. And we sure don't want to see that! These Belts are easy to replace and can save you a whole lot of grief on race day if you have a spare ready to put into service if needed. Race weekends are way to short to be put on the trailer early because you couldn't make the call, so don't forget your spares!
We offers a complete line of all PSI Supercharger products!
PSI Dual Mag Drive Replacement Belt
"Nitrolink" is your one stop shop when it comes to PSI replacement parts! So why not let us help you keep your Magneto performing at it's best, to help get you in the winners circle! This PSI Dual Mag Drive Replacement Belt is one of those items that can side line you quicker than your best E.T. And we sure don't want to see that! These Belts are easy to replace and can save you a whole lot of grief on race day if you have a spare ready to put into service if needed. Race weekends are way to short to be put on the trailer early because you couldn't make the call, so don't forget your spares!
