Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Moroso Dry Sump F/C Oil Tank
If you're getting ready to start on that project in your race shop, or just looking to replace your current tank on your funny car or altered then this next item takes care of both! This nostalgia style Used Moroso Dry Sump F/C Oil Tank is sure to go easy on your check book! It's made of aluminium, anodized black and in good used shape with your common nicks, scratches, etc; from normal use. Tank measurements are: 12" tall in front, by 15" tall in the back, by 16 1/4" tall at its highest point by the cap and is 3 1/2" wide. It's free of any damage or repairs, has a 3 gallon capacity and equipped with inside baffles. Inlets on top and the drain plug bung on the bottom are ready to accept your -12 size fittings and drain plug, (not included) and the suction outlet on the back is the -16 size. Also included is a billet filler cap to wrap up this money saving deal!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used MSD Battery Packs & Charger Kit
Lets save you some money right here with this Used MSD Battery Packs & Charger Kit that helps power up your ignition management such as six shooters, power grid, etc. Each battery delivers 14.4 volts and all three items are in great shape and equipped with Deutsch connectors for a secure fit. This package comes complete with (1) MSD smart charger and (2) battery packs, one for the car and one for a spare. This kit will be sold with a fresh set of batteries, so rest assured your money will be well spent here!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used MSD Big Block Chevy Distributor
Here's one more item our BBC customers can now add to their spare parts inventory... This slightly Used MSD Big Block Chevy Distributor model #8558 is designed to work with your crank trigger system. This one's in great shape, equipped with a billet shaft, bronze gear and a price that's sure to make your wallet happy!
Price
$3,995.00 Original price was: $3,995.00.$3,495.00Current price is: $3,495.00.
Total
$3,995.00 Original price was: $3,995.00.$3,495.00Current price is: $3,495.00.
Used MSD Pro Mag 44 Kit
How about another "Super Saver Deal" right here for all you racers out there on a tight budget looking to save over $3,200 bucks not having to buy new!!!
Check out this slightly Used MSD Pro Mag 44 Kit that's ready to get the job done... And for way less! This one features the popular PN 8130 small cap style Magneto that's currently set up with the clock wise (CW) rotation. However, it can be changed to the hemi rotation easily if you choose. It's equipped with the RCD style drive set-up on the bottom. And also comes complete with a slightly used MSD Pro Mag 44 Points Box (PN 8145) and MSD Pro Mag 44 Red Coil (PN 8142). All items were recently tested and good to go, so you know your money was well spent here. All components are in nice shape, free of any damage or repairs with your common slight cosmetic scratches from normal minimal use. This complete kit is in stock, ready to ship today and definitely ready for showtime!
For this exact set up brand new, expect to pay right at $7,200 bucks! And that's not including the wire set. So, if you're looking to upgrade your existing ignition system, need a spare for race day, or about to start on that new project in the race shop... Then this money saving deal's definitely for you! Helping racers do what they do best... For less! GoNitrolink.com
MAKE OFFER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used MSD Pro Mag 44 Wire Retainer
Here's another popular item for all our valued customers on a budget! This slightly
Used MSD Pro Mag 44 Wire Retainer part #7409 is the perfect item to pair up with the Pro Mag 44 Big Cap. It's one and only job is to keep all wires securely attached to each wire terminal while you break the beams at the other end! It installs easily, removes quickly with mounting hardware included. Order today and save!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Oil Pan Pick-Up
If your looking for a replacement, then this slightly Used Oil Pan Pick-Up is priced to save you a few bucks not having to buy new elsewhere! It's made of aluminum and in great shape with no damage or repairs. And could work with most any brand oil pan that's set up to accommodate a removable style pick-up like this one. It's accepts a -20 fitting size, however can be adapted to the smaller -16 size if you choose. Go with "Nitrolink" as we're always here to help get you ready for race day!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Pac 1360 Valve Springs
Lets offer a nice set of Used Pac 1360 Valve Springs for all our valued customers on a tight budget. This set of (16) total steel double springs measures 1 1/2" O.D. and have an installed height of 400 lbs. @ 2.250 and a coil bind of 1.190 total. All were recently tested with good numbers and perfect for having in your race trailer as a spare set. At this price, you can afford to be prepared on race day!
Used PSI Set-Back Blower Snout & Coupler
When it comes to state of the art superchargers and components, PSI delivers unmatched quality and craftsmanship! And this slightly Used PSI Set-Back Blower Snout & Coupler is a perfect example! It works in conjunction with your PSI roots style supercharger that sits on top of your set-back style blower manifold. It's measures 11 1/2" long flange to flange and mounts to your front cover with 12 total 5/16" size bolts (not included). It's o-ring equipped on one side for a secure seal and utilizes the standard blower pulley bolt pattern on the other. The slotted area in front was designed to work with your snout clamp style belt guard (sold separately). And the steel shaft and coupler are also included to complete the package. This is the last one we have so if you don't want to buy new, then here's your chance to save... Order today!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 11mm - 35T - Blower Pulley
How about a slightly Used RCD 11mm - 35T - Blower Pulley that's ready for showtime! This one's an 11mm, 35 tooth, GT style made of light weight magnesium and designed to work with the popular 75, or 84 mm wide blower belts. Pulley measures 3 1/2" wide and could work on most any brand of 4-71, 6-71, 8,10,12, or 14-71 Superchargers on the market. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, Tractor Puller, Pro Street, or Hot Rod and DROP THE HAMMER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 11mm - 36T - Blower Pulley
If you're looking for a slightly Used RCD 11mm - 36T - Blower Pulley and looking to save a few bucks at the same time, then it's you're lucky day! This one's an 11mm, 36 tooth, GT style made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. Pulley is anodized black for the cool visual factor, measures 3 1/2" wide and could work on most any brand of 4-71, 6-71, 8,10,12, or 14-71 Superchargers on the market. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, Tractor Puller, Pro Street, or Hot Rod and DROP THE HAMMER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 11mm - 50T - Mag - Quick Change Pulley
How about a slightly Used RCD 11mm - 50T - Mag - Quick Change Pulley that's ready for showtime! This one's the GT, center flange model, that works with your quick change style crank hub and nut. It's made of light weight magnesium and designed to work with the popular 75, or 84 mm wide blower belts. And measures the standard 3 1/2" wide. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, or Tractor Puller and DROP THE HAMMER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 11mm - 50T - Quick Change Pulley
How about a slightly Used RCD 11mm - 50T - Quick Change Pulley that's ready for showtime! This one's the GT, center flange model, that works with your quick change style crank hub and nut. It's made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. And measures the standard 3 1/2" wide. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, or Tractor Puller and DROP THE HAMMER!!!
