568 ITEMS
Sort
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Hadman Front Motor Plate
If you're ordering parts to put a car together then here's a good place to start! This slightly Used Hadman Front Motor Plate is made of 1/4" thick aluminum. It measures 20 1/4" across center to center between notches and works with your 1 1/4" pipe size. We're always happy to help you take your first steps toward the winners circle!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Used Head Stud Nuts
How about a complete set of slightly Used Head Stud Nuts to help you stay within your racing budget this month for a change! This set of (26) total, are the 12 pt. style nuts that work with your 11/16" size socket. And fit your 9/16" fine thread size head studs. Add a can of peanut butter compound to your cart and you're all set for race day!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Used Head Stud Nuts
How about a complete set of slightly Used Head Stud Nuts to help you stay within your racing budget this month for a change... This set of (26) total, are the 12 pt. style nuts that work with your 11/16" size socket. And fit your smaller 1/2" fine thread size head studs. Add a can of peanut butter compound to your cart and you're all set for race day!
Another
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Kobelco Blower Front Cover
Check out this slightly Used Kobelco Blower Front Cover that's anodized and made of cast aluminum. This one's free of any damage or repairs and comes complete with a front cover bearing and pressure relief valve already installed. If this is your supercharger brand of choice we have a limited supply of items available right here. And once they're gone, they're gone for good!
Another
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Kobelco Front Bearing Plate
If you need one, then here it is! This Used Kobelco Front Bearing Plate is anodized and made of cast aluminum. This hard to find item does show some minimal wear and the bearings should be replaced but if you can't locate one, but need one we will price it accordingly. It utilizes the teflon strip feature for extra added performance and if this is your supercharger brand of choice we have a limited supply of items available right here. And once they're gone, they're gone for good!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Magnesium Dual Mag Support
It's durable, light weight and priced to move! This slightly Used Magnesium Dual Mag Support is in nice shape and works with your angled idler assembly. It was designed to lock down and support your dual mag drive and bolts behind your idler plate. The top, made of aluminum does not match the magnesium base. However, it's priced accordingly and sure gives you the opportunity to save!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Manley Exhaust Valves
See us first when it comes to stocking your race trailer up with the right amount of spare parts for the weekend! And here's a nice set of Used Manley Exhaust Valves with another budget friendly price tag, to hopefully help keep you going rounds on race day! This set of 8 Inconel valves are 1.925 diameter, with a 5.150" length. And are equipped with a 3/8" stem and a .250 tip, with a square groove. They were recently checked for straightness and are free of any visible signs of excessive heat. Just a couple clicks away and we'll handle the rest!
Price
$125.00
Total
$125.00
Another
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Milodon Swinging Oil Pan Pick-Up
How about this "old school" nice Used Milodon Swinging Oil Pan Pick-Up for all you true vintage racers that want to keep everything period correct! This one's for the 426 hemi, is slightly used and in nice shape and made of cast aluminum. It's ready to accept your two -12 o-ring pick-up fittings (not included) and has been sitting around the shop doing nothing and can't wait to get back to work!
Another
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Moroso Dry Sump F/C Oil Tank
If you're getting ready to start on that project in your race shop, or just looking to replace your current tank on your funny car or altered then this next item takes care of both! This nostalgia style Used Moroso Dry Sump F/C Oil Tank is sure to go easy on your check book! It's made of aluminium, anodized black and in good used shape with your common nicks, scratches, etc; from normal use. Tank measurements are: 12" tall in front, by 15" tall in the back, by 16 1/4" tall at its highest point by the cap and is 3 1/2" wide. It's free of any damage or repairs, has a 3 gallon capacity and equipped with inside baffles. Inlets on top and the drain plug bung on the bottom are ready to accept your -12 size fittings and drain plug, (not included) and the suction outlet on the back is the -16 size. Also included is a billet filler cap to wrap up this money saving deal!
Price
Original price was: $3,995.00.$3,495.00Current price is: $3,495.00.
Total
Original price was: $3,995.00.$3,495.00Current price is: $3,495.00.
Used MSD Pro Mag 44 Kit
How about another "Super Saver Deal" right here for all you racers out there on a tight budget looking to save over $3,200 bucks not having to buy new!!!
Check out this slightly Used MSD Pro Mag 44 Kit that's ready to get the job done... And for way less! This one features the popular PN 8130 small cap style Magneto that's currently set up with the clock wise (CW) rotation. However, it can be changed to the hemi rotation easily if you choose. It's equipped with the RCD style drive set-up on the bottom. And also comes complete with a slightly used MSD Pro Mag 44 Points Box (PN 8145) and MSD Pro Mag 44 Red Coil (PN 8142). All items were recently tested and good to go, so you know your money was well spent here. All components are in nice shape, free of any damage or repairs with your common slight cosmetic scratches from normal minimal use. This complete kit is in stock, ready to ship today and definitely ready for showtime!
For this exact set up brand new, expect to pay right at $7,200 bucks! And that's not including the wire set. So, if you're looking to upgrade your existing ignition system, need a spare for race day, or about to start on that new project in the race shop... Then this money saving deal's definitely for you! Helping racers do what they do best... For less! GoNitrolink.com
MAKE OFFER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used MSD Pro Mag 44 Wire Retainer
Here's another popular item for all our valued customers on a budget! This slightly
Used MSD Pro Mag 44 Wire Retainer part #7409 is the perfect item to pair up with the Pro Mag 44 Big Cap. It's one and only job is to keep all wires securely attached to each wire terminal while you break the beams at the other end! It installs easily, removes quickly with mounting hardware included. Order today and save!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Oil Pan Pick-Up
If your looking for a replacement, then this slightly Used Oil Pan Pick-Up is priced to save you a few bucks not having to buy new elsewhere! It's made of aluminum and in great shape with no damage or repairs. And could work with most any brand oil pan that's set up to accommodate a removable style pick-up like this one. It's accepts a -20 fitting size, however can be adapted to the smaller -16 size if you choose. Go with "Nitrolink" as we're always here to help get you ready for race day!
There’s only 2 places you can go to get your “Official Nitrolink Racing Gear” and that would be either in our pit area, or right here on our website!
Check out these awesome looking Nitrolink Racing T-Shirts that are being offered right here before you can even get them at the race track… This first addition design is available at a lower than normal price to help introduce our brand new website and services to all or valued customers! These high quality custom printed shirts are made of 100% cotton and come in black with multi-color printing on both the front and back. Join our winning team today and show everyone you know exactly where to go for high performance nitro and alcohol racing components! GoNitrolink.com
