Digital Dash Cover Lens
GoNitrolink.com is your one-stop shop for some of the coolest race parts on the planet... But, also their replacement parts as well! If you have one of our Racepak Digital Dash Covers, then it may be time to replace your scratched, worn out Digital Dash Cover Lens with a brand new one. Once you remove the protective covers seen in the photo, your crew chief will once again be able to see all your real time data on the starting line crystal clear once again. And not only are we going to make ordering 'em super easy. But also super affordable as well... Just click, pay and it's on the way!
Sold separately.
Digital Torque Wrench Tester
At the race track or back at the race shop, it's critical to be able to reach for a torque wrench that reads accurately every time you use it! Consistency wins races and this brand new Digital Torque Wrench Tester is the exact item needed to keep tabs on how consistent your torque wrench calibration is reading and when it's time to send out for service. This handy tool accommodates your 1/2" drive torque wrenches and has a push button conversion foot pounds to inches mode and a peak hold feature that saves your maximum reading. It's equipped with a back lit read out screen for night use and powers up using one standard 9-volt battery. Now you know where to go for all your specialty pit tools... Nitrolink!
Price: $695.00
Please call: (916) 425-1427 anytime to order.
Digital Valve Spring Tester
Efficiency at the track, as well as back at the race shop has always been a key component to winning races! And having access to the right tools to accomplish certain jobs quickly and easily makes all the difference! This brand new Digital Valve Spring Tester is sure to deliver everything you would expect, and then some... This quality unit is made of 6061 T-6 billet aluminum and equipped with 2" diameter plates that can handle almost any spring on the market and has a 5" travel capacity. The easy access controls on the front of the tester, along with the large, easy-to-read numbers on the back-lit screen makes it a breeze to run thru a set of springs in no time. It's capable of testing springs up to 1500 lbs; in 1 pound increments, with a digital travel readout in .001" increments. Equipped with a rotatable adjustable stop for fast measuring of open and closed spring pressures. And 3 mounting locations on the handle allow you to adjust the length for increased torque. The simple to use travel stop with 2 set screws is perfect for setting an exact position, allowing repeated testing at a specific installed spring height, or wide open lift (near coil bind). This unit is switchable from pounds to kilograms and operates on one 9V battery that's also included. Order one here today, then get ready to go to work!
Don Jackson BDK Valve
When it comes to fuel or air flow management, this current style Don Jackson BDK Valve is one of the most dependable and easiest ways to get the job done right! This ones brand new and made of light weight billet aluminum. It measures 9" tall and both the inlet/outlet are ready to accept your #8 or #10 size hose fittings (not included). It allows you to regulate fuel pressure making it easier on your fuel pump. Or they can also work in conjunction with your clutch management system by allowing you to adjust air pressure. In either application, just a simple turn of the valve on top does it all... They can work with any nitro, alcohol, or gas set-up's and this one's ready to be pressed into service right out of the box! Race, Win, Repeat! GoNitrolink.com
Donovan Aluminum 565 C.I. Big Block Chevy
Brand new with zero laps!!! And equipped with all the best parts money can buy is exactly what you'll find right here with this Donovan Aluminum 565 C.I. Big Block Chevy that's being sold complete, turn-key and ready for showtime!!! No expense was spared in outfitting this Race Engine with everything needed to be competitive on the race track. And the great news is, it won't cost you anything close to the $50,000 bucks it cost to build it... So let's get to it!!!
About the Engine:
• New Donovan Aluminum 565 C.I. Big Block Chevy
• New Standard Deck, Water Block
• New Dart Pro 1 Cylinder Heads
• New Victory Titanium Intake & Exhaust Valves
• New Wiseco Pistons
• New GRP Aluminum Rods
• New Callies Crankshaft
• New MSD Crank Trigger System
• New Comp Cams Roller Camshaft
• New Isky Roller Lifters
• New Manton Pushrods
• New RCD Gear Drive
• New Jesel Shaft Rockers
• New Williams Valve Covers
• New Edelbrock Low Profile Manifold
• Enderle Birdcatcher
• Enderle Barrel Valve
• Enderle Fuel Pump
• MSD Ignition System
• Custom Zoomie Headers
• New Meziere Billet Flywheel
• New Meziere Heavy Duty Starter
• Dan Olson Custom Oil Pan
• And much more...
Don't miss this opportunity to acquire this turn-key race engine with brand new components for you're very own!!! This complete package is available immediately and sure to save it's new owner thousands of dollars not having duplicate everything here. Then countless hours not having to put it all together from the ground up... Now you're ready to go on tour with the right equipment for the 2026 season!!!
Priced to move at: Only $31K OBO. All serious reasonable offers considered.
Double End AN Wrench Set - 7 Piece
"Nitrolink" also offers this style Double End AN Wrench Set - 7 Piece for a hassle-free environment at your race shop the next time you decide to assemble hose ends, or check all the lines on your race car. This 7 piece set, (3 AN to 20 AN) is made of 6061-T6 billet aluminum. The contoured edges make them comfortable to use. And the shorter design length helps to prevent over-tightening your hose ends. All wrenches are anodized, color coded and numbered for quick easy identification. And the perfect addition to any pit tool box!
Price
$168.95 Original price was: $168.95.$118.95Current price is: $118.95.
Total
$168.95 Original price was: $168.95.$118.95Current price is: $118.95.
Double End Pro Series AN Wrench Set
The exact same quality, strength and durabilty is offered here with less wrenches to carry! This anodized Double End Pro Series AN Wrench Set is made by XRP and works with the swivel nuts on hose ends. Each of the (4) wrenches are color coded so you know exactly what wrench to reach for to get the job done quickly. And the fully radiused edges offers a comfortable grip second to none. This set is made from heat treated 6061 aluminum alloy for lasting performance. And includes sizes: (-3, -4) ( -6, -8) (-10, -12) (-16 & -20). Now you know exactly where to go for all your specialty pit tool needs! GoNitrolink.com
Dragster Chassis Dolly
When it comes to high end racing components, specialty pit tools, or top quality support equipment like this brand new Dragster Chassis Dolly then "Nitrolink" has you covered! Quality craftsmanship is on display right here, starting with the durable steel frame, upgraded "correct style" wheels and quick release chassis tab pins, all ready to go to work. This style dolly was specifically designed to work in conjunction with your rear trailer elevator door if you're storing your dragster on the top deck of your larger style race trailer. It installs in front of the foot box and compensates for the extra length that a dragster has up front, by allowing that to overhang off the edge of the door while still supporting the majority of the race car. Once the desired door height is reached, the car can easily be rolled back into the upper bay with the help of the 360° swivel wheels, while keeping the front wheels of the race car up off the ground. It can also work well with stacker, or single level trailers, or when it comes to loading or unloading your race car in or out of tight pit areas by providing optimum maneuverability. It's professionally built, powdercoated black and ready to offer everything needed to get the job done quickly and efficiently while you're out on tour!
Starting at: $995.00
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Dragster Dual Chute Mounts
We have a few sets of slightly used Dragster Dual Chute Mounts at the race shop available and ready to ship today! They're sold in pairs, made of chrome moly tubing and anodized black for that cool stealth look. Tube diameter measures 7/8" total. And both weigh in at a light weight .7 pounds. They can be welded up as is, or fit inside your existing slightly larger size diameter tubing. Then held in place by your common style quick release pins, (not included). Then removed with your chute packs, etc; to allow you to pack both chutes on the ground, on top of a milk crate, etc; for a quick, easier pack. Another money saving item to help racers on a budget get to the winners circle!
Sold in sets.
Dragster Nose
Ready to start on that Dragster project out in the race shop yet? Well, then this next item could be exactly what you've been looking for... And let's save you both time and money buying it right here!!! This slightly used Dragster Nose is in nice shape, made of fiberglass, weighs 3 lbs. and measures: 30 3/8" long by 10 1/4" tall in the back. And 14" inside at it's widest point. We'll price this one accordingly, as it has a small crack that can easily be repaired on one side right at the bottom. After that, choose your paint color and get ready for the big day! Unmatched Customer Service, right here! GoNitrolink.com
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Dragster/Altered Headers
Check out this awesome looking set of Dragster/Altered Headers up for sale today! This set looks to be from either Triple T Race Products, or Hedman Headers. And could look great on your Top Fuel or Alcohol Dragster, AA/Fuel Altered, Drag Boat, Tractor Puller and so on... They're slightly used and in very nice shape with no visible damage. And set up to work with your 426 Hemi fuel heads made by Alan Johnson (up to Stage 5), or any BAE, or Dart, fuel heads. Tube diameter is the popular 2 1/2" size, with the standard degree bend. And this set is equipped with EGT bungs already installed to accept your Racepak or similar computer probes. Or, just cap them off if you're not running a computer. Both quality and craftsmanship are present here as you check out the built in separation plate design in between each pipe and the support rods added for extra strength and durability. And here's an extra added bonus to make the deal that much better! We'll throw in a complete set of (4) header brackets ready to accept you're blower restraint straps. Just add your own standard size release pins and head for the lanes!
Please note: This set will not fit if you're running "Fatheads."
Driver / Crew Nitro Masks
So, the fans sure love that morning dose of nitromethane fumes during a warm-up first thing in the morning on a race weekend! But the racers and crew... Maybe, not as much! So how about we offer these Driver/Crew Nitro Masks to make that process a lot easier for all of you to work with. These are made with a durable compression silicone rubber that provides exceptional comfort. The universal "one size fits most" design offers a balanced low pressure positive seal. They're equipped with a hard coated, anti-scratch, anti-fog treated poly-carbonate lens that offers an extended large panoramic field of vision. These masks are NIOSH Approved and fitted with 5 quick release buckles that allows for a fast easy removal and provide an even comfortable fit to prevent slipping. The quarter-size inhalation valves allows the user to inhale a larger volume of air per breath, allowing for more comfort and productivity. And a nylon storage/carrying bag is included as well. Order one, or a dozen with just a few clicks right here... Job done!
