We offers a complete line of all PSI Supercharger products!
PSI Screw Blower Mini Snout
Now here's an item that's sure to grab the attention of all you racers out there running a screw blower!
This brand new PSI Screw Blower Mini Snout is made of billet aluminum and works with your C, or D, style superchargers only. It's precision cut and o-ring equipped on the inside for a tight seal to prevent leaks. And mounts up to your front cover using 12 bolts to work with your 8, or 11, mm mini snout blower pulleys that attach with 6 bolts total. Inside shaft is heat treated for optimum strength making this high quality PSI performance product ready for battle if you are!
We offers a complete line of all PSI Supercharger products!
PSI Single Mag Drive
Ignition timing is critical when it comes to getting your race car from A to B as quickly and efficiently as possible, right! And that's were this brand new PSI Single Mag Drive comes into play. Probably one of the nicest designs on the market, this one works with your popular Dunn clover leaf style drive on your mags. It's anodized black for that awesome look and sure to offer a well finished, sleek, profiled component that performs just as good as it looks! Outside housing is made of billet aluminum and it comes complete with a bronze gear, oil pump shaft and belt already installed and ready to go to work! Top quality racing components taken to the next level! GoNitrolink.com
We offers a complete line of all PSI Supercharger products!
PSI Single Mag Drive Replacement Belt
"Nitrolink" is your one stop shop when it comes to PSI replacement parts! So why not let us help you keep your Magneto performing at it's best, to help get you in the winners circle! This PSI Single Mag Drive Replacement Belt is one of those items that can side line you quicker than your best E.T. And we sure don't want to see that! These Belts are easy to replace and can save you a whole lot of grief on race day if you have a spare ready to put into service if needed. Race weekends are way to short to be put on the trailer early because you couldn't make the call, so don't forget your spares!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
RCD 426 Hemi Offset Mag Drive
How about a nice clean profiled product that's sure to offer that professional look your race team is known for! This slightly used RCD 426 Hemi Offset Mag Drive is in excellent shape and free of any damage with normal minimal wear. It's made of billet aluminum and can work with your TFX, BAE, Keith Black, or JP1 cast or billet blocks. And equipped with the RCD style gear, steel shaft with a 5/16" size hex for your oil pump and bronze gear, all in very nice condition. Brand new, these go for right at $1350 bucks! But not here... Not today! Install this one right out of the box, set your mag, then pull to the lanes! Helping your team race for less, is what we do best! GoNitrolink.com
RCD Blower Starter
When it comes to "go time" on the starting line, then lets get this awesome looking super clean RCD Blower Starter pressed into service on your race team today! This one's slightly used and in great shape with very little normal minimal wear. It's the late model style, that's outfitted with a billet starter cage that's anodized black for that awesome look! It features the larger current style solenoid, starter switch and upgraded black plug that accepts any of the other color Anderson plugs on your starter cables. And check out the new built in stand on the bottom, to keep it upright to help avoid costly damage from rolling around in your tow vehicle or trailer during transport. All these features included for one great price! We only have one available for now... So, grab this one up right here and keep that extra $500 bucks in your pocket where it belongs not having to buy new elsewhere!
Winning "Starts" Here!!! GoNitrolink.com
Priced to move at: Only $2950.00
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Sitko 426 Hemi Mag Drive
If you're looking to simplify your ignition system, without have to run all the advanced and sometimes complicated timing control components then this brand new Sitko 426 Hemi Mag Drive just might be the answer. This top of the line quality component is the single mag, offset, air actuated style that allows you to retard your timing during the run either manually, or with the help of a simple timer system. It's made of billet aluminum, belt driven and equipped with a bronze gear and standard 5/16" stem. It comes complete with an idler bracket support and ready to accept your MSD or Mallory Magnetos that are equipped with the Dunn style gear. Hard to find racing components right here 24/7... GoNitrolink.com
Sitko Standard 426 Hemi Mag Drive
A top of the line quality component, with an affordable price!!! Is exactly what you'll find right here with this brand new Sitko Standard 426 Hemi Mag Drive that's ready to be pressed into service right out of the box! This single style mag drive is made of billet aluminum, with the standard offset. And is belt driven and equipped with a bronze gear and standard 5/16" stem. It comes complete with an idler bracket support and is ready to accept your MSD or Mallory Magnetos that are equipped with the Dunn style gear... Save more, race more, win more... GoNitrolink.com
Price
$195.00 Original price was: $195.00.$149.95Current price is: $149.95.
Total
$195.00 Original price was: $195.00.$149.95Current price is: $149.95.
Another BRAND NEW item... Without the brand new price!!!
Starter Dog - Fits PSI
Attention all racers out there running a PSI Screw Blower. This brand new small style Starter Dog - Fits PSI Superchargers only and is the exact item needed to help insure there are no unexpected problems at the line when it comes to firing your race car! Keeping your Starter Jaw in good shape not only helps extend the life of your Blower Starter, as a worn out Starter Dog quickly transfers to other key components on your Starter requiring extra down time, extra maintenance and extra expense. This one works specifically with the PSI mini snout using the smaller style pulleys and is equipped with the 1/2" drive for your turn-over bar for adjusting the clutch, finding TDC, adjusting the valves, etc. It's strong durable and made of heat treated billet steel and ready to go to work!
Taylor Blower Bag & Restraint
Outfit your ride with this upgraded Taylor Blower Bag & Restraint set-up that's up for grabs today!!! Install or remove it easily on your Nostalgia Nitro Funny Car or Top Fuel Dragster, Blown Alcohol Altered, Supercharged Gas Dragster, Drag Boat, Tractor Puller and so on...
This one's equipped with current cert tags, is in excellent shape and can work with many of the different brands of 6-71 Superchargers on the market. It's the upgraded Top Fuel model that meets the highest SFI 14.3 spec for Blower Restraints. Or, if you're running an alcohol car that requires the lower grade 14.2 Blower Restraint set-up, then you're in luck! Because this one will pass tech for you as well, no problem. The nomex cover and all straps are in nice shape with normal minimal wear. Top Plate is slightly used, in nice condition and free of any stress cracks or damage. And measures the standard 20 1/8" long by 10 5/8" wide. With the Blower opening measuring 10" long by 4 1/2" wide. PLEASE NOTE: Includes everything in the photos. Header Brackets and Pins are not included. So here's your chance to replace that crispy worn out Blower Bag on your race car... And save your team several hundred bucks at the same time by ordering everything right here!
Brand new this exact set-up will run you right at $1,850 bucks without the brackets & pins! But don't even think of spending that much when you can pick this one up right here for a fraction of the cost of new... Quality racing components + Unmatched customer service = GoNitrolink.com
We offer a complete line of all Taylor Motorsports Products!
Taylor Supercharger Restraint
If you're looking for unmatched quality that's second to none when it comes to Blower Restraints, then take a look at one of these Taylor Supercharger Restraint set-up's designed to fit any 6-71 to 14-71 Supercharger on the market. Available in either SFI 14.2 or SFI 14.3 spec, these blower bags are made of kevlar inside with a nomex outside. Injector straps, top blower restraint plate with straps, bottom manifold plate, 4 header brackets, 1 bell housing bracket, and 5 bracket pins, are also included to wrap up this very special package. Custom made for Nostalgia Top Fuel or Nostalgia Funny Cars running a 6-71 Blower, all the way up to Top Fuel Dragsters and Nitro Funny Cars running the 14-71 size. Quality and craftsmanship right here, so come and get it!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Battery Pack & Charger
Originally designed, developed and tested by a top fuel racer, this durable style Used Battery Pack & Charger was made Drag Packs... And this one here is in almost brand new condition, with very little track time! It's free of any damage or repairs and equipped with a super handy volt meter read-out that lets you know exactly what to expect on the starting line before you fire up. Or, when it's ready for a recharge. It can also power up your drop light, timing light, jumper cables, etc; using the external posts on the top. The charger plug-in is easily accessible and this quality built pack is ready to jump into action on the front line!
MAKE OFFER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Billet Blower Pulley Spacer
Making sure your top a bottom blower pulleys are lined up and working together for maximum performance is key. Proper alignment also helps extend blower belt life and reliability on the race track. And the way you adjust for that is by installing a slightly Used Billet Blower Pulley Spacer like this one. It's in nice shape, with the standard bolt pattern using your 3/8" size bolts (not included). It measures 1" thick, however can be turned down if needed to fit your exact specifications. And this one's sure to save the do it yourself racer a few bucks not having to buy new elsewhere!
