We offer a complete line of all Racepak products!
Here's one more example of how you can race smart by taking full advantage of monitoring one more area of valuable on-track race data!
Racepak Drive Shaft Sensor
This brand new Racepak Drive Shaft Sensor works with the popular Pro 2, Pro 1B, or Pro 1A data loggers. This 5/16" fine thread 1 inch sensor is triggered by magnets and works with the Racepak split collar with magnets to monitor drive shaft RPM. It plugs directly into your input A box using your sensor cable. And is responsible for sending RPM data to the input A box, then to the data logger. The road to the winners circle may be shorter than you think! GoNitrolink.com
We offer a complete line of all Racepak products!
Racepak Drive Shaft Sensor Mount Bracket
This brand new Racepak Drive Shaft Sensor Mount Bracket is made of light weight billet aluminum, anodized black and allows you to fasten your 5/16" Racepak driveshaft sensor to your 9" center section. The road to the winners circle may be shorter than you think! GoNitrolink.com
We offer a complete line of all Racepak products!
Racepak EGT Probe Nuts & Ferrules
Check out this complete set of (8) brand new Racepak EGT Probe Nuts & Ferrules that works with your standard 1/4" EGT probes. They install easily over your probes, then tighten down to your EGT bungs and are responsible for securing your probes to your headers. This set is another one of those items you should consider having as a spare. The road to the winners circle may be shorter than you think! GoNitrolink.com
Racepak Flow Meters, EGT's, Cables, Pressure & Temp Sensors, Analog Boxes & Much More!!!
We have a large supply of both new and slightly used Racepak parts available for your Pro 2, Pro 1B, Pro 1A, or SC-1000 on-board computer systems. And the great news is, everything listed here on our website is sure to save you quite a few bucks not having to buy new elsewhere! Check this item out...
Racepak EGT Probes
This brand new set of Racepak EGT Probes works with the popular Pro 2, Pro 1B, or Pro 1A data loggers. Each probe installs directly into each header, then the other side directly into your EGT boxes. They're responsible for helping monitor individual cylinder temperature and a complete set of nuts and ferrules are included as well. These items for the earlier style Racepak systems are getting tougher to come by, so order while you can because once they're gone, they're gone for good!
We offer a complete line of all Racepak products!
Here's one more example of how you can race smart by taking full advantage of monitoring one more area of valuable on-track race data!
Racepak Front Wheel Speed Sensor
This brand new Racepak Front Wheel Speed Sensor works with the popular Pro 2, Pro 1B, or Pro 1A data loggers. This 3/8" fine thread sensor is triggered by steel and is designed to monitor front wheel speed or drive shaft RPM. It plugs directly into your input A box using your sensor cable. And is responsible for sending data to the input A box, then to the data logger. The road to the winners circle may be shorter than you think! GoNitrolink.com
Price
$350.00 Original price was: $350.00.$249.95Current price is: $249.95.
Total
$350.00 Original price was: $350.00.$249.95Current price is: $249.95.
Racepak Flow Meters, EGT's, Cables, Pressure & Temp Sensors, Analog Boxes & Much More!!!
We have a large supply of both new and slightly used Racepak parts available for your Pro 2, Pro 1B, Pro 1A, or SC-1000 on-board computer systems. And the great news is, everything listed here on our website is sure to save you quite a few bucks not having to buy new elsewhere! Check this item out...
Racepak Infrared Rear Tire Temp Sensors
These brand new Racepak Infrared Rear Tire Temp Sensors work with the popular Pro 2, Pro 1B, or Pro 1A data loggers. They plug into your transducer that fits in your analog box and both are responsible for helping monitor individual rear tire temperature. These items for the earlier style Racepak systems are getting tougher to come by, so order while you can because once they're gone, they're gone for good!
Price below is for a set of (2) total.
We offer a complete line of all Racepak products!
Here's one more example of how you can race smart by taking full advantage of monitoring one more area of valuable on-track race data!
Racepak Manifold Temp Probe
Take a look at this brand new Racepak Manifold Temp Probe that works with the popular Pro 2, Pro 1B, or Pro 1A data loggers. It plugs directly into your intake manifold, or burst panel block off plate utilizing the 1/8" male NPT compression style fitting. The other side plugs into your temp cable that goes to your temp transducer in your analog box. And is responsible for helping sent data from the probe to your data logger. The road to the winners circle may be shorter than you think! GoNitrolink.com
Price
$70.00 Original price was: $70.00.$45.00Current price is: $45.00.
Total
$70.00 Original price was: $70.00.$45.00Current price is: $45.00.
Racepak Flow Meters, EGT's, Cables, Pressure & Temp Sensors, Analog Boxes & Much More!!!
We have a large supply of both new and slightly used Racepak parts available for your Pro 2, Pro 1B, Pro 1A, or SC-1000 on-board computer systems. And the great news is, everything listed here on our website is sure to save you quite a few bucks not having to buy new elsewhere! Check this item out...
Racepak Non Pass-Thru Analog Box Circuit Board
This brand new Racepak Non Pass-Thru Analog Box Circuit Board works with the popular Pro 2, Pro 1B, or Pro 1A data loggers. It a replacement for the main circuit board in your non pass-thru analog box if it gets damaged. These items for the earlier style Racepak systems are getting tougher to come by, so order while you can because once they're gone, they're gone for good!
We offer a complete line of all Racepak products!
Racepak On / Off Switch
Check out this brand new Racepak On/Off Switch that works with the popular Pro 2, Pro 1B, or Pro 1A data loggers. It plugs directly into your on/off cable, then into your input a box. And is responsible for turning your complete system on and off. Or starting recording time if you're running a Pro 1A system. This is definitely one of those items you should consider carrying as a spare! The road to the winners circle may be shorter than you think! GoNitrolink.com
Price
$70.00 Original price was: $70.00.$45.00Current price is: $45.00.
Total
$70.00 Original price was: $70.00.$45.00Current price is: $45.00.
Racepak Flow Meters, EGT's, Cables, Pressure & Temp Sensors, Analog Boxes & Much More!!!
We have a large supply of both new and slightly used Racepak parts available for your Pro 2, Pro 1B, Pro 1A, or SC-1000 on-board computer systems. And the great news is, everything listed here on our website is sure to save you quite a few bucks not having to buy new elsewhere! Check this item out...
Racepak Pass-Thru Analog Box Circuit Board
This brand new Racepak Pass-Thru Analog Box Circuit Board works with the popular Pro 2, Pro 1B, or Pro 1A data loggers. It's a replacement for the main circuit board in your pass-thru analog box if it gets damaged. These items for the earlier style Racepak systems are getting tougher to come by, so order while you can because once they're gone, they're gone for good!
Racepak Pro 1 Computer System
Check out this slightly used Racepak Pro 1 Computer System that's perfect for all our valued customers on a budget, that are ready to start taking full advantage of all the valuable tuning data Racepak Systems have to offer! And we'll make sure you're set up with some of the most popular functions without having to spend anywhere near $10 grand to do it!
To start off, both the data logger and components are in very nice shape and free of any damage or repairs. They're ready to install on your 7.0 Pro Dragster or Altered, Nostalgia
A/ Fuel Car, Blown Fuel Altered, Doorslammer, Tractor Puller, Drag Boat and so on. The Datalogger is equipped with dual fiber optic input ports and is capable of recording Engine RPM, Individual Exhaust Temp, G-Meter, Blower Boost, Oil Pressure, Fuel Pressure, Drive Shaft Speed and TDC as is. However, future upgrades can easily be added to monitor Fuel Flow, Manifold Temp, Pan Pressure, Clutch Temp and a whole lot more later down the road if you choose. Data logger recording time is 50 seconds. And the kit comes complete with Racepak Software, EGT Probes, Applicable Cables & Boxes, On/Off Switch and a brand new Removable SD Cartridge & Reader, brand new Charger, brand new internal battery in the datalogger and everything you see in the photos...
Helping your team race for less, is what we do best! GoNitrolink.com
Priced to move at: Only $2995. + shipping.
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Racepak Pro 2 Computer System
Check out this slightly used Racepak Pro 2 Computer System that's ready to install on your Top Fuel Dragster, Nitro Funny Car, Blown Fuel Altered, Top Alcohol Dragster or Funny Car, A/ Fuel, Tractor Puller, Drag Boat and so on. And we'll make sure your set up with some of the most popular functions so your team can start taking full advantage of all the valuable tuning data Racepak Systems have to offer... And lets get it done right here for one low price!
To start off, both the data logger and components are in very nice shape and free of any damage or repairs. In fact, we'll throw in a bunch of brand new components (listed below) to make this deal that much better. This system is capable of recording Engine RPM, Individual Exhaust Temp, G-Meter, Blower Boost, Oil Pressure, Fuel Pressure and Nozzle Pressure as is. However, future upgrades can easily be added to monitor Fuel Flow, Manifold Temp, Pan Pressure, Drive Shaft Speed, Clutch Temp and a whole lot more later down the road if you choose. Data logger recording time is 200 seconds and this system can work with your Racepak Digital Dash (not included) if you choose. And the kit comes complete with Racepak Software, EGT Probes, Applicable Cables & Boxes and a brand new Removable SD Cartridge & Reader, brand new On/Off Switch, brand new Charger, brand new internal battery in the datalogger and everything you see in the photos.
A Pro 2 System, identical to this one brand new from Racepak sold for right at $11,000 bucks! But we'll make sure you get set up for thousands less right here! So, get ready to save big time as this one's priced to move and definitely ready to go to work...
All the right tools to get the job done on race day, right here! GoNitrolink.com
Priced to move at: Only $6795. + shipping.
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
