Tel Tac II Digital Tachometer
Small, light weight and easy to read on the starting line! This brand new Tel Tac II Digital Tachometer is sure to provide your crew chief with the exact data needed to make any last second idle adjustments right before you bump it in! Equipped with an LCD digital readout and "telltale" memory, it's easy to configure and compatible with most engines and ignitions, to include MSD Pro Mag 44's, Vertex and Mallory Magnetos, or battery powered ignition systems. It turns on automatically when the engine is started and reads RPM in hundreds, from 500 RPM to over 12,000 RPM on V-8 engines, and to 15,000 RPM on smaller cylinder engines. After the engine's shut off, the highest RPM attained is shown for 30 minutes. This unit is powered by a 9-volt alkaline battery that should last for hundreds of hours and has a low battery warning when it's time to be replaced. And it comes complete with a wiring harness, mounting plate and instructions. Please note: This item will not work with odd fire V-6, V-4 with Vertex internal coil magneto, or 4-cylinder engines with EFI... Quality racing components available right here on our website 24/7! GoNitrolink.com
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
TFX '92 Complete 426 Hemi Gear Drive
Take a look at this slightly used TFX '92 Complete 426 Hemi Gear Drive that works with your TFX '92 blocks only... It's the 48° raised cam style, is in nice shape and includes the front cover, upgraded titanium crank hub, crank seal & housing, cam gear, cam hub, idler gear kit, crank gear, degree wheel, crank bolt and hardware. This set-up could work well on your Top Fuel or Nostalgia Dragster, Nitro or Alcohol Funny Car, AA/Fuel Altered, Pro Mod, Drag Boat, Tractor Puller and so on... The billet aluminum front cover is in nice shape with only minor nicks and scratches from normal minimal use. And works in conjunction with your BAE or AFT fuel pump extension (sold separately). The steel cam gear is the 11 hole style, also in nice shape and free of any damage with all teeth looking good to go. The crank gear included is dual keyed and the idler gear also gets the thumbs up. The cam hub is equipped with a 1/2" size hex and the RCD dual keyed crank hub and degree wheel are ready to install using the standard size crank bolt that's also included. This set-up can be used on both supercharged or un-blown applications. However, it will not adapt to your application if you're running a BAE or Keith Black block.
Why Buy New??? Expect to pay close to $1,800 Bucks for all these components buying new elsewhere. But don't even think about spending that much when you can pick this one up right here for a fraction of the cost... And have hundreds of dollars left over for other weekend expenses! This unit is available immediately and ready to ship out today...
Quality pre-owned & new racing components 24/7 right here! GoNitrolink.com
We offer a complete line of all Pit Pal products!
Trailer Door Cabinet Organizer
Nitrolink is excited to offer your race team top quality Pit Pal race trailer accessories for the exact same price as the manufacturer! And when optimum efficiency and organization matters, then check out this brand new Trailer Door Cabinet Organizer that's sure to check all the boxes! It's heavy duty, made of durable aluminum, tig welded and designed to last for years. It's equipped with a handy fold down work tray that can hold up to 40 lbs by itself. Plus, it can store up to 20 quarts of oil and 9 aerosol cans up top. And 2 rolls of paper towels on the bottom. Measurements are 25"W x 32"H x 6.75"D. Bottom Shelf 4.5"ID. And it can work just as well in your race shop, or garage... Shop here 24/7 for all your Pit Pal needs! GoNitrolink.com
Other styles & sizes also available.
Turn-Key Race Trailer
If you're looking for a nice, dependable basic style race trailer to get you back and forth to the races without all the expensive bells & whistles, then take a look at the "budget friendly" price on this one...
This Turn-Key Race Trailer is slightly used, in nice shape and outfitted with just the right amount of options to not only keep the cost down. But also offer your race team the "important" tools required to transport your valuable cargo efficiently to the next event. It tows straight, is white in color and ready for your sponsor's logo, lettering, or vinyl wrap if you choose... So let's get to it!!!
About the Trailer...
2014 Continental Cargo 28' Race Trailer
• Usable Floor Space measures: 306" long x 81" wide (between fender wells)
• Rear Door measures: 95.5" wide x 80" tall
• Double Side Doors measures: 77" tall x 46" wide
• Multiple Overhead Aluminum Cabinets
• Drivers Fire Suit/Helmet Cabinet
• Aluminum Work Bench 71" long x 23 1/2" deep
• Roof Air Conditioner
• Tool Boxes
• 12v Interior Lighting & 110V Outlet
• Multiple Floor Tie Down Anchors
• Multiple Side D-Ring Anchors
• Coin Flooring
• Fuel Jug Holder
• Tie Down & Aerosol Can Holders
• Spare Tire Compartment in Floor
• Adjustable Roof Vent
• Fold Down Cable Assist Rear Door
Fold Up Aluminum Ramp 3' long x 80" wide
• Side Door Aluminum Step
• LED Outside Pit Lighting
• Outside 110V Outlet
• Dual Axles
• Custom Aluminum Wheels
• Electric Brake System
• Electric Trailer Jack
• And Much More...
This complete basic style Race Trailer is turn-key, race ready and available immediately. And is sure to save its new owner thousands of dollars from buying new. And countless hours not having to set one up from scratch... Now you're ready to hit the road and join the 2026 season!!!
Priced to move at: Only $18,500 OBO
For more info, or to see in person call Brandon at: (916) 425-1427 anytime!
We offer a complete line of all Pit Pal products!
Universal Hanger
Nitrolink is excited to offer your race team top quality Pit Pal race trailer accessories for the exact same price as the manufacturer! And if your not quite sure what hanger would work best for you... Then consider this brand new Universal Hanger that has unlimited potential to help keep your race trailer organized and ready for showtime! This one's made of durable aluminum and ready to accept your helmet, fire suit, starter cables, extension cords, air hose, etc. It has a 5 lb. weight capacity and measures 3.5"W x 4"H x 2.5"D. Plus, it works just as well in your race shop, or garage... Shop here 24/7 for all your Pit Pal needs! GoNitrolink.com
Universal Parts Tray
Check out this Universal Parts Tray that's sure to help keep your race team efficient and organized on race day! This quality item is made of aluminum, so it can handle all the brake cleaner or parts washer solvent you can throw at it! And it works perfect under the engine when your bottom end technician is changing out bearings. Or when your cylinder head or clutch specialist is servicing those components on the work bench or on the ground. The outside edges measure the standard 17 3/4" x 26" total so it will stow away nicely under your pit table in between rounds. Or, in your race trailer during transport. Hard to find pit items available right here 24/7! GoNitrolink.com
Sold Separately
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used AFT Fuel Pump Extension
"Old School" style at a great price is what you'll find right here with this slightly Used AFT Fuel Pump Extension that's ready to bolt up right out of the box! This one's in nice shape, free of any damage or repairs and made of billet aluminum. It's the standard 5 1/2" size that works in conjunction with your older style cast aluminum gear drive front covers such as Keith Black, BAE, or JP1. This one has some slight machining on the bottom and fits over your fuel pump extension drive shaft, that runs off your cam gear (both sold separately). Another money saving product to help your racing budget go a little further! GoNitrolink.com
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used BAE Fuel Pump Extension
Another money saving product to help stretch your racing budget a little further is what you'll find right here with this slightly Used BAE Fuel Pump Extension that's ready to install and go racing! This one's in nice shape, free of any damage or repairs and made of billet aluminum. It's the standard 5 1/2" size that works in conjunction with your older style cast aluminum gear drive front covers such as Keith Black, BAE, or JP1. And fits over your fuel pump extension drive shaft, that runs off your cam gear (both sold separately). "Old School" style at a great price right here! GoNitrolink.com
Used Carbon Fiber Bucket
Attention in the Pits!!! Funny Cars & Altereds to the lanes please... And if you're running a BAE Block, with a Dry Sump Oil Pump then get ready to save BIG TIME! Check out this slightly Used Carbon Fiber Bucket that could offer a quicker, cleaner option than the standard fabric style diaper when it comes to removal & installation in between rounds. This one's light weight and works with your BAE 426 Hemi aluminum block. It's in great shape, super clean and was recently certed, and also outfitted with a brand new inside liner to make this deal that much better! And it also comes complete with a set of 4 upgraded kevlar chassis mount style straps. Both the bucket and straps are NHRA "tech friendly" with current SFI 7.1 tags, so you know your money was well spent here. And a set of 2 side absorbent pads are also included as well. Brand new, we sell these for right at $1500 bucks, so don't delay... Because just like on the race track, reaction time matters!
Racers helping Racers do what they do best... For Less! GoNitrolink.com
Used Y-Block
Get ready to press this slightly Used Y-Block into service and save yourself a few bucks right at the step! This one's in nice shape, anodized black and already loaded with (2) -8's and (1) -12 fitting included. However, these sizes can be changed out easily enough using your ORB fittings to meet your size requirements. So, if you're getting ready to hit the road soon for the race weekend, at this price... Don't forget your spare! Save, Race, Win, Repeat! GoNitrolink.com
"Nitrolink" offers a complete line of all Triple-T Race Products!
For over 25 years Triple T Race Products has been on the front line providing top quality pit area and race shop equipment second to none. They continue to supply the majority of the biggest name teams in both top fuel and nitro funny car with products that are put to the test under the harshest conditions every weekend. And continue to meet or exceed those expectations consistently! Check out the following quality product sure to deliver both unmatched service and a professional image your race team deserves...
Valve Straightening Tool - Triple-T
Being fully prepared is key to a successful race weekend! And having a brand new
Valve Straightening Tool - Triple-T in your race trailer like this one could make the difference of either going rounds, or going home! This high quality tool is offered in 3 different valve stem sizes: 5/16", 11/32", or 3/8" and definitely one of the nicest on the market. It was designed to be used as a last resort, when you're unable to replace a slightly bent valve with a new one. It fits securely in your vise and is made to last from heavy duty steel with a coated finish. And comes complete with a dial indicator for precision accuracy and a handle that's comfortable to work with... Specialty Pit Tools 24/7 right here! GoNitrolink.com
Price: $325.00 each.
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Vintage Filler Drivers Suit
Check out the "Nitrolink" Vintage Section right here on our website regularly because there's more items similar to this one on the way!!! But first, let's take you back to 1986 with this Vintage Filler Drivers Suit that's sure to offer any private collector that unforgettable look that the 80's was famous for! This one's the 2 piece style with multi colored stripes down the sides and original patches included. And even though it cannot be re-certed for use in any competition any longer, it can definitely offer it's new owner a trip down memory lane every time you see it! GoNitrolink.com
