RCD Blower Starter
When it comes to "go time" on the starting line, then lets get this awesome looking super clean RCD Blower Starter pressed into service on your race team today! This one's slightly used and in great shape with very little normal minimal wear. It's the late model style, that's outfitted with a billet starter cage that's anodized black for that awesome look! It features the larger current style solenoid, starter switch and upgraded black plug that accepts any of the other color Anderson plugs on your starter cables. And check out the new built in stand on the bottom, to keep it upright to help avoid costly damage from rolling around in your tow vehicle or trailer during transport. All these features included for one great price! We only have one available for now... So, grab this one up right here and keep that extra $500 bucks in your pocket where it belongs not having to buy new elsewhere!
Winning "Starts" Here!!! GoNitrolink.com
Priced to move at: Only $2950.00
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Another BRAND NEW item... Without the brand new price!!!
RCD Fuel Pump Extension
A successful race team watches every dollar spent... So, lets help save you a few bucks right here with this brand new RCD Fuel Pump Extension that's ready to perform just as well as it looks! This one's made of billet aluminum and is the 3" size that works in conjunction with your RCD gear drive front cover and fuel pump extension drive shaft, that runs off your cam gear (both sold separately). Another quality race product to help your racing budget go a little further! GoNitrolink.com
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
RCD Idler Assembly
If your looking for a top of the line product without the big price tag, then this slightly used RCD Idler Assembly just might be the answer! This one made of billet aluminum and works with your TFX, BAE, Keith Black or JP1 cast or billet blocks... And all components are in very nice shape and free of any damage or repairs. It's equipped with a 3" wide aluminum idler pulley and includes an idler bracket, idler brace, billet aluminum support rod, axle, washers and nuts... Quality Racing Components + Unmatched Customer Service = GoNitrolink.com
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
RCD Snout Clamp Belt Guard
Quality and craftsmanship is offered right here with this slightly used RCD Snout Clamp Belt Guard that's ready to install to make your ride look even more state of the art!!!
And while we're at it... Let's save you some hard earned cash right here so you don't have to spend over $600 bucks for a new one! This one's in very nice shape and free of any damage or repairs. It's the current, heavy-duty style that's made of billet aluminum and anodized black for that awesome look. And was designed to work with any brand of blower snout that measures 6" or longer, and has a 3 1/2" diameter. It also includes a built-in starter bracket, weighs in at a light weight 2.2 lbs. And can be installed or removed quickly utilizing the 2 allen bolts at the bottom... Save, Race, Win, Repeat! GoNitrolink.com
Sitko 426 Hemi Mag Drive
If you're looking to simplify your ignition system, without have to run all the advanced and sometimes complicated timing control components then this brand new Sitko 426 Hemi Mag Drive just might be the answer. This top of the line quality component is the single mag, offset, air actuated style that allows you to retard your timing during the run either manually, or with the help of a simple timer system. It's made of billet aluminum, belt driven and equipped with a bronze gear and standard 5/16" stem. It comes complete with an idler bracket support and ready to accept your MSD or Mallory Magnetos that are equipped with the Dunn style gear. Hard to find racing components right here 24/7... GoNitrolink.com
Sitko Standard 426 Hemi Mag Drive
A top of the line quality component, with an affordable price!!! Is exactly what you'll find right here with this brand new Sitko Standard 426 Hemi Mag Drive that's ready to be pressed into service right out of the box! This single style mag drive is made of billet aluminum, with the standard offset. And is belt driven and equipped with a bronze gear and standard 5/16" stem. It comes complete with an idler bracket support and is ready to accept your MSD or Mallory Magnetos that are equipped with the Dunn style gear... Save more, race more, win more... GoNitrolink.com
Slightly Used RCD Starter Dog
Keeping your Starter Dog in good shape not only helps extend the life of your Blower Starter. But also help insure there are no unexpected problems on the starting line when it comes to firing your race car... So, let's get your team set up with this Slightly Used RCD Starter Dog so you don't have to go spend over $150 bucks for a new one! This one's the popular 6 bolt style, and is equipped with the 1/2" drive slot for your turn-over bar for adjusting the clutch, finding TDC, adjusting the valves, etc. It's in nice shape, strong, made of billet steel and installs quickly using your hardware. So if you need one, here it is... If you have one, don't hit the road without a spare! GoNitrolink.com
Price
$195.00 Original price was: $195.00.$149.95Current price is: $149.95.
Total
$195.00 Original price was: $195.00.$149.95Current price is: $149.95.
Another BRAND NEW item... Without the brand new price!!!
Starter Dog - Fits PSI
Attention all racers out there running a PSI Screw Blower. This brand new small style Starter Dog - Fits PSI Superchargers only and is the exact item needed to help insure there are no unexpected problems at the line when it comes to firing your race car! Keeping your Starter Jaw in good shape not only helps extend the life of your Blower Starter, as a worn out Starter Dog quickly transfers to other key components on your Starter requiring extra down time, extra maintenance and extra expense. This one works specifically with the PSI mini snout using the smaller style pulleys and is equipped with the 1/2" drive for your turn-over bar for adjusting the clutch, finding TDC, adjusting the valves, etc. It's strong durable and made of heat treated billet steel and ready to go to work!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
TFX '92 Complete 426 Hemi Gear Drive
Take a look at this slightly used TFX '92 Complete 426 Hemi Gear Drive that works with your TFX '92 blocks only... It's the 48° raised cam style, is in nice shape and includes the front cover, upgraded titanium crank hub, crank seal & housing, cam gear, cam hub, idler gear kit, crank gear, degree wheel, crank bolt and hardware. This set-up could work well on your Top Fuel or Nostalgia Dragster, Nitro or Alcohol Funny Car, AA/Fuel Altered, Pro Mod, Drag Boat, Tractor Puller and so on... The billet aluminum front cover is in nice shape with only minor nicks and scratches from normal minimal use. And works in conjunction with your BAE or AFT fuel pump extension (sold separately). The steel cam gear is the 11 hole style, also in nice shape and free of any damage with all teeth looking good to go. The crank gear included is dual keyed and the idler gear also gets the thumbs up. The cam hub is equipped with a 1/2" size hex and the RCD dual keyed crank hub and degree wheel are ready to install using the standard size crank bolt that's also included. This set-up can be used on both supercharged or un-blown applications. However, it will not adapt to your application if you're running a BAE or Keith Black block.
Why Buy New??? Expect to pay close to $1,800 Bucks for all these components buying new elsewhere. But don't even think about spending that much when you can pick this one up right here for a fraction of the cost... And have hundreds of dollars left over for other weekend expenses! This unit is available immediately and ready to ship out today...
Quality pre-owned & new racing components 24/7 right here! GoNitrolink.com
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
TFX 426 Hemi Gear Drive Kit
How about a slightly used TFX 426 Hemi Gear Drive Kit that's loaded with a few brand new components to make the deal that much better! This one works with your TFX '96 and later billet blocks... It's the 48° raised cam style, is in nice shape and includes the front cover, crank seal & housing, new cam gear, new cam hub, new idler gear kit, new splined crank gear and used crank bolt. This set-up could work well on your Top Fuel or Nostalgia Dragster, Nitro or Alcohol Funny Car, AA/Fuel Altered, Pro Mod, Drag Boat, Tractor Puller and so on... The billet aluminum front cover is in nice shape with only minor nicks and scratches from normal minimal use. And works in conjunction with your RCD fuel pump extension (sold separately). The new steel cam gear is the 11 hole style. The new crank gear included is the RCD splined model. And the cam hub is equipped with a 5/8" size hex. This set-up can be used on both supercharged or un-blown applications. However, it will not adapt to your application if you're running a BAE or Keith Black block.
Why Buy New??? Expect to pay close to $1,700 Bucks for all these components buying new elsewhere. Or, you can pick this one up right here and have money left over to feed the team over the weekend! This unit is available immediately and ready to ship out today...
Unmatched Service & Great Prices right here! GoNitrolink.com
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used AFT Fuel Pump Extension
"Old School" style at a great price is what you'll find right here with this slightly Used AFT Fuel Pump Extension that's ready to bolt up right out of the box! This one's in nice shape, free of any damage or repairs and made of billet aluminum. It's the standard 5 1/2" size that works in conjunction with your older style cast aluminum gear drive front covers such as Keith Black, BAE, or JP1. This one has some slight machining on the bottom and fits over your fuel pump extension drive shaft, that runs off your cam gear (both sold separately). Another money saving product to help your racing budget go a little further! GoNitrolink.com
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used BAE Fuel Pump Extension
Another money saving product to help stretch your racing budget a little further is what you'll find right here with this slightly Used BAE Fuel Pump Extension that's ready to install and go racing! This one's in nice shape, free of any damage or repairs and made of billet aluminum. It's the standard 5 1/2" size that works in conjunction with your older style cast aluminum gear drive front covers such as Keith Black, BAE, or JP1. And fits over your fuel pump extension drive shaft, that runs off your cam gear (both sold separately). "Old School" style at a great price right here! GoNitrolink.com
