Billet Primer Nozzle & Bottle
Now you know exactly where to go to get your Billet Primer Nozzle & Bottle INCLUDING the Correct Bottles. Identical to what many of the pro nitro teams on tour are using! These nozzles are made of 6061 billet aluminum and designed to deliver the exact amount of fuel needed into the injector prior to start-up. And the bottles included are the perfect size to handle on the starting line. Or, the nozzles alone could work with several different styles of bottles out there if you prefer to use your own. So, if you pay close attention to even the small details, then here's the perfect item to give your race team that professional look it deserves! GoNitrolink.com
(Empty Bottle when not in use.)
Billet Remote Starter Button
Supplying your race team with all the right equipment to make sure you're prepared on race day is what we do best! So, check out this brand new Billet Remote Starter Button that allows you to crank over your motor from the engine compartment to help streamline the process when it comes to checking compression, doing a leak-down, setting valves, or turning over your engine to get oil pressure. It's quickly connected to your starter motor or solenoid prior to use, then easily removed when your done... Specialty Pit Tools taken to the next level! GoNitrolink.com
WARNING: Fully disconnect any coil wire(s) prior to use to help avoid accidental start up's in gear!!!
Billet Spark Plug Gap Tool
This light weight anodized Billet Spark Plug Gap Tool is the perfect item to outfit your race team with right before you hit the road! This handy high quality tool is a must if you're looking to save time at the race track. Comes complete with a side strap to open plug gap if needed. And allows you to breeze thru setting gap on a large or small amount of plugs in no time! Helping your team organize for the race weekend is what we do best! GoNitrolink.com
Billet Speed Handle - Valve Spring Compressor & Tester
Here's another item to help streamline your racing operation by providing quickness and leverage! This brand new Billet Speed Handle - Valve Spring Compressor & Tester works in conjunction with the bench top valve spring tester, or on-head valve spring compressor tools that are also available on our website. It's made of billet aluminum and equipped with a rotating contoured knob for optimum comfort while in use. It measures 6" long with (2) 7/16" hex positions, with the outside hex having a deep counter bore to help release the valve locks when used with the valve spring compressor tool. Add this handy time saving specialty tool to your shopping cart, then be ready for race day that much quicker!
Blower Stud Kits
The new racing season is in full swing! Making this the perfect opportunity to get a jump on this money saving offer... We have a limited supply of BRAND NEW Blower Stud Kits that are ready to ship out immediately. And check out the craftsmanship on this set... Awesome! Mandatory in both NHRA & IHRA competition, this set of (8) total could work with any roots style supercharger. And can be used on either regular or set-back style manifolds. They're machined from high quality aluminum, anodized black and equipped with a hex top for easy installation or removal. They measure 2.585" over all length, with a 7/16" size, #20 thread on top. And a 1/2" size, #13 thread going into the Manifold. Nuts sold separately. Supplies are limited so, if you need a set... Here they are! If you have a set... Then here's your spares!!!
Bottom End "Diver" Pads
Your Bottom End Crew Member is sure to think it's their birthday after you "gift" them with one of these Bottom End "Diver" Pads.They're comfortable and made of the highest quality marine grade vinyl, making them a breeze to clean up. They measure 52" x 26" and fold up quick and easy for storage practically anywhere in your race trailer or race shop. Quality racing components 24/7 right here! GoNitrolink.com
Sold Separately.
Bypass Jet Wrench
In the staging lanes it's always hurry up and wait, right! However if you need to do a lightning fast jet change right before your run, do we have the perfect tool for you! This handy Bypass Jet Wrench is anodized black and made of light weight billet aluminum. It has provisions to hold up to 8 different size jets in the handle. And equipped with a built in recessed hex at one end, to remove and tighten back up the plug on your barrel valve. And the correct size tip at the other end to install your new jet without causing damage. Carry everything needed right in your pocket, then go get it handled!
Jets in the photos are sold separately.
Camshaft Checker Tool
So, how about we streamline your race team a little more with a slightly used Camshaft Checker Tool that's ready to be pressed into service right out of the box! This one works with your 426 Hemi equipped with a .904 lifter bore size only. It's made of light weight aluminum and comes with an easy to read gauge that helps you degree your camshaft by displaying your cam lift. Plus, it's compact size makes it easy to store away nicely in your race trailer or race shop when not in use... Specialty Pit Tools 24/7 right here! GoNitrolink.com
Carbon Fiber Chute Boxes
Carbon Fiber on any race car is just awesome!!! And if you ever wondered how some of the pro teams are able to pack their chutes so square and uniform, then wonder no more... These brand new Carbon Fiber Chute Boxes are exactly what's needed to not only handle that task, but also make it so much easier to quickly pack your chutes in between rounds. No more wasted time with your chute and pilot falling out of the chute pack while your trying to load it. These boxes are professionally made, light weight, durable and ready to install. And can be purchased separately, or as a pair for single or dual chute applications... More carbon fiber racing products are on the way, so keep checking back! GoNitrolink.com
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Price
$98.95 Original price was: $98.95.$69.95Current price is: $69.95.
Total
$98.95 Original price was: $98.95.$69.95Current price is: $69.95.
Another BRAND NEW item... Without the brand new price!!!
Carbon Fiber Heel Cup
G-Force + Carbon Fiber = this next "Nitrolink" item that's sure to not only help fine tune your driving skills on race day. But also make your race car look that much cooler inside!!! This awesome looking Carbon Fiber Heel Cup is brand new and performs as well as it looks! It's made by McKinney Corp and the perfect item if your having a little difficulty at the starting line after you launch the car with your foot trying to move away from the throttle (not good!). It's very light weight, easy to install and provide that awesome look that only carbon fiber has to offer! Now you know exactly where to go for all the really cool racing parts! GoNitrolink.com
Carbon Fiber Oil Pump Bubble
Not only does this next item perform it's one and only job very well... But it also looks so cool doing it! Install a Carbon Fiber Oil Pump Bubble like this one on your race car if you're having a clearance problem with your oil pump wanting to extend out past the side panel. This super trick high performance component is light weight and measures 8 7/8 long, x 6 7/8" high x 1 3/4" deep. And helps provide that extra extension needed out past your side panel... Top of the line products, for your top of the line race team! GoNitrolink.com
Chassis Stabilizer - Rectangular
Here's one of the best ways to protect your investment!!! This brand new Chassis Stabilizer - Rectangular style was designed to help prevent costly chassis damage to your Dragster, Funny Car, Altered, Hot Rod, or any low ground clearance vehicle during transportation to and from the race track by keeping your vehicle stable. It's placed directly under your Race Car, Show Car or Collectible Car prior to transport to help eliminate constant excessive unwanted chassis flex in the trailer. It also helps protect on-board computers, electronics, suspension components, struts, springs, torsion bars, etc. And is highly recommended for all longer wheel base race cars. This one's the smaller 23 1/4" x 7" rectangular style, manufactured from durable rubber. This style works best on applications where the chassis is 1.125" to 3" from the trailer floor. Its sleek design and 1.125" deflated height allows it to slide under the lowest ground clearance vehicles and it inflates to an adjustable maximum height of 4". It comes complete with a 6' hose kit and a gate valve. To operate it, simply slide the deflated stabilizer under the most flexible point in the chassis and inflate it to 15-20 PSI... Quality hi-performance components taken to the next level! GoNitrolink.com
Round 10" lift style also available.
