Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Centerline Front Dragster/Altered Wheels
Check out this set of Used Centerline Front Dragster/Altered Wheels that are in great shape and up for grabs today! And if you're looking to stay within a tight budget, then this set may be the answer. Or, if you already have a set... At this low price, grab these up for spares! These are the Convo Pro style and are in nice shape and free of any damage or repairs, with only slight nicks and scratches from normal minimal use. They're the standard 17x2.5 size and fit the popular anglia spindles. Both inner and outer edges also have normal wear and the polished finish has a nice brilliant shine. And center caps are also included to wrap up this money saving offer. PLEASE NOTE: Tires are for show cars only and must be replaced before any competition. Just a few clicks on our website... And they'll be on your doorstep in no time!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Used Head Stud Nuts
How about a complete set of slightly Used Head Stud Nuts to help you stay within your racing budget this month for a change! This set of (26) total, are the 12 pt. style nuts that work with your 11/16" size socket. And fit your 9/16" fine thread size head studs. Add a can of peanut butter compound to your cart and you're all set for race day!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Used Head Stud Nuts
How about a complete set of slightly Used Head Stud Nuts to help you stay within your racing budget this month for a change... This set of (26) total, are the 12 pt. style nuts that work with your 11/16" size socket. And fit your smaller 1/2" fine thread size head studs. Add a can of peanut butter compound to your cart and you're all set for race day!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Pac 1360 Valve Springs
Lets offer a nice set of Used Pac 1360 Valve Springs for all our valued customers on a tight budget. This set of (16) total steel double springs measures 1 1/2" O.D. and have an installed height of 400 lbs. @ 2.250 and a coil bind of 1.190 total. All were recently tested with good numbers and perfect for having in your race trailer as a spare set. At this price, you can afford to be prepared on race day!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Rob Moore Coupler
So, lets offer this slightly Used Rob Moore Coupler at a fraction of the cost of new to help get you out on the starting line that much sooner! This one could work as a pinion support, or drive shaft coupler and measures 3.5" OAL. And equipped with 1 3/4" 40, fine splines inside and 2 3/4" 20, course splines outside. So if you need one quick, just click!
Used Y-Block
Get ready to press this slightly Used Y-Block into service and save yourself a few bucks right at the step! This one's in nice shape, anodized black and already loaded with (2) -8's and (1) -12 fitting included. However, these sizes can be changed out easily enough using your ORB fittings to meet your size requirements. So, if you're getting ready to hit the road soon for the race weekend, at this price... Don't forget your spare! Save, Race, Win, Repeat! GoNitrolink.com
Uyehara Bracket Altered
Complete, turn-key and ready to go racing!!! And if you're looking for a completely different way to fill your weekends with a whole lot of fun and excitement in 2027, then this nice used nostalgia style Uyehara Bracket Altered has your name all over it!!!
And the great news is, you'll load this one up for a fraction of the cost of new!
Check out the awesome stealth appearance this one has to let your competitors know you're there for one reason... To get the job done on race day! This quality built Uyehara race car is NHRA "tech friendly" and would be perfect for Nostalgia 2, B-Gas, or ? Best ET so far is: 8.40 @ 155 MPH on alcohol, as is. However, it can be set-up to run quicker if you choose with a few minor updates.
It's outfitted to accommodate a medium/large size driver, and features a custom flip-up fiberglass body for easy access to the drivers compartment. Along with top of the line components, a body that's ready for your custom paint or wrap. And a money saving price... So, let's get to it!
About the Car...
125" WB. Uyehara Chassis
• Shoulder Hoop is 20.5" across
• Bottom of Seat to Roll Cage Pads: 35.5”
• 500 C.I. Big Block Mopar
• Edelbrock Performer Cylinder Heads
• Edelbrock Victor Intake Manifold
• APD 1050 CFM Carburetor
• JE Pistons
• H-Beam Steel Rods
• Billet Crankshaft
• MSD Ignition System
• Magna Fuel Pump
• Meziere Remote Water Pump
• System 1 Oil Filter
• Frame Works Pro Air Shifter
• ATO Powerglide Transmission with Trans-Brake
• DP Torque Converter
• TCI Transmission Shield
• On-Board Water Cooling System
• Moroso Overflow Tank
• Mark Williams 9" Standard Rear End
• Custom Shorty Stainless Headers
• Misc. Gauges & Shift Light
• Air Armed On-Board Air Compressor
• Simpson Chute
Centerline Rear Wheels
• Billet 10 Spoke Front Wheels
• And much more...
So, here it is... Your chance to take the next step! This complete package is available immediately and sure to save it's new owner a whole lot of time and money not having to put it all together from the ground up! 2027 could be your year... So, let's make it happen!!!
Priced to move at: Only $22,950. All serious reasonable offers considered.
Valve Adjuster Tool
The days of adjusting your valves with a separate allen wrench & box end are over... This light weight heavy duty all in one Valve Adjuster Tool does it all... And it comes in either the 1/2" adjuster nut size for the Fuel Heads. Or the 7/16" size if your running Fat Heads. Both sizes are equipped with the common 3/16" size allen and make it a breeze to run thru a complete set of valves in no time. Pair this handy tool up with one of our Billet Dual Feeler Gauge Handles and show all your race fans out there how it's done correctly!
Valve Core Stem Tools
In drag racing, even the smallest details can make the difference between going to the winners circle, or going home early! So why let a small detail like not having one of these Valve Core Stem Tools at the ready when you need it most! This quality tool is light weight and made of billet aluminum with a durable stainless steel tip. It's loaded with 3 extra valve stems in the handle, just in case! The knurled cap and base provide easy access and use, while the red anodized finish assures that it stands out. Order yours today... Be better prepared for tomorrow!
Valve Cover Breathers & Wiggins Clamps
How about a nice state of the art set of Valve Cover Breathers & Wiggins Clamps that were designed to work with the titanium valve covers we offer here on our website! However, the great news is this set can also work with your application just as well. These are the largest size available that accept your 1 1/2" diameter size hose with the standard pattern mounting plate. And what's cool about this set is they're equipped with the super trick wiggens "clam shell" clamps to help keeps the hose ends from coming loose during competition. These breathers and clamps are the exact set-up that the majority of the top nitro teams are using because of how well they perform, their larger size and how quickly they can be removed. High end racing components taken to the next level! GoNitrolink.com
Valve Lash Adjusting Torque Wrench
How about a high quality precision Valve Lash Adjusting Torque Wrench tool all in one!!! It simplifies precision valve lash settings by properly torquing all adjuster nuts accurately. Preset to 22 lbs, it can be customized up to 26 lbs, and comes complete with the following: 1/8, 5/32, & 3/16" Hex Keys. And it accepts any standard 3/8 drive socket (not included). Take one of these to the race track once... Then wonder how you ever managed without one! GoNitrolink.com for all your specialty pit tool needs!
Valve Spring Compressor Tool
Made of billet aluminum and definitely one of the nicest on the market! This durable light weight Valve Spring Compressor Tool is designed to work with most all the popular size valve springs and has a dual adjustment capability for perfect positioning and easy access to valves and springs. It easily compresses springs to 1000 lbs. And the handle can be easily removed for use with your battery powered impact driver and socket to make the job that much quicker and easier. Now you know exactly where to go for all your specialty pit tool needs! GoNitrolink.com
Cylinder Head in the photo is for display only.
