Used RCD Blower Snout & Coupler
If you prefer to run name brand components on your race car, then check out this
Used RCD Blower Snout & Coupler that's in great shape and sure to deliver the quality and craftsmanship you've come to expect! This one's the 6 bolt style that measures 6 1/4" long. It's in very nice shape with no damage or repairs. And the polished finish has a nice brilliant shine with only slight nicks and scratches from normal use. Coupler included is also in nice used shape with no visible spline damage, etc. Grab your hardware (not included) and install this one right out of the box! "Supercharged Savings" daily at GoNitrolink.com
Priced to move at: Only $325.00
Price
$390.00 Original price was: $390.00.$195.00Current price is: $195.00.
Total
$390.00 Original price was: $390.00.$195.00Current price is: $195.00.
Another BRAND NEW item... Without the brand new price!!!
New 11mm - 57T - Quick Change Pulley
If you're looking for a New 11mm - 57T - Quick Change Pulley offered at a discounted price, then it's you're lucky day! This one's the GT, center flange model, that works with your quick change style crank hub and nut. It's made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. Pulley is anodized black for the cool visual factor and measures the standard 3 1/2" wide. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, or Tractor Puller and DROP THE HAMMER!!!
Another BRAND NEW item... Without the brand new price!!!
RCD 14mm - 34T - Blower Pulley
How about a BRAND NEW RCD 14mm - 34T - Blower Pulley without the brand new price! This one's a 14mm, 34 tooth, HTD style made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. Pulley is anodized black for that awesome look, measures 3 1/2" wide and could work on most any brand of 4-71, 6-71, 8,10,12, or 14-71 Superchargers on the market. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, Tractor Puller, Pro Street, or Hot Rod and DROP THE HAMMER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
RCD 426 Hemi Offset Mag Drive
How about a nice clean profiled product that's sure to offer that professional look your race team is known for! This slightly used RCD 426 Hemi Offset Mag Drive is in excellent shape and free of any damage with normal minimal wear. It's made of billet aluminum and can work with your TFX, BAE, Keith Black, or JP1 cast or billet blocks. And equipped with the RCD style gear, steel shaft with a 5/16" size hex for your oil pump and bronze gear, all in very nice condition. Brand new, these go for right at $1350 bucks! But not here... Not today! Install this one right out of the box, set your mag, then pull to the lanes! Helping your team race for less, is what we do best! GoNitrolink.com
RCD Blower Starter
When it comes to "go time" on the starting line, then lets get this awesome looking super clean RCD Blower Starter pressed into service on your race team today! This one's slightly used and in great shape with very little normal minimal wear. It's the late model style, that's outfitted with a billet starter cage that's anodized black for that awesome look! It features the larger current style solenoid, starter switch and upgraded black plug that accepts any of the other color Anderson plugs on your starter cables. And check out the new built in stand on the bottom, to keep it upright to help avoid costly damage from rolling around in your tow vehicle or trailer during transport. All these features included for one great price! We only have one available for now... So, grab this one up right here and keep that extra $500 bucks in your pocket where it belongs not having to buy new elsewhere!
Winning "Starts" Here!!! GoNitrolink.com
Priced to move at: Only $2950.00
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Another BRAND NEW item... Without the brand new price!!!
RCD Fuel Pump Extension
A successful race team watches every dollar spent... So, lets help save you a few bucks right here with this brand new RCD Fuel Pump Extension that's ready to perform just as well as it looks! This one's made of billet aluminum and is the 3" size that works in conjunction with your RCD gear drive front cover and fuel pump extension drive shaft, that runs off your cam gear (both sold separately). Another quality race product to help your racing budget go a little further! GoNitrolink.com
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
RCD Idler Assembly
If your looking for a top of the line product without the big price tag, then this slightly used RCD Idler Assembly just might be the answer! This one made of billet aluminum and works with your TFX, BAE, Keith Black or JP1 cast or billet blocks... And all components are in very nice shape and free of any damage or repairs. It's equipped with a 3" wide aluminum idler pulley and includes an idler bracket, idler brace, billet aluminum support rod, axle, washers and nuts... Quality Racing Components + Unmatched Customer Service = GoNitrolink.com
RCD Valve Cover Breathers
Let's get you set up with this slightly used set of quick disconnect RCD Valve Cover Breathers that are the popular 1 1/4" size. And could work on pretty much any application out there requiring a breather set-up. And what's cool about this set is that they're equipped with the super trick locking pin set-up that helps keep the hose end connectors from twisting loose during competition. And as you can see by the photo's, this set is in almost new condition, free of any cracks, or repairs with very little minimal wear. Mounting plates are the standard pattern as far as these go. And hose ends work with your 1 1/4" diameter hose size. (Hose sold separately.) Brand new price for a pair identical to these will set you back right at $369 Bucks... But not here! Click on the "buy now" button below and start saving! Helping racers do what they do best... For less! GoNitrolink.com
Slightly Used
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
RCD/Gates "1 Run" 1595 PolyChain GT Blower Belts
Now here's a smoke'n deal that's sure to help get all our valued customers on a budget ready for race day! We have a large supply of RCD/Gates "1 Run" 1595 PolyChain GT Blower Belts for sale and ready to ship! These are the stronger nitro kevlar models, that work with the 11mm pulleys and measure 84mm wide, have a 145 tooth count, with a GT tooth profile. They're slightly used and free of any visible damage, weather checking, or chaffing. Outside edges are nice and sharp with no fraying or visible wear. All teeth are free of any damage and ready to go to work! Brand new these sell for right at $280 bucks each. So if you need one, here it is! If you have one, don't leave home without a spare!!! Priced to move at only: $99.95 ea.
Price
$195.00 Original price was: $195.00.$149.95Current price is: $149.95.
Total
$195.00 Original price was: $195.00.$149.95Current price is: $149.95.
Another BRAND NEW item... Without the brand new price!!!
Starter Dog - Fits PSI
Attention all racers out there running a PSI Screw Blower. This brand new small style Starter Dog - Fits PSI Superchargers only and is the exact item needed to help insure there are no unexpected problems at the line when it comes to firing your race car! Keeping your Starter Jaw in good shape not only helps extend the life of your Blower Starter, as a worn out Starter Dog quickly transfers to other key components on your Starter requiring extra down time, extra maintenance and extra expense. This one works specifically with the PSI mini snout using the smaller style pulleys and is equipped with the 1/2" drive for your turn-over bar for adjusting the clutch, finding TDC, adjusting the valves, etc. It's strong durable and made of heat treated billet steel and ready to go to work!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used BBC Counter Weight Crank Hub
The next Big Block Chevy item would be this slightly Used BBC Counter Weight Crank Hub that was made by RCD. It's in great shape with very little track time and used in conjunction with your blower pulley and degree wheel. It's made of hardened steel, anodized black and equipped with a dual keyway. Install this one today and go give those hemi's a run for their money!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Magnesium Dual Mag Support
It's durable, light weight and priced to move! This slightly Used Magnesium Dual Mag Support is in nice shape and works with your angled idler assembly. It was designed to lock down and support your dual mag drive and bolts behind your idler plate. The top, made of aluminum does not match the magnesium base. However, it's priced accordingly and sure gives you the opportunity to save!
