Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Jet Nuts - 7/16"-20 Fine Thread - Pack of 10
These Jet Nuts - 7/16"-20 Fine Thread - Pack of 10 - are coated steel to fit your 1/2" size wrench. This is one of the most popular sizes found on most race cars, so it's able to be used in a wide variety of applications. This style of self locking nut works better than a standard nylock nut under high heat / high vibration racing conditions. And offers a much lower profile than standard nuts allowing you to use a reduced size wrench in tight areas. Now you know exactly where to go for hard to find racing hardware! GoNitrolink.com
Pro Cam Degree Wheel
Possibly the nicest one on the market, this Pro Cam Degree Wheel is quality made and ready to provide years of service to your racing operation. It's durable, made of sturdy aluminum, measures 11" in diameter and equipped with a color-coded scale for instant read-outs. Grab your cam card and dial in the desired spec for a precise degreed accurate setting. The exhaust and intake centerline areas are also indicated and color-coded. Add one to you're cart, pay easily and we'll handle the rest!
Price
$60.00 – $80.00Price range: $60.00 through $80.00
Total
$60.00 – $80.00Price range: $60.00 through $80.00
Racepak Flow Meters, EGT's, Cables, Pressure & Temp Sensors, Analog Boxes & Much More!!!
We have a large supply of both new and slightly used Racepak parts available for your Pro 2, Pro 1B, Pro 1A, or SC-1000 on-board computer systems. And the great news is, everything listed here on our website is sure to save you quite a few bucks not having to buy new elsewhere! Check this item out...
Used Racepak Sensor Extension Cable
This slightly Used Racepak Sensor Extension Cable works with the popular Pro 2, Pro 1B, or Pro 1A data loggers. It plugs into your existing sensor cable and simply extends the length before it gets plugs directly into your sensor on the other end. These items for the earlier style Racepak systems are getting tougher to come by, so order while you can because once they're gone, they're gone for good!
Supply is limited! Choose from the lengths available in the "options" menu below.
Price
$59.95 – $79.95Price range: $59.95 through $79.95
Total
$59.95 – $79.95Price range: $59.95 through $79.95
Racepak Flow Meters, EGT's, Cables, Pressure & Temp Sensors, Analog Boxes & Much More!!!
We have a large supply of both new and slightly used Racepak parts available for your Pro 2, Pro 1B, Pro 1A, or SC-1000 on-board computer systems. And the great news is, everything listed here on our website is sure to save you quite a few bucks not having to buy new elsewhere! Check this item out...
Used Racepak Input A or B Cable
This slightly Used Racepak Input A or B Cable works with the popular Pro 2, Pro 1B, or Pro 1A data loggers. It connects your analog box directly to the data logger, or can also connect your input A or B boxes to the data logger as well. These items for the earlier style Racepak systems are getting tougher to come by, so order while you can because once they're gone, they're gone for good!
Supply is limited! Choose from the lengths available in the "options" menu below.
Price
$59.95 – $79.95Price range: $59.95 through $79.95
Total
$59.95 – $79.95Price range: $59.95 through $79.95
Racepak Flow Meters, EGT's, Cables, Pressure & Temp Sensors, Analog Boxes & Much More!!!
We have a large supply of both new and slightly used Racepak parts available for your Pro 2, Pro 1B, Pro 1A, or SC-1000 on-board computer systems. And the great news is, everything listed here on our website is sure to save you quite a few bucks not having to buy new elsewhere! Check this item out...
Used Racepak Pro Dash Cable
This slightly Used Racepak Pro Dash Cable works with the popular Pro 2, Pro 1B, or Pro 1A data loggers. It plugs directly into your Racepak Pro Dash then into the data logger. And is responsible for supplying power and data readings to the dash unit. These items for the earlier style Racepak systems are getting tougher to come by, so order while you can because once they're gone, they're gone for good!
Supply is limited! Choose from the lengths available in the "options" menu below.
Price
$39.95 – $79.95Price range: $39.95 through $79.95
Total
$39.95 – $79.95Price range: $39.95 through $79.95
Racepak Flow Meters, EGT's, Cables, Pressure & Temp Sensors, Analog Boxes & Much More!!!
We have a large supply of both new and slightly used Racepak parts available for your Pro 2, Pro 1B, Pro 1A, or SC-1000 on-board computer systems. And the great news is, everything listed here on our website is sure to save you quite a few bucks not having to buy new elsewhere! Check this item out...
Used Racepak Analog A or B Cable
This slightly Used Racepak Analog A or B Cable works with the popular Pro 2, Pro 1B, or Pro 1A data loggers. It connects your analog boxes to each other to form a chain, or the longer length style can also connect analog boxes directly to the data logger. These items for the earlier style Racepak systems are getting tougher to come by, so order while you can because once they're gone, they're gone for good!
Supply is limited! Choose from the lengths available in the "options" menu below.
Racepak Flow Meters, EGT's, Cables, Pressure & Temp Sensors, Analog Boxes & Much More!!!
We have a large supply of both new and slightly used Racepak parts available for your Pro 2, Pro 1B, Pro 1A, or SC-1000 on-board computer systems. And the great news is, everything listed here on our website is sure to save you quite a few bucks not having to buy new elsewhere! Check this item out...
Used Racepak Sensor Cable
This slightly Used Racepak Sensor Cable works with the popular Pro 2, Pro 1B, or Pro 1A data loggers. It connects different sensors such as front wheel speed, drive shaft RPM, or wheelie bar first to your input box, then to your data logger. It can also work with your linear's as well. These items for the earlier style Racepak systems are getting tougher to come by, so order while you can because once they're gone, they're gone for good!
Supply is limited! Choose from the lengths available in the "options" menu below.
Billet Air Bleed
Attention all Crew Chiefs!!! Just prior to pulling your driver up into the starting beams, wouldn't it be great if you could do away with that whole push-lock tuning plug program you've been having to deal with? Well, this next item may be just what you're looking for! This custom Billet Air Bleed was designed specifically to adjust idle speed on blown nitro or alcohol engines where a specific RPM is critical for staging, starting line launch and clutch management. This high quality component is machined from billet aluminum, is durable, light weight and allows for precise adjustability in very small increments until fully closed. It mounts to your injector hat and has a serrated edge to assure fumble free adjustments when it's time to put down a number! Order today... And it's on the way!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Used Blower Front Cover Bolts
Lets offer a complete set with spares left over of these slightly Used Blower Front Cover Bolts to help keep everything sealed up and performing at its best! This set of (20) total, are the 12 pt. fine thread style bolts that measure 2" long and work with your 5/16" size socket. Save GoNitrolink.com to your favorites for all your specialty hardware needs!
Racepak Flow Meters, EGT's, Cables, Pressure & Temp Sensors, Analog Boxes & Much More!!!
We have a large supply of both new and slightly used Racepak parts available for your Pro 2, Pro 1B, Pro 1A, or SC-1000 on-board computer systems. And the great news is, everything listed here on our website is sure to save you quite a few bucks not having to buy new elsewhere! Check this item out...
Racepak Remote Differential Transducer Cable
This brand new Racepak Remote Differential Transducer Cable works with the popular Pro 2, Pro 1B, or Pro 1A data loggers. It works in conjunction with your 12V transducer that fits in your analog box with your other transducers. And is responsible for monitoring air pressure going into your injector or air scoop. These items for the earlier style Racepak systems are getting tougher to come by, so order while you can because once they're gone, they're gone for good!
Last one available, 112" length only.
We offer a complete line of all Racepak products!
Racepak EGT Probe Nuts & Ferrules
Check out this complete set of (8) brand new Racepak EGT Probe Nuts & Ferrules that works with your standard 1/4" EGT probes. They install easily over your probes, then tighten down to your EGT bungs and are responsible for securing your probes to your headers. This set is another one of those items you should consider having as a spare. The road to the winners circle may be shorter than you think! GoNitrolink.com
Price
$25.95 – $77.95Price range: $25.95 through $77.95
Total
$25.95 – $77.95Price range: $25.95 through $77.95
We offer a complete line of all MSD Products!
MSD 90° Distributor Plug Wire Boots - Pro Mag 44
"Nitrolink" is your one stop shop when you're ready to build that new set of plug wires to help keep your Pro Mag 44 performing at it's best! These MSD 90° Distributor Plug Wire Boots - Pro Mag 44 work with your Pro Mag 44 running the common 8.5 mm size wire. This high quality product is made of silicone, providing an excellent resistance to heat and maximum protection against spark loss. Designed to last, these boots are ready for race day!
Choose a package of 10, or box of 50 total in the "options" menu below.
